[Intel-gfx] [PATCH 1/3] drm/i915: Make pipe/transcoder offsets not depend on enum values

Imre Deak imre.deak at intel.com
Mon Nov 19 14:41:07 UTC 2018


Depending on the transcoder enum values to translate from transcoder
to pipe/transcoder register addresses can easily break if we add a new
transcoder. So remove the dependency by using named initializers.

Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/i915_pci.c | 52 ++++++++++++++++++++++++++++++-----------
 1 file changed, 38 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index 983ae7fd8217..1b81d7cb209e 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -33,16 +33,30 @@
 #define GEN(x) .gen = (x), .gen_mask = BIT((x) - 1)
 
 #define GEN_DEFAULT_PIPEOFFSETS \
-	.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
-			  PIPE_C_OFFSET, PIPE_EDP_OFFSET }, \
-	.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
-			   TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET }
+	.pipe_offsets = { \
+		[TRANSCODER_A] = PIPE_A_OFFSET,	\
+		[TRANSCODER_B] = PIPE_B_OFFSET, \
+		[TRANSCODER_C] = PIPE_C_OFFSET, \
+		[TRANSCODER_EDP] = PIPE_EDP_OFFSET, \
+	}, \
+	.trans_offsets = { \
+		[TRANSCODER_A] = TRANSCODER_A_OFFSET, \
+		[TRANSCODER_B] = TRANSCODER_B_OFFSET, \
+		[TRANSCODER_C] = TRANSCODER_C_OFFSET, \
+		[TRANSCODER_EDP] = TRANSCODER_EDP_OFFSET, \
+	}
 
 #define GEN_CHV_PIPEOFFSETS \
-	.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
-			  CHV_PIPE_C_OFFSET }, \
-	.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
-			   CHV_TRANSCODER_C_OFFSET }
+	.pipe_offsets = { \
+		[TRANSCODER_A] = PIPE_A_OFFSET, \
+		[TRANSCODER_B] = PIPE_B_OFFSET, \
+		[TRANSCODER_C] = CHV_PIPE_C_OFFSET, \
+	}, \
+	.trans_offsets = { \
+		[TRANSCODER_A] = TRANSCODER_A_OFFSET, \
+		[TRANSCODER_B] = TRANSCODER_B_OFFSET, \
+		[TRANSCODER_C] = CHV_TRANSCODER_C_OFFSET, \
+	}
 
 #define CURSOR_OFFSETS \
 	.cursor_offsets = { CURSOR_A_OFFSET, CURSOR_B_OFFSET, CHV_CURSOR_C_OFFSET }
@@ -592,12 +606,22 @@ static const struct intel_device_info intel_cannonlake_info = {
 
 #define GEN11_FEATURES \
 	GEN10_FEATURES, \
-	.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
-			  PIPE_C_OFFSET, PIPE_EDP_OFFSET, \
-			  PIPE_DSI0_OFFSET, PIPE_DSI1_OFFSET }, \
-	.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
-			   TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET, \
-			   TRANSCODER_DSI0_OFFSET, TRANSCODER_DSI1_OFFSET}, \
+	.pipe_offsets = { \
+		[TRANSCODER_A] = PIPE_A_OFFSET, \
+		[TRANSCODER_B] = PIPE_B_OFFSET, \
+		[TRANSCODER_C] = PIPE_C_OFFSET, \
+		[TRANSCODER_EDP] = PIPE_EDP_OFFSET, \
+		[TRANSCODER_DSI_0] = PIPE_DSI0_OFFSET, \
+		[TRANSCODER_DSI_1] = PIPE_DSI1_OFFSET, \
+	}, \
+	.trans_offsets = { \
+		[TRANSCODER_A] = TRANSCODER_A_OFFSET, \
+		[TRANSCODER_B] = TRANSCODER_B_OFFSET, \
+		[TRANSCODER_C] = TRANSCODER_C_OFFSET, \
+		[TRANSCODER_EDP] = TRANSCODER_EDP_OFFSET, \
+		[TRANSCODER_DSI_0] = TRANSCODER_DSI0_OFFSET, \
+		[TRANSCODER_DSI_1] = TRANSCODER_DSI1_OFFSET, \
+	}, \
 	GEN(11), \
 	.ddb_size = 2048, \
 	.has_logical_ring_elsq = 1
-- 
2.13.2



More information about the Intel-gfx mailing list