[Intel-gfx] [PATCH v12 2/2] drm/i915: Allow "max bpc" property to limit pipe_bpp
Lisovskiy, Stanislav
stanislav.lisovskiy at intel.com
Thu Oct 11 07:55:15 UTC 2018
On Wed, 2018-10-10 at 17:12 -0700, Radhakrishna Sripada wrote:
> Use the newly added "max bpc" connector property to limit pipe bpp.
>
> V3: Use drm_connector_state to access the "max bpc" property
> V4: Initialize the drm property, add suuport to DP(Ville)
> V5: Use the property in the connector and fix CI failure(Ville)
> V6: Use the core function to attach max_bpc property, remove the
> redundant
> clamping of pipe bpp based on connector info
> V7: Fix Checkpatch warnings
> V9: Cleanup connected_sink_max_bpp and fix initial value in DP(Ville)
> V12: Fix debug message(Ville)
>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Cc: Kishore Kadiyala <kishore.kadiyala at intel.com>
> Cc: Manasi Navare <manasi.d.navare at intel.com>
> Cc: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 48 +++++++++++++++++++++-----
> ----------
> drivers/gpu/drm/i915/intel_dp.c | 4 +++
> drivers/gpu/drm/i915/intel_hdmi.c | 5 ++++
> 3 files changed, 37 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index a145efba9157..a597c4410f5d 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10869,30 +10869,38 @@ static void
> intel_modeset_update_connector_atomic_state(struct drm_device *dev)
> drm_connector_list_iter_end(&conn_iter);
> }
>
> -static void
> -connected_sink_compute_bpp(struct intel_connector *connector,
> - struct intel_crtc_state *pipe_config)
> +static int
> +connected_sink_max_bpp(const struct drm_connector_state *conn_state,
> + struct intel_crtc_state *pipe_config)
> {
> - const struct drm_display_info *info = &connector-
> >base.display_info;
> - int bpp = pipe_config->pipe_bpp;
> + int bpp;
> + struct drm_display_info *info = &conn_state->connector-
> >display_info;
>
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp
> constrains\n",
> - connector->base.base.id,
> - connector->base.name);
> + bpp = min(pipe_config->pipe_bpp, conn_state->max_bpc * 3);
>
> - /* Don't use an invalid EDID bpc value */
> - if (info->bpc != 0 && info->bpc * 3 < bpp) {
> - DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID
> reported max of %d\n",
> - bpp, info->bpc * 3);
> - pipe_config->pipe_bpp = info->bpc * 3;
> + switch (conn_state->max_bpc) {
> + case 6 ... 7:
> + pipe_config->pipe_bpp = 6 * 3;
> + case 8 ... 9:
> + pipe_config->pipe_bpp = 8 * 3;
> + break;
> + case 10 ... 11:
> + pipe_config->pipe_bpp = 10 * 3;
> + break;
> + case 12:
> + pipe_config->pipe_bpp = 12 * 3;
> + break;
> + default:
> + return -EINVAL;
> }
Why do we need this assignment here? I mean you have already determined
the minimum value which is stored in bpp, which should be used and then
check again, that it is not equal and only then use it.
Could it be just as simple as this(or I simply misunderstand something
here):
switch (conn_state->max_bpc) {
case 6 ... 7:
bpp = 6 * 3;
...
default:
return -EINVAL;
}
so here we set bpp(instead of pipe_bpp) to correct value or return
EINVAL.
And then we simply assign pipe_bpp to minimum of those and return:
pipe_bpp = min(pipe_config->pipe_bpp, bpp);
return 0;
Also that way get bpp values also check to correspond to the ranges
given in cases labels, while initial expression
min(pipe_config->pipe_bpp, conn_state->max_bpc * 3) could possibly give
7 * 3 but not 6 * 3(as specified in "case 6 .. 7") for
conn_state->max_bpc = 7.
So then there is no need in next additional assignment and check:
>
> - /* Clamp bpp to 8 on screens without EDID 1.4 */
> - if (info->bpc == 0 && bpp > 24) {
> - DRM_DEBUG_KMS("clamping display bpp (was %d) to
> default limit of 24\n",
> - bpp);
> - pipe_config->pipe_bpp = 24;
> + if (bpp != pipe_config->pipe_bpp) {
> + DRM_DEBUG_KMS("Limiting display bpp to %d instead of
> Edid bpp "
> + "%d, requested bpp %d\n", bpp, 3 *
> info->bpc,
> + 3 * conn_state->max_requested_bpc);
> + pipe_config->pipe_bpp = bpp;
> }
> + return 0;
> }
>
> static int
> @@ -10923,8 +10931,8 @@ compute_baseline_pipe_bpp(struct intel_crtc
> *crtc,
> if (connector_state->crtc != &crtc->base)
> continue;
>
> - connected_sink_compute_bpp(to_intel_connector(connec
> tor),
> - pipe_config);
> + if (connected_sink_max_bpp(connector_state,
> pipe_config) < 0)
> + return -EINVAL;
> }
>
> return bpp;
> diff --git a/drivers/gpu/drm/i915/intel_dp.c
> b/drivers/gpu/drm/i915/intel_dp.c
> index 0855b9785f7b..863c8832fe8b 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -5705,6 +5705,10 @@ intel_dp_add_properties(struct intel_dp
> *intel_dp, struct drm_connector *connect
> intel_attach_force_audio_property(connector);
>
> intel_attach_broadcast_rgb_property(connector);
> + if (HAS_GMCH_DISPLAY(dev_priv))
> + drm_connector_attach_max_bpc_property(connector, 6,
> 10);
> + else if (INTEL_GEN(dev_priv) >= 5)
> + drm_connector_attach_max_bpc_property(connector, 6,
> 12);
>
> if (intel_dp_is_edp(intel_dp)) {
> u32 allowed_scalers;
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
> b/drivers/gpu/drm/i915/intel_hdmi.c
> index 2c53efc463e6..3158ab085a30 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -2103,11 +2103,16 @@ static const struct drm_encoder_funcs
> intel_hdmi_enc_funcs = {
> static void
> intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct
> drm_connector *connector)
> {
> + struct drm_i915_private *dev_priv = to_i915(connector->dev);
> +
> intel_attach_force_audio_property(connector);
> intel_attach_broadcast_rgb_property(connector);
> intel_attach_aspect_ratio_property(connector);
> drm_connector_attach_content_type_property(connector);
> connector->state->picture_aspect_ratio =
> HDMI_PICTURE_ASPECT_NONE;
> +
> + if (!HAS_GMCH_DISPLAY(dev_priv))
> + drm_connector_attach_max_bpc_property(connector, 8,
> 12);
> }
>
> /*
--
Best Regards,
Lisovskiy Stanislav
More information about the Intel-gfx
mailing list