[Intel-gfx] [PATCH v2 01/15] drm/vblank: Allow dynamic per-crtc max_vblank_count
Daniel Vetter
daniel at ffwll.ch
Tue Nov 27 19:42:08 UTC 2018
On Tue, Nov 27, 2018 at 08:20:04PM +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> On i965gm we need to adjust max_vblank_count dynamically
> depending on whether the TV encoder is used or not. To
> that end add a per-crtc max_vblank_count that takes
> precedence over its device wide counterpart. The driver
> can now call drm_crtc_set_max_vblank_count() to configure
> the per-crtc value before calling drm_vblank_on().
>
> Also looks like there was some discussion about exynos needing
> similar treatment.
>
> v2: Drop the extra max_vblank_count!=0 check for the
> WARN(last!=current), will take care of it in i915 code (Daniel)
> WARN_ON(!inmodeset) (Daniel)
> WARN_ON(dev->max_vblank_count)
> Pimp up the docs (Daniel)
Yeah I'm happy with the pile of WARN_ON here. And docs look great too.
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>
> Cc: stable at vger.kernel.org
> Cc: Inki Dae <inki.dae at samsung.com>
> Cc: Daniel Vetter <daniel at ffwll.ch>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/drm_vblank.c | 45 +++++++++++++++++++++++++++++++++---
> include/drm/drm_device.h | 8 ++++++-
> include/drm/drm_vblank.h | 22 ++++++++++++++++++
> 3 files changed, 71 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
> index 98e091175921..cde71ee95a8f 100644
> --- a/drivers/gpu/drm/drm_vblank.c
> +++ b/drivers/gpu/drm/drm_vblank.c
> @@ -105,13 +105,20 @@ static void store_vblank(struct drm_device *dev, unsigned int pipe,
> write_sequnlock(&vblank->seqlock);
> }
>
> +static u32 drm_max_vblank_count(struct drm_device *dev, unsigned int pipe)
> +{
> + struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
> +
> + return vblank->max_vblank_count ?: dev->max_vblank_count;
> +}
> +
> /*
> * "No hw counter" fallback implementation of .get_vblank_counter() hook,
> * if there is no useable hardware frame counter available.
> */
> static u32 drm_vblank_no_hw_counter(struct drm_device *dev, unsigned int pipe)
> {
> - WARN_ON_ONCE(dev->max_vblank_count != 0);
> + WARN_ON_ONCE(drm_max_vblank_count(dev, pipe) != 0);
> return 0;
> }
>
> @@ -198,6 +205,7 @@ static void drm_update_vblank_count(struct drm_device *dev, unsigned int pipe,
> ktime_t t_vblank;
> int count = DRM_TIMESTAMP_MAXRETRIES;
> int framedur_ns = vblank->framedur_ns;
> + u32 max_vblank_count = drm_max_vblank_count(dev, pipe);
>
> /*
> * Interrupts were disabled prior to this call, so deal with counter
> @@ -216,9 +224,9 @@ static void drm_update_vblank_count(struct drm_device *dev, unsigned int pipe,
> rc = drm_get_last_vbltimestamp(dev, pipe, &t_vblank, in_vblank_irq);
> } while (cur_vblank != __get_vblank_counter(dev, pipe) && --count > 0);
>
> - if (dev->max_vblank_count != 0) {
> + if (max_vblank_count) {
> /* trust the hw counter when it's around */
> - diff = (cur_vblank - vblank->last) & dev->max_vblank_count;
> + diff = (cur_vblank - vblank->last) & max_vblank_count;
> } else if (rc && framedur_ns) {
> u64 diff_ns = ktime_to_ns(ktime_sub(t_vblank, vblank->time));
>
> @@ -1204,6 +1212,37 @@ void drm_crtc_vblank_reset(struct drm_crtc *crtc)
> }
> EXPORT_SYMBOL(drm_crtc_vblank_reset);
>
> +/**
> + * drm_crtc_set_max_vblank_count - configure the hw max vblank counter value
> + * @crtc: CRTC in question
> + * @max_vblank_count: max hardware vblank counter value
> + *
> + * Update the maximum hardware vblank counter value for @crtc
> + * at runtime. Useful for hardware where the operation of the
> + * hardware vblank counter depends on the currently active
> + * display configuration.
> + *
> + * For example, if the hardware vblank counter does not work
> + * when a specific connector is active the maximum can be set
> + * to zero. And when that specific connector isn't active the
> + * maximum can again be set to the appropriate non-zero value.
> + *
> + * If used, must be called before drm_vblank_on().
> + */
> +void drm_crtc_set_max_vblank_count(struct drm_crtc *crtc,
> + u32 max_vblank_count)
> +{
> + struct drm_device *dev = crtc->dev;
> + unsigned int pipe = drm_crtc_index(crtc);
> + struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
> +
> + WARN_ON(dev->max_vblank_count);
> + WARN_ON(!READ_ONCE(vblank->inmodeset));
> +
> + vblank->max_vblank_count = max_vblank_count;
> +}
> +EXPORT_SYMBOL(drm_crtc_set_max_vblank_count);
> +
> /**
> * drm_crtc_vblank_on - enable vblank events on a CRTC
> * @crtc: CRTC in question
> diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h
> index 42411b3ea0c8..45e43ce9652f 100644
> --- a/include/drm/drm_device.h
> +++ b/include/drm/drm_device.h
> @@ -184,7 +184,13 @@ struct drm_device {
> * races and imprecision over longer time periods, hence exposing a
> * hardware vblank counter is always recommended.
> *
> - * If non-zeor, &drm_crtc_funcs.get_vblank_counter must be set.
> + * This is the statically configured device wide maximum. The driver
> + * can instead choose to use a runtime configurable per-crtc value
> + * &drm_vblank_crtc.max_vblank_count, in which case @max_vblank_count
> + * must be left at zero. See drm_crtc_set_max_vblank_count() on how
> + * to use the per-crtc value.
> + *
> + * If non-zero, &drm_crtc_funcs.get_vblank_counter must be set.
> */
> u32 max_vblank_count; /**< size of vblank counter register */
>
> diff --git a/include/drm/drm_vblank.h b/include/drm/drm_vblank.h
> index 6ad9630d4f48..e528bb2f659d 100644
> --- a/include/drm/drm_vblank.h
> +++ b/include/drm/drm_vblank.h
> @@ -128,6 +128,26 @@ struct drm_vblank_crtc {
> * @last: Protected by &drm_device.vbl_lock, used for wraparound handling.
> */
> u32 last;
> + /**
> + * @max_vblank_count:
> + *
> + * Maximum value of the vblank registers for this crtc. This value +1
> + * will result in a wrap-around of the vblank register. It is used
> + * by the vblank core to handle wrap-arounds.
> + *
> + * If set to zero the vblank core will try to guess the elapsed vblanks
> + * between times when the vblank interrupt is disabled through
> + * high-precision timestamps. That approach is suffering from small
> + * races and imprecision over longer time periods, hence exposing a
> + * hardware vblank counter is always recommended.
> + *
> + * This is the runtime configurable per-crtc maximum set through
> + * drm_crtc_set_max_vblank_count(). If this is used the driver
> + * must leave the device wide &drm_device.max_vblank_count at zero.
> + *
> + * If non-zero, &drm_crtc_funcs.get_vblank_counter must be set.
> + */
> + u32 max_vblank_count;
> /**
> * @inmodeset: Tracks whether the vblank is disabled due to a modeset.
> * For legacy driver bit 2 additionally tracks whether an additional
> @@ -206,4 +226,6 @@ bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
> void drm_calc_timestamping_constants(struct drm_crtc *crtc,
> const struct drm_display_mode *mode);
> wait_queue_head_t *drm_crtc_vblank_waitqueue(struct drm_crtc *crtc);
> +void drm_crtc_set_max_vblank_count(struct drm_crtc *crtc,
> + u32 max_vblank_count);
> #endif
> --
> 2.18.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list