[Intel-gfx] [PATCH v2 1/4] drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
Manasi Navare
manasi.d.navare at intel.com
Mon Oct 8 19:23:32 UTC 2018
On Mon, Oct 01, 2018 at 07:03:52PM +0300, Ville Syrjälä wrote:
> On Wed, Sep 12, 2018 at 03:57:16PM -0700, Manasi Navare wrote:
> > This patch fixes the original commit c0cfb10d9e1de49 ("drm/i915/edp:
> > Do not do link training fallback or prune modes on EDP") that causes
> > a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350)
> > where first link training fails and a retraining is required by falling
> > back to lower link rate/lane count.
> > In case of some panels they advertise higher link rate/lane count
> > than whats required for supporting the panel's native mode.
> > But we always link train at highest link rate/lane count for eDP
> > and if that fails we can still fallback to lower link rate/lane count
> > as long as the fallback link BW still fits the native mode to avoid
> > pruning the panel's native mode yet retraining at fallback values
> > to recover from a blank screen.
> >
> > v2:
> > * Send uevent if link failure on eDP unconditionally
> >
> > Cc: Clinton Taylor <clinton.a.taylor at intel.com>
> > Cc: Jani Nikula <jani.nikula at linux.intel.com>
> > Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> > Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> > Cc: Lucas De Marchi <lucas.demarchi at intel.com>
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338
> > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > Tested-by: Alexander Wilson <alexander.wilson at ncf.edu>
> > ---
> > drivers/gpu/drm/i915/intel_dp.c | 29 +++++++++++++++++++
> > drivers/gpu/drm/i915/intel_dp_link_training.c | 26 ++++++-----------
> > 2 files changed, 38 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index 436c22de33b6..e4de5257cd87 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -557,6 +557,21 @@ static bool intel_dp_link_params_valid(struct intel_dp *intel_dp, int link_rate,
> > return true;
> > }
> >
> > +static bool intel_dp_can_link_train_fallback_for_edp(struct intel_dp *intel_dp,
> > + int link_rate,
> > + uint8_t lane_count)
> > +{
> > + struct drm_display_mode *fixed_mode = intel_dp->attached_connector->panel.fixed_mode;
>
> const
>
Will add const to the fixed_mode.
> > + int mode_rate, max_rate;
> > +
> > + mode_rate = intel_dp_link_required(fixed_mode->clock, 18);
> > + max_rate = intel_dp_max_data_rate(link_rate, lane_count);
> > + if (mode_rate > max_rate)
> > + return false;
>
> I wonder if we should extract this into a helper and share with
> mode_valid(). Then again, it's just a few lines so maybe not worth it.
>
> > +
> > + return true;
> > +}
> > +
> > int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
> > int link_rate, uint8_t lane_count)
> > {
> > @@ -566,9 +581,23 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
> > intel_dp->num_common_rates,
> > link_rate);
> > if (index > 0) {
> > + if (intel_dp_is_edp(intel_dp) &&
> > + !intel_dp_can_link_train_fallback_for_edp(intel_dp,
> > + intel_dp->common_rates[index - 1],
> > + lane_count)) {
> > + DRM_DEBUG_KMS("Retrying Link training for eDP with same parameters\n");
> > + return 0;
> > + }
> > intel_dp->max_link_rate = intel_dp->common_rates[index - 1];
> > intel_dp->max_link_lane_count = lane_count;
> > } else if (lane_count > 1) {
> > + if (intel_dp_is_edp(intel_dp) &&
> > + !intel_dp_can_link_train_fallback_for_edp(intel_dp,
> > + intel_dp_max_common_rate(intel_dp),
> > + lane_count >> 1)) {
> > + DRM_DEBUG_KMS("Retrying Link training for eDP with same parameters\n");
> > + return 0;
> > + }
> > intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
> > intel_dp->max_link_lane_count = lane_count >> 1;
>
> This whole thing is getting a bit messy. I think it would worthwile to
> rewrite this as something like:
>
> intel_dp_update_link_train_fallback_values(intel_dp)
> {
> int link_rate = intel_dp->link_rate;
> int lane_count = intel_dp->lane_count;
>
> if (intel_dp_get_link_train_fallback_values(intel_dp, &link_rate, &lane_count))
> return -1;
>
> if (is_edp() && !edp_can_link_train_thing(link_rate, lane_count)) {
> DRM_DEBUG_KMS("...");
> return 0;
> }
>
> intel_dp->max_link_rate = link_rate;
> intel_dp->max_link_lane_count = lane_count;
>
> return 0;
> }
>
> But that can be done later. With the missing const added this patch is
> Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
Yes this can be refactored/reorganized as a follow up patch, also when downclock mode
checks get in.
So until then thsi fix is good to be merged right?
Manasi
> > } else {
> > diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
> > index a9f40985a621..30be0e39bd5f 100644
> > --- a/drivers/gpu/drm/i915/intel_dp_link_training.c
> > +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
> > @@ -367,22 +367,14 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
> > return;
> >
> > failure_handling:
> > - /* Dont fallback and prune modes if its eDP */
> > - if (!intel_dp_is_edp(intel_dp)) {
> > - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Link Training failed at link rate = %d, lane count = %d",
> > - intel_connector->base.base.id,
> > - intel_connector->base.name,
> > - intel_dp->link_rate, intel_dp->lane_count);
> > - if (!intel_dp_get_link_train_fallback_values(intel_dp,
> > - intel_dp->link_rate,
> > - intel_dp->lane_count))
> > - /* Schedule a Hotplug Uevent to userspace to start modeset */
> > - schedule_work(&intel_connector->modeset_retry_work);
> > - } else {
> > - DRM_ERROR("[CONNECTOR:%d:%s] Link Training failed at link rate = %d, lane count = %d",
> > - intel_connector->base.base.id,
> > - intel_connector->base.name,
> > - intel_dp->link_rate, intel_dp->lane_count);
> > - }
> > + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Link Training failed at link rate = %d, lane count = %d",
> > + intel_connector->base.base.id,
> > + intel_connector->base.name,
> > + intel_dp->link_rate, intel_dp->lane_count);
> > + if (!intel_dp_get_link_train_fallback_values(intel_dp,
> > + intel_dp->link_rate,
> > + intel_dp->lane_count))
> > + /* Schedule a Hotplug Uevent to userspace to start modeset */
> > + schedule_work(&intel_connector->modeset_retry_work);
> > return;
> > }
> > --
> > 2.18.0
>
> --
> Ville Syrjälä
> Intel
More information about the Intel-gfx
mailing list