[Intel-gfx] [PATCH 1/6] drm/i915: don't apply Display WAs 1125 and 1126 to GLK/CNL+
Paulo Zanoni
paulo.r.zanoni at intel.com
Thu Oct 11 17:22:09 UTC 2018
Em Ter, 2018-10-09 às 16:55 -0700, Matt Roper escreveu:
> On Thu, Oct 04, 2018 at 04:15:55PM -0700, Paulo Zanoni wrote:
> > BSpec does not show these WAs as applicable to GLK, and for CNL it
> > only shows them applicable for a super early pre-production
> > stepping
> > we shouldn't be caring about anymore. Remove these so we can avoid
> > them on ICL too.
> >
> > Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
>
> From a quick grep, it looks like there's a couple other CNL A0-
> specific
> workarounds in the codebase (in the watermark code). If we don't
> want
> to handle CNL A0 in this patch, then I think we should first land a
> patch that removes the others and updates
> intel_detect_preproduction_hw() to make it explicit that this is no
> longer a supported stepping.
This patch (and series) is potentially a "bug fix" due to changes in
real-world not-A0 hardware (although I didn't mark this one as a fix
since I doubt it will close anything in Bugzilla). The patch to remove
the implementation of WAs in CNL:A0 is not a bug fix, but a rework.
Fixes should always come before the reworks in order to facilitate
backporting efforts.
I do intend to propose patches removing the CNL A0 watermarks code
(along with other reworks I have in mind), but I wanted to sort the
bugs first.
>
> > ---
> > drivers/gpu/drm/i915/intel_pm.c | 43 ++++++++++++++++++++++-------
> > ------------
> > 1 file changed, 23 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_pm.c
> > b/drivers/gpu/drm/i915/intel_pm.c
> > index 1392aa56a55a..910551e04d16 100644
> > --- a/drivers/gpu/drm/i915/intel_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > @@ -4687,28 +4687,31 @@ static int skl_compute_plane_wm(const
> > struct drm_i915_private *dev_priv,
> > res_lines = div_round_up_fixed16(selected_result,
> > wp-
> > >plane_blocks_per_line);
> >
> > - /* Display WA #1125: skl,bxt,kbl,glk */
> > - if (level == 0 && wp->rc_surface)
> > - res_blocks += fixed16_to_u32_round_up(wp-
> > >y_tile_minimum);
> > + if (IS_GEN9(dev_priv) && !IS_GEMINILAKE(dev_priv)) {
> > + /* Display WA #1125: skl,bxt,kbl */
>
> Although the code is right, should we just write "gen9" (or
> gen9display)
> in this comment (and the one for 1126)? That's how the bspec lists
> it
> (GEN9:All), and removes the ambiguity of whether "kbl" in this
> context
> is also supposed to cover CFL, AML, WHL (which it does).
Although that makes sense, it doesn't seem to follow the current
(undocumented?) standard we have for display WAs. I can totally do
this, but I would like some more opinions first. CC'ing the
maintainers.
Thanks for the reviews,
Paulo
>
>
> Matt
>
> > + if (level == 0 && wp->rc_surface)
> > + res_blocks +=
> > + fixed16_to_u32_round_up(wp-
> > >y_tile_minimum);
> > +
> > + /* Display WA #1126: skl,bxt,kbl */
> > + if (level >= 1 && level <= 7) {
> > + if (wp->y_tiled) {
> > + res_blocks +=
> > + fixed16_to_u32_round_up(wp-
> > >y_tile_minimum);
> > + res_lines += wp->y_min_scanlines;
> > + } else {
> > + res_blocks++;
> > + }
> >
> > - /* Display WA #1126: skl,bxt,kbl,glk */
> > - if (level >= 1 && level <= 7) {
> > - if (wp->y_tiled) {
> > - res_blocks += fixed16_to_u32_round_up(
> > - wp-
> > >y_tile_minimum);
> > - res_lines += wp->y_min_scanlines;
> > - } else {
> > - res_blocks++;
> > + /*
> > + * Make sure result blocks for higher
> > latency levels are
> > + * atleast as high as level below the
> > current level.
> > + * Assumption in DDB algorithm
> > optimization for special
> > + * cases. Also covers Display WA #1125 for
> > RC.
> > + */
> > + if (result_prev->plane_res_b > res_blocks)
> > + res_blocks = result_prev-
> > >plane_res_b;
> > }
> > -
> > - /*
> > - * Make sure result blocks for higher latency
> > levels are atleast
> > - * as high as level below the current level.
> > - * Assumption in DDB algorithm optimization for
> > special cases.
> > - * Also covers Display WA #1125 for RC.
> > - */
> > - if (result_prev->plane_res_b > res_blocks)
> > - res_blocks = result_prev->plane_res_b;
> > }
> >
> > if (INTEL_GEN(dev_priv) >= 11) {
> > --
> > 2.14.4
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>
More information about the Intel-gfx
mailing list