[Intel-gfx] [PATCH] drm/i915/icl: combo port vswing programming changes per BSPEC
Clint Taylor
clinton.a.taylor at intel.com
Fri Nov 30 23:22:03 UTC 2018
On 11/30/2018 03:15 PM, Imre Deak wrote:
> On Fri, Nov 30, 2018 at 02:58:01PM -0800, clinton.a.taylor at intel.com wrote:
>> From: Clint Taylor <clinton.a.taylor at intel.com>
>>
>> In August 2018 the BSPEC changed the ICL port programming sequence to
>> closely resemble earlier gen programming sequence.
>>
>> BSpec: 21257
>> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
>> Cc: Imre Deak <imre.deak at intel.com>
>> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
>> Signed-off-by: Clint Taylor <clinton.a.taylor at intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_reg.h | 4 +
>> drivers/gpu/drm/i915/intel_ddi.c | 223 +++++++++++++----------------------
>> drivers/gpu/drm/i915/intel_display.c | 3 -
>> 3 files changed, 86 insertions(+), 144 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> index d3ef979..e632e99 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -1866,6 +1866,10 @@ enum i915_power_well_id {
>>
>> #define CNL_PORT_TX_DW7_GRP(port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 7))
>> #define CNL_PORT_TX_DW7_LN0(port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 7))
>> +#define ICL_PORT_TX_DW7_AUX(port) _MMIO(_ICL_PORT_TX_DW_AUX(7, port))
>> +#define ICL_PORT_TX_DW7_GRP(port) _MMIO(_ICL_PORT_TX_DW_GRP(7, port))
>> +#define ICL_PORT_TX_DW7_LN0(port) _MMIO(_ICL_PORT_TX_DW_LN(7, 0, port))
>> +#define ICL_PORT_TX_DW7_LN(port, ln) _MMIO(_ICL_PORT_TX_DW_LN(7, ln, port))
>> #define N_SCALAR(x) ((x) << 24)
>> #define N_SCALAR_MASK (0x7F << 24)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
>> index 61d7145..219464e9 100644
>> --- a/drivers/gpu/drm/i915/intel_ddi.c
>> +++ b/drivers/gpu/drm/i915/intel_ddi.c
>> @@ -493,103 +493,63 @@ struct cnl_ddi_buf_trans {
>> { 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
>> };
>>
>> -struct icl_combo_phy_ddi_buf_trans {
>> - u32 dw2_swing_select;
>> - u32 dw2_swing_scalar;
>> - u32 dw4_scaling;
>> -};
>> -
>> -/* Voltage Swing Programming for VccIO 0.85V for DP */
>> -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_85V[] = {
>> - /* Voltage mV db */
>> - { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
>> - { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
>> - { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
>> - { 0x2, 0x98, 0x900F }, /* 400 9.5 */
>> - { 0xB, 0x70, 0x0018 }, /* 600 0.0 */
>> - { 0xB, 0x70, 0x3015 }, /* 600 3.5 */
>> - { 0xB, 0x70, 0x6012 }, /* 600 6.0 */
>> - { 0x5, 0x00, 0x0018 }, /* 800 0.0 */
>> - { 0x5, 0x00, 0x3015 }, /* 800 3.5 */
>> - { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
>> -};
>> -
>> -/* FIXME - After table is updated in Bspec */
>> -/* Voltage Swing Programming for VccIO 0.85V for eDP */
>> -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_85V[] = {
>> - /* Voltage mV db */
>> - { 0x0, 0x00, 0x00 }, /* 200 0.0 */
>> - { 0x0, 0x00, 0x00 }, /* 200 1.5 */
>> - { 0x0, 0x00, 0x00 }, /* 200 4.0 */
>> - { 0x0, 0x00, 0x00 }, /* 200 6.0 */
>> - { 0x0, 0x00, 0x00 }, /* 250 0.0 */
>> - { 0x0, 0x00, 0x00 }, /* 250 1.5 */
>> - { 0x0, 0x00, 0x00 }, /* 250 4.0 */
>> - { 0x0, 0x00, 0x00 }, /* 300 0.0 */
>> - { 0x0, 0x00, 0x00 }, /* 300 1.5 */
>> - { 0x0, 0x00, 0x00 }, /* 350 0.0 */
>> +/* icl_combo_phy_ddi_translations */
>> +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_dp[] = {
>> + /* NT mV Trans mV db */
>> + { 0xA, 0x35, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
>> + { 0xA, 0x4F, 0x37, 0x00, 0x08 }, /* 350 500 3.1 */
>> + { 0xC, 0x71, 0x2F, 0x00, 0x10 }, /* 350 700 6.0 */
>> + { 0x6, 0x7F, 0x2B, 0x00, 0x14 }, /* 350 900 8.2 */
>> + { 0xA, 0x4C, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */
>> + { 0xC, 0x73, 0x34, 0x00, 0x0B }, /* 500 700 2.9 */
>> + { 0x6, 0x7F, 0x2F, 0x00, 0x10 }, /* 500 900 5.1 */
>> + { 0xC, 0x6C, 0x3C, 0x00, 0x03 }, /* 650 705 0.6 */
>> + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 900 3.5 */
>> + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */
>> };
>>
>> -/* Voltage Swing Programming for VccIO 0.95V for DP */
>> -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_95V[] = {
>> - /* Voltage mV db */
>> - { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
>> - { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
>> - { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
>> - { 0x2, 0x98, 0x900F }, /* 400 9.5 */
>> - { 0x4, 0x98, 0x0018 }, /* 600 0.0 */
>> - { 0x4, 0x98, 0x3015 }, /* 600 3.5 */
>> - { 0x4, 0x98, 0x6012 }, /* 600 6.0 */
>> - { 0x5, 0x76, 0x0018 }, /* 800 0.0 */
>> - { 0x5, 0x76, 0x3015 }, /* 800 3.5 */
>> - { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
>> +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_edp_lowswing[] = {
>> + /* NT mV Trans mV db */
>> + { 0x0, 0x7F, 0x3F, 0x00, 0x00 }, /* 200 200 0.0 */
>> + { 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 200 250 1.9 */
>> + { 0x1, 0x7F, 0x33, 0x00, 0x0C }, /* 200 300 3.5 */
>> + { 0x9, 0x7F, 0x31, 0x00, 0x0E }, /* 200 350 4.9 */
>> + { 0x8, 0x7F, 0x3F, 0x00, 0x00 }, /* 250 250 0.0 */
>> + { 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 250 300 1.6 */
>> + { 0x9, 0x7F, 0x35, 0x00, 0x0A }, /* 250 350 2.9 */
>> + { 0x1, 0x7F, 0x3F, 0x00, 0x00 }, /* 300 300 0.0 */
>> + { 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 300 350 1.3 */
>> + { 0x9, 0x7F, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
>> };
>>
>> -/* FIXME - After table is updated in Bspec */
>> -/* Voltage Swing Programming for VccIO 0.95V for eDP */
>> -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_95V[] = {
>> - /* Voltage mV db */
>> - { 0x0, 0x00, 0x00 }, /* 200 0.0 */
>> - { 0x0, 0x00, 0x00 }, /* 200 1.5 */
>> - { 0x0, 0x00, 0x00 }, /* 200 4.0 */
>> - { 0x0, 0x00, 0x00 }, /* 200 6.0 */
>> - { 0x0, 0x00, 0x00 }, /* 250 0.0 */
>> - { 0x0, 0x00, 0x00 }, /* 250 1.5 */
>> - { 0x0, 0x00, 0x00 }, /* 250 4.0 */
>> - { 0x0, 0x00, 0x00 }, /* 300 0.0 */
>> - { 0x0, 0x00, 0x00 }, /* 300 1.5 */
>> - { 0x0, 0x00, 0x00 }, /* 350 0.0 */
>> +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_edp_hbr3[] = {
>> + /* NT mV Trans mV db */
>> + { 0xA, 0x35, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
>> + { 0xA, 0x4F, 0x37, 0x00, 0x08 }, /* 350 500 3.1 */
>> + { 0xC, 0x71, 0x2F, 0x00, 0x10 }, /* 350 700 6.0 */
>> + { 0x6, 0x7F, 0x2B, 0x00, 0x14 }, /* 350 900 8.2 */
>> + { 0xA, 0x4C, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */
>> + { 0xC, 0x73, 0x34, 0x00, 0x0B }, /* 500 700 2.9 */
>> + { 0x6, 0x7F, 0x2F, 0x00, 0x10 }, /* 500 900 5.1 */
>> + { 0xC, 0x6C, 0x3C, 0x00, 0x03 }, /* 650 700 0.6 */
>> + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 900 3.5 */
>> + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */
>> };
>>
>> -/* Voltage Swing Programming for VccIO 1.05V for DP */
>> -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_1_05V[] = {
>> - /* Voltage mV db */
>> - { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
>> - { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
>> - { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
>> - { 0x2, 0x98, 0x900F }, /* 400 9.5 */
>> - { 0x4, 0x98, 0x0018 }, /* 600 0.0 */
>> - { 0x4, 0x98, 0x3015 }, /* 600 3.5 */
>> - { 0x4, 0x98, 0x6012 }, /* 600 6.0 */
>> - { 0x5, 0x71, 0x0018 }, /* 800 0.0 */
>> - { 0x5, 0x71, 0x3015 }, /* 800 3.5 */
>> - { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
>> +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_hdmi[] = {
>> + /* NT mV Trans mV db */
>> + { 0xA, 0x60, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */
>> + { 0xB, 0x73, 0x36, 0x00, 0x09 }, /* 450 650 3.2 */
>> + { 0x6, 0x7F, 0x31, 0x00, 0x0E }, /* 450 850 5.5 */
>> + { 0xB, 0x73, 0x3F, 0x00, 0x00 }, /* 650 650 0.0 ALS */
>> + { 0x6, 0x7F, 0x37, 0x00, 0x08 }, /* 650 850 2.3 */
>> + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 850 850 0.0 */
>> + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */
>> };
>>
>> -/* FIXME - After table is updated in Bspec */
>> -/* Voltage Swing Programming for VccIO 1.05V for eDP */
>> -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_1_05V[] = {
>> - /* Voltage mV db */
>> - { 0x0, 0x00, 0x00 }, /* 200 0.0 */
>> - { 0x0, 0x00, 0x00 }, /* 200 1.5 */
>> - { 0x0, 0x00, 0x00 }, /* 200 4.0 */
>> - { 0x0, 0x00, 0x00 }, /* 200 6.0 */
>> - { 0x0, 0x00, 0x00 }, /* 250 0.0 */
>> - { 0x0, 0x00, 0x00 }, /* 250 1.5 */
>> - { 0x0, 0x00, 0x00 }, /* 250 4.0 */
>> - { 0x0, 0x00, 0x00 }, /* 300 0.0 */
>> - { 0x0, 0x00, 0x00 }, /* 300 1.5 */
>> - { 0x0, 0x00, 0x00 }, /* 350 0.0 */
>> +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_mipi[] = {
>> + /* NT mV Trans mV db */
>> + { 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
>> };
>>
>> struct icl_mg_phy_ddi_buf_trans {
>> @@ -870,43 +830,27 @@ static int skl_buf_trans_num_entries(enum port port, int n_entries)
>> }
>> }
>>
>> -static const struct icl_combo_phy_ddi_buf_trans *
>> +static const struct cnl_ddi_buf_trans *
>> icl_get_combo_buf_trans(struct drm_i915_private *dev_priv, enum port port,
>> int type, int *n_entries)
>> {
>> - u32 voltage = I915_READ(ICL_PORT_COMP_DW3(port)) & VOLTAGE_INFO_MASK;
>>
>> if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) {
>> - switch (voltage) {
>> - case VOLTAGE_INFO_0_85V:
>> - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_85V);
>> - return icl_combo_phy_ddi_translations_edp_0_85V;
>> - case VOLTAGE_INFO_0_95V:
>> - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_95V);
>> - return icl_combo_phy_ddi_translations_edp_0_95V;
>> - case VOLTAGE_INFO_1_05V:
>> - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_1_05V);
>> - return icl_combo_phy_ddi_translations_edp_1_05V;
>> - default:
>> - MISSING_CASE(voltage);
>> - return NULL;
>> - }
>> - } else {
>> - switch (voltage) {
>> - case VOLTAGE_INFO_0_85V:
>> - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_85V);
>> - return icl_combo_phy_ddi_translations_dp_hdmi_0_85V;
>> - case VOLTAGE_INFO_0_95V:
>> - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_95V);
>> - return icl_combo_phy_ddi_translations_dp_hdmi_0_95V;
>> - case VOLTAGE_INFO_1_05V:
>> - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_1_05V);
>> - return icl_combo_phy_ddi_translations_dp_hdmi_1_05V;
>> - default:
>> - MISSING_CASE(voltage);
>> - return NULL;
>> - }
>> + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_lowswing);
>> + return icl_combo_phy_ddi_translations_edp_lowswing;
>> + } else if (type == INTEL_OUTPUT_EDP) {
>> + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr3);
>> + return icl_combo_phy_ddi_translations_edp_hbr3;
>> + } else if ((type == INTEL_OUTPUT_DP) || (type == INTEL_OUTPUT_DDI) ||
>> + (type == INTEL_OUTPUT_DP_MST)) {
>> + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp);
>> + return icl_combo_phy_ddi_translations_dp;
>> + } else if (type == INTEL_OUTPUT_HDMI) {
>> + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_hdmi);
>> + return icl_combo_phy_ddi_translations_hdmi;
>> }
>> +
>> + return NULL;
>> }
>>
>> static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port)
>> @@ -2463,7 +2407,7 @@ static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder,
>> static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
>> u32 level, enum port port, int type)
>> {
>> - const struct icl_combo_phy_ddi_buf_trans *ddi_translations = NULL;
>> + const struct cnl_ddi_buf_trans *ddi_translations = NULL;
>> u32 n_entries, val;
>> int ln;
>>
>> @@ -2477,34 +2421,23 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
>> level = n_entries - 1;
>> }
>>
>> - /* Set PORT_TX_DW5 Rterm Sel to 110b. */
>> + /* Set PORT_TX_DW5 */
>> val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
>> - val &= ~RTERM_SELECT_MASK;
>> + val &= ~(SCALING_MODE_SEL_MASK | RTERM_SELECT_MASK |
>> + TAP2_DISABLE | TAP3_DISABLE);
>> + val |= SCALING_MODE_SEL(0x2);
>> val |= RTERM_SELECT(0x6);
>> - I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
>> -
>> - /* Program PORT_TX_DW5 */
>> - val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
>> - /* Set DisableTap2 and DisableTap3 if MIPI DSI
>> - * Clear DisableTap2 and DisableTap3 for all other Ports
>> - */
>> - if (type == INTEL_OUTPUT_DSI) {
>> - val |= TAP2_DISABLE;
>> - val |= TAP3_DISABLE;
>> - } else {
>> - val &= ~TAP2_DISABLE;
>> - val &= ~TAP3_DISABLE;
>> - }
>> + val |= TAP3_DISABLE;
>> I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
>>
>> /* Program PORT_TX_DW2 */
>> val = I915_READ(ICL_PORT_TX_DW2_LN0(port));
>> val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
>> RCOMP_SCALAR_MASK);
>> - val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_select);
>> - val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_select);
>> + val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel);
>> + val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel);
>> /* Program Rcomp scalar for every table entry */
>> - val |= RCOMP_SCALAR(ddi_translations[level].dw2_swing_scalar);
>> + val |= RCOMP_SCALAR(0x98);
>> I915_WRITE(ICL_PORT_TX_DW2_GRP(port), val);
>>
>> /* Program PORT_TX_DW4 */
>> @@ -2513,9 +2446,17 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
>> val = I915_READ(ICL_PORT_TX_DW4_LN(port, ln));
>> val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
>> CURSOR_COEFF_MASK);
>> - val |= ddi_translations[level].dw4_scaling;
>> + val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1);
>> + val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2);
>> + val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff);
>> I915_WRITE(ICL_PORT_TX_DW4_LN(port, ln), val);
>> }
>> +
>> + /* Program PORT_TX_DW7 */
>> + val = I915_READ(ICL_PORT_TX_DW7_LN0(port));
>> + val &= ~N_SCALAR_MASK;
>> + val |= N_SCALAR(ddi_translations[level].dw7_n_scalar);
>> + I915_WRITE(ICL_PORT_TX_DW7_GRP(port), val);
>> }
>>
>> static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 789f647bd..6c125ae 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -15435,9 +15435,6 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder)
>>
>> /* notify opregion of the sanitized encoder state */
>> intel_opregion_notify_encoder(encoder, connector && has_active_crtc);
>> -
>> - if (INTEL_GEN(dev_priv) >= 11)
>> - icl_sanitize_encoder_pll_mapping(encoder);
> This looks unrelated/not explained in the commit message. The port
> clocking programming looks still the same, so I don't understand why we
> wouldn't need the above.
Oops, forgot to remove this debug code.
-Clint
>> }
>>
>> void i915_redisable_vga_power_on(struct drm_i915_private *dev_priv)
>> --
>> 1.9.1
>>
More information about the Intel-gfx
mailing list