[Intel-gfx] [PATCH v2 2/3] drm/i915: Use the correct crtc when sanitizing plane mapping
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Oct 4 17:24:37 UTC 2018
On Wed, Oct 03, 2018 at 06:12:42PM +0200, Daniel Vetter wrote:
> On Wed, Oct 03, 2018 at 05:50:17PM +0300, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > When we decide that a plane is attached to the wrong pipe we try
> > to turn off said plane. However we are passing around the crtc we
> > think that the plane is supposed to be using rather than the crtc
> > it is currently using. That doesn't work all that well because
> > we may have to do vblank waits etc. and the other pipe might
> > not even be enabled here. So let's pass the plane's current crtc to
> > intel_plane_disable_noatomic() so that it can its job correctly.
> >
> > To do that semi-cleanly we also have to change the plane readout
> > to record the plane's visibility into the bitmasks of the crtc
> > where the plane is currently enabled rather than to the crtc
> > we want to use for the plane.
> >
> > One caveat here is that our active_planes bitmask will get confused
> > if both planes are enabled on the same pipe. Fortunately we can use
> > plane_mask to reconstruct active_planes sufficiently since
> > plane_mask still has the same meaning (is the plane visible?)
> > during readout. We also have to do the same during the initial
> > plane readout as the second plane could clear the active_planes
> > bit the first plane had already set.
> >
> > v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel)
> > Add Daniel's proposed comment to better document why we do this
> > Drop the redundant intel_set_plane_visible() call
> >
> > Cc: stable at vger.kernel.org # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe
> > Cc: stable at vger.kernel.org
> > Cc: Dennis <dennis.nezic at utoronto.ca>
> > Cc: Daniel Vetter <daniel at ffwll.ch>
> > Tested-by: Dennis <dennis.nezic at utoronto.ca>
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
> > Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout")
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> I have the illusion of understanding this stuff now.
>
> Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>
> But let's see whether testers and CI agree :-)
Seems to be reasonably happy :)
Picked up another tested-by from the bug report
Tested-by: Peter Nowee <peter.nowee at gmail.com>
and pushed the series to dinq. Thanks to everyone involved.
> -Daniel
>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 78 +++++++++++++++++++++---------------
> > 1 file changed, 46 insertions(+), 32 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index d2828159f6c8..f0d004641b0d 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -2764,20 +2764,33 @@ intel_set_plane_visible(struct intel_crtc_state *crtc_state,
> >
> > plane_state->base.visible = visible;
> >
> > - /* FIXME pre-g4x don't work like this */
> > - if (visible) {
> > + if (visible)
> > crtc_state->base.plane_mask |= drm_plane_mask(&plane->base);
> > - crtc_state->active_planes |= BIT(plane->id);
> > - } else {
> > + else
> > crtc_state->base.plane_mask &= ~drm_plane_mask(&plane->base);
> > - crtc_state->active_planes &= ~BIT(plane->id);
> > - }
> >
> > DRM_DEBUG_KMS("%s active planes 0x%x\n",
> > crtc_state->base.crtc->name,
> > crtc_state->active_planes);
> > }
> >
> > +static void fixup_active_planes(struct intel_crtc_state *crtc_state)
> > +{
> > + struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
> > + struct drm_plane *plane;
> > +
> > + /*
> > + * Active_planes aliases if multiple "primary" or cursor planes
> > + * have been used on the same (or wrong) pipe. plane_mask uses
> > + * unique ids, hence we can use that to reconstruct active_planes.
> > + */
> > + crtc_state->active_planes = 0;
> > +
> > + drm_for_each_plane_mask(plane, &dev_priv->drm,
> > + crtc_state->base.plane_mask)
> > + crtc_state->active_planes |= BIT(to_intel_plane(plane)->id);
> > +}
> > +
> > static void intel_plane_disable_noatomic(struct intel_crtc *crtc,
> > struct intel_plane *plane)
> > {
> > @@ -2787,6 +2800,7 @@ static void intel_plane_disable_noatomic(struct intel_crtc *crtc,
> > to_intel_plane_state(plane->base.state);
> >
> > intel_set_plane_visible(crtc_state, plane_state, false);
> > + fixup_active_planes(crtc_state);
> >
> > if (plane->id == PLANE_PRIMARY)
> > intel_pre_disable_primary_noatomic(&crtc->base);
> > @@ -2805,7 +2819,6 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
> > struct drm_i915_gem_object *obj;
> > struct drm_plane *primary = intel_crtc->base.primary;
> > struct drm_plane_state *plane_state = primary->state;
> > - struct drm_crtc_state *crtc_state = intel_crtc->base.state;
> > struct intel_plane *intel_plane = to_intel_plane(primary);
> > struct intel_plane_state *intel_state =
> > to_intel_plane_state(plane_state);
> > @@ -2900,10 +2913,6 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
> > plane_state->fb = fb;
> > plane_state->crtc = &intel_crtc->base;
> >
> > - intel_set_plane_visible(to_intel_crtc_state(crtc_state),
> > - to_intel_plane_state(plane_state),
> > - true);
> > -
> > atomic_or(to_intel_plane(primary)->frontbuffer_bit,
> > &obj->frontbuffer_bits);
> > }
> > @@ -15494,17 +15503,6 @@ void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
> > POSTING_READ(DPLL(pipe));
> > }
> >
> > -static bool intel_plane_mapping_ok(struct intel_crtc *crtc,
> > - struct intel_plane *plane)
> > -{
> > - enum pipe pipe;
> > -
> > - if (!plane->get_hw_state(plane, &pipe))
> > - return true;
> > -
> > - return pipe == crtc->pipe;
> > -}
> > -
> > static void
> > intel_sanitize_plane_mapping(struct drm_i915_private *dev_priv)
> > {
> > @@ -15516,13 +15514,20 @@ intel_sanitize_plane_mapping(struct drm_i915_private *dev_priv)
> > for_each_intel_crtc(&dev_priv->drm, crtc) {
> > struct intel_plane *plane =
> > to_intel_plane(crtc->base.primary);
> > + struct intel_crtc *plane_crtc;
> > + enum pipe pipe;
> >
> > - if (intel_plane_mapping_ok(crtc, plane))
> > + if (!plane->get_hw_state(plane, &pipe))
> > + continue;
> > +
> > + if (pipe == crtc->pipe)
> > continue;
> >
> > DRM_DEBUG_KMS("%s attached to the wrong pipe, disabling plane\n",
> > plane->base.name);
> > - intel_plane_disable_noatomic(crtc, plane);
> > +
> > + plane_crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> > + intel_plane_disable_noatomic(plane_crtc, plane);
> > }
> > }
> >
> > @@ -15690,23 +15695,32 @@ void i915_redisable_vga(struct drm_i915_private *dev_priv)
> > }
> >
> > /* FIXME read out full plane state for all planes */
> > -static void readout_plane_state(struct intel_crtc *crtc)
> > +static void readout_plane_state(struct drm_i915_private *dev_priv)
> > {
> > - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > - struct intel_crtc_state *crtc_state =
> > - to_intel_crtc_state(crtc->base.state);
> > struct intel_plane *plane;
> > + struct intel_crtc *crtc;
> >
> > - for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
> > + for_each_intel_plane(&dev_priv->drm, plane) {
> > struct intel_plane_state *plane_state =
> > to_intel_plane_state(plane->base.state);
> > - enum pipe pipe;
> > + struct intel_crtc_state *crtc_state;
> > + enum pipe pipe = PIPE_A;
> > bool visible;
> >
> > visible = plane->get_hw_state(plane, &pipe);
> >
> > + crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> > + crtc_state = to_intel_crtc_state(crtc->base.state);
> > +
> > intel_set_plane_visible(crtc_state, plane_state, visible);
> > }
> > +
> > + for_each_intel_crtc(&dev_priv->drm, crtc) {
> > + struct intel_crtc_state *crtc_state =
> > + to_intel_crtc_state(crtc->base.state);
> > +
> > + fixup_active_planes(crtc_state);
> > + }
> > }
> >
> > static void intel_modeset_readout_hw_state(struct drm_device *dev)
> > @@ -15738,13 +15752,13 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
> > if (crtc_state->base.active)
> > dev_priv->active_crtcs |= 1 << crtc->pipe;
> >
> > - readout_plane_state(crtc);
> > -
> > DRM_DEBUG_KMS("[CRTC:%d:%s] hw state readout: %s\n",
> > crtc->base.base.id, crtc->base.name,
> > enableddisabled(crtc_state->base.active));
> > }
> >
> > + readout_plane_state(dev_priv);
> > +
> > for (i = 0; i < dev_priv->num_shared_dpll; i++) {
> > struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
> >
> > --
> > 2.16.4
> >
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list