[Intel-gfx] [PATCH v7 10/23] drm/i915/icl: Define TRANS_DSI_FUNC_CONF register
Jani Nikula
jani.nikula at intel.com
Mon Oct 15 14:27:58 UTC 2018
From: Madhav Chauhan <madhav.chauhan at intel.com>
This patch defines transcoder function configuration
registers and its bitfields for both DSI ports.
Used while programming/enabling DSI transcoder.
v2: Changes (Jani N)
- Define _SHIFT and _MASK for bitfields
- Define values for fields already shifted in place
v3 by Jani:
- Fix _SHIFT fields copy-pasted from _MASK
- Indentation fixes
- Reduce S3D orientation to single macro
- Wrap a macro parameter in parens
Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 45 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 436ff68b6b18..b065e4ca0b45 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -10379,6 +10379,51 @@ enum skl_power_gate {
#define TA_GET_MASK (0xf << 0)
#define TA_GET_SHIFT 0
+/* DSI transcoder configuration */
+#define _DSI_TRANS_FUNC_CONF_0 0x6b030
+#define _DSI_TRANS_FUNC_CONF_1 0x6b830
+#define DSI_TRANS_FUNC_CONF(tc) _MMIO_DSI(tc, \
+ _DSI_TRANS_FUNC_CONF_0,\
+ _DSI_TRANS_FUNC_CONF_1)
+#define OP_MODE_MASK (0x3 << 28)
+#define OP_MODE_SHIFT 28
+#define CMD_MODE_NO_GATE (0x0 << 28)
+#define CMD_MODE_TE_GATE (0x1 << 28)
+#define VIDEO_MODE_SYNC_EVENT (0x2 << 28)
+#define VIDEO_MODE_SYNC_PULSE (0x3 << 28)
+#define LINK_READY (1 << 20)
+#define PIX_FMT_MASK (0x3 << 16)
+#define PIX_FMT_SHIFT 16
+#define PIX_FMT_RGB565 (0x0 << 16)
+#define PIX_FMT_RGB666_PACKED (0x1 << 16)
+#define PIX_FMT_RGB666_LOOSE (0x2 << 16)
+#define PIX_FMT_RGB888 (0x3 << 16)
+#define PIX_FMT_RGB101010 (0x4 << 16)
+#define PIX_FMT_RGB121212 (0x5 << 16)
+#define PIX_FMT_COMPRESSED (0x6 << 16)
+#define BGR_TRANSMISSION (1 << 15)
+#define PIX_VIRT_CHAN(x) ((x) << 12)
+#define PIX_VIRT_CHAN_MASK (0x3 << 12)
+#define PIX_VIRT_CHAN_SHIFT 12
+#define PIX_BUF_THRESHOLD_MASK (0x3 << 10)
+#define PIX_BUF_THRESHOLD_SHIFT 10
+#define PIX_BUF_THRESHOLD_1_4 (0x0 << 10)
+#define PIX_BUF_THRESHOLD_1_2 (0x1 << 10)
+#define PIX_BUF_THRESHOLD_3_4 (0x2 << 10)
+#define PIX_BUF_THRESHOLD_FULL (0x3 << 10)
+#define CONTINUOUS_CLK_MASK (0x3 << 8)
+#define CONTINUOUS_CLK_SHIFT 8
+#define CLK_ENTER_LP_AFTER_DATA (0x0 << 8)
+#define CLK_HS_OR_LP (0x2 << 8)
+#define CLK_HS_CONTINUOUS (0x3 << 8)
+#define LINK_CALIBRATION_MASK (0x3 << 4)
+#define LINK_CALIBRATION_SHIFT 4
+#define CALIBRATION_DISABLED (0x0 << 4)
+#define CALIBRATION_ENABLED_INITIAL_ONLY (0x2 << 4)
+#define CALIBRATION_ENABLED_INITIAL_PERIODIC (0x3 << 4)
+#define S3D_ORIENTATION_LANDSCAPE (1 << 1)
+#define EOTP_DISABLED (1 << 0)
+
/* bits 31:0 */
#define _MIPIA_DBI_BW_CTRL (dev_priv->mipi_mmio_base + 0xb084)
#define _MIPIC_DBI_BW_CTRL (dev_priv->mipi_mmio_base + 0xb884)
--
2.11.0
More information about the Intel-gfx
mailing list