[Intel-gfx] [PATCH v2] drm/i915/icl: apply Display WA #1178 to fix type C dongles

[Rodrigo Vivi]

On Fri, Oct 12, 2018 at 02:57:58PM -0700, Lucas De Marchi wrote:
> Display WA #1178 is meant to fix Aux channel voltage swing too low with
> some type C dongles. It applies to external ports on combo phy. On
> Icelake this is port A and B when those are not eDP.
> 
> v2: follow the spec to the letter: include Aux A and just check if it's
>     not eDP instead of checking only for Aux B.
> 
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Imre Deak <imre.deak at intel.com>
> Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>

Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>

> ---
>  drivers/gpu/drm/i915/i915_reg.h         | 9 +++++++++
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 9 +++++++++
>  2 files changed, 18 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 20785417953d..e74c3f082ee9 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -8934,6 +8934,15 @@ enum skl_power_gate {
>  #define   CNL_AUX_ANAOVRD1_ENABLE	(1 << 16)
>  #define   CNL_AUX_ANAOVRD1_LDO_BYPASS	(1 << 23)
>  
> +#define _ICL_AUX_REG_IDX(pw_idx)	((pw_idx) - ICL_PW_CTL_IDX_AUX_A)
> +#define _ICL_AUX_ANAOVRD1_A		0x162398
> +#define _ICL_AUX_ANAOVRD1_B		0x6C398
> +#define ICL_AUX_ANAOVRD1(pw_idx)	_MMIO(_PICK(_ICL_AUX_REG_IDX(pw_idx), \
> +						    _ICL_AUX_ANAOVRD1_A, \
> +						    _ICL_AUX_ANAOVRD1_B))
> +#define   ICL_AUX_ANAOVRD1_LDO_BYPASS	(1 << 7)
> +#define   ICL_AUX_ANAOVRD1_ENABLE	(1 << 0)
> +
>  /* HDCP Key Registers */
>  #define HDCP_KEY_CONF			_MMIO(0x66c00)
>  #define  HDCP_AKSV_SEND_TRIGGER		BIT(31)
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 3cf8533e0834..31a49bdcf193 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -436,6 +436,15 @@ icl_combo_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
>  	I915_WRITE(ICL_PORT_CL_DW12(port), val | ICL_LANE_ENABLE_AUX);
>  
>  	hsw_wait_for_power_well_enable(dev_priv, power_well);
> +
> +	/* Display WA #1178: icl */
> +	if (IS_ICELAKE(dev_priv) &&
> +	    pw_idx >= ICL_PW_CTL_IDX_AUX_A && pw_idx <= ICL_PW_CTL_IDX_AUX_B &&
> +	    !intel_bios_is_port_edp(dev_priv, port)) {
> +		val = I915_READ(ICL_AUX_ANAOVRD1(pw_idx));
> +		val |= ICL_AUX_ANAOVRD1_ENABLE | ICL_AUX_ANAOVRD1_LDO_BYPASS;
> +		I915_WRITE(ICL_AUX_ANAOVRD1(pw_idx), val);
> +	}
>  }
>  
>  static void
> -- 
> 2.19.1.1.g8c3cf03f71
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx