[Intel-gfx] [PATCH v7 02/23] drm/i915/dsi: refactor bitrate calculations in intel_dsi_vbt_init()
Jani Nikula
jani.nikula at intel.com
Tue Oct 16 12:44:06 UTC 2018
On Tue, 16 Oct 2018, Madhav Chauhan <madhav.chauhan at intel.com> wrote:
> On 10/15/2018 7:57 PM, Jani Nikula wrote:
>> Abstract bitrate calculation to a newly resurrected intel_dsi.c file
>> that will contain common code for VLV and ICL DSI.
>>
>> No functional changes.
>>
>> Cc: Madhav Chauhan <madhav.chauhan at intel.com>
>> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
>> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>> ---
>> drivers/gpu/drm/i915/Makefile | 1 +
>> drivers/gpu/drm/i915/intel_dsi.c | 17 +++++++++++++++++
>> drivers/gpu/drm/i915/intel_dsi.h | 3 +++
>> drivers/gpu/drm/i915/intel_dsi_vbt.c | 28 ++++++++++------------------
>> 4 files changed, 31 insertions(+), 18 deletions(-)
>> create mode 100644 drivers/gpu/drm/i915/intel_dsi.c
>>
>> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
>> index 48cae0eae3f9..22cbf9c3bb0c 100644
>> --- a/drivers/gpu/drm/i915/Makefile
>> +++ b/drivers/gpu/drm/i915/Makefile
>> @@ -143,6 +143,7 @@ i915-y += dvo_ch7017.o \
>> intel_dp_link_training.o \
>> intel_dp_mst.o \
>> intel_dp.o \
>> + intel_dsi.o \
>> intel_dsi_dcs_backlight.o \
>> intel_dsi_vbt.o \
>> intel_dvo.o \
>> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
>> new file mode 100644
>> index 000000000000..4daa1da94047
>> --- /dev/null
>> +++ b/drivers/gpu/drm/i915/intel_dsi.c
>> @@ -0,0 +1,17 @@
>> +// SPDX-License-Identifier: MIT
>> +/*
>> + * Copyright © 2018 Intel Corporation
>> + */
>> +
>> +#include <drm/drm_mipi_dsi.h>
>> +#include "intel_dsi.h"
>> +
>> +int intel_dsi_bitrate(const struct intel_dsi *intel_dsi)
>> +{
>> + int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
>> +
>> + if (WARN_ON(bpp < 0))
>> + bpp = 16;
>
> Shouldn't we keep the default bpp to 24 here as in most of the cases bpp
> is 24 for DSI or why 16??
*shrug*
Not sure it matters all that much really. We set the pixel format in
intel_dsi_vbt.c, and if that gives us something bogus, not much of a
chance any of it will work. More than anything I just wanted to avoid a
negative return from this function.
BR,
Jani.
>
> Regards,
> Madhav
>
>> +
>> + return intel_dsi->pclk * bpp / intel_dsi->lane_count;
>> +}
>> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
>> index ad7c1cb32983..68f14d8f1e18 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi.h
>> +++ b/drivers/gpu/drm/i915/intel_dsi.h
>> @@ -129,6 +129,9 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder)
>> return container_of(encoder, struct intel_dsi, base.base);
>> }
>>
>> +/* intel_dsi.c */
>> +int intel_dsi_bitrate(const struct intel_dsi *intel_dsi);
>> +
>> /* vlv_dsi.c */
>> void vlv_dsi_wait_for_fifo_empty(struct intel_dsi *intel_dsi, enum port port);
>> enum mipi_dsi_pixel_format pixel_format_from_register_bits(u32 fmt);
>> diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> index ac83d6b89ae0..6c4cc92f5947 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> @@ -506,14 +506,12 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>> struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
>> struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps;
>> struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode;
>> - u32 bpp;
>> - u32 tlpx_ns, extra_byte_count, bitrate, tlpx_ui;
>> + u32 tlpx_ns, extra_byte_count, tlpx_ui;
>> u32 ui_num, ui_den;
>> u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
>> u32 ths_prepare_ns, tclk_trail_ns;
>> u32 tclk_prepare_clkzero, ths_prepare_hszero;
>> u32 lp_to_hs_switch, hs_to_lp_switch;
>> - u32 pclk, computed_ddr;
>> u32 mul;
>> u16 burst_mode_ratio;
>> enum port port;
>> @@ -526,7 +524,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>> intel_dsi->pixel_format =
>> pixel_format_from_register_bits(
>> mipi_config->videomode_color_format << 7);
>> - bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
>>
>> intel_dsi->dual_link = mipi_config->dual_link;
>> intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
>> @@ -541,19 +538,18 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>> intel_dsi->video_frmt_cfg_bits =
>> mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
>>
>> - pclk = mode->clock;
>> + /* Starting point, adjusted depending on dual link and burst mode */
>> + intel_dsi->pclk = mode->clock;
>>
>> /* In dual link mode each port needs half of pixel clock */
>> if (intel_dsi->dual_link) {
>> - pclk = pclk / 2;
>> + intel_dsi->pclk /= 2;
>>
>> /* we can enable pixel_overlap if needed by panel. In this
>> * case we need to increase the pixelclock for extra pixels
>> */
>> if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
>> - pclk += DIV_ROUND_UP(mode->vtotal *
>> - intel_dsi->pixel_overlap *
>> - 60, 1000);
>> + intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000);
>> }
>> }
>>
>> @@ -563,19 +559,18 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>> */
>> if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
>> if (mipi_config->target_burst_mode_freq) {
>> - computed_ddr = (pclk * bpp) / intel_dsi->lane_count;
>> + u32 bitrate = intel_dsi_bitrate(intel_dsi);
>>
>> - if (mipi_config->target_burst_mode_freq <
>> - computed_ddr) {
>> + if (mipi_config->target_burst_mode_freq < bitrate) {
>> DRM_ERROR("Burst mode freq is less than computed\n");
>> return false;
>> }
>>
>> burst_mode_ratio = DIV_ROUND_UP(
>> mipi_config->target_burst_mode_freq * 100,
>> - computed_ddr);
>> + bitrate);
>>
>> - pclk = DIV_ROUND_UP(pclk * burst_mode_ratio, 100);
>> + intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
>> } else {
>> DRM_ERROR("Burst mode target is not set\n");
>> return false;
>> @@ -584,9 +579,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>> burst_mode_ratio = 100;
>>
>> intel_dsi->burst_mode_ratio = burst_mode_ratio;
>> - intel_dsi->pclk = pclk;
>> -
>> - bitrate = (pclk * bpp) / intel_dsi->lane_count;
>>
>> switch (intel_dsi->escape_clk_div) {
>> case 0:
>> @@ -620,7 +612,7 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>>
>> /* in Kbps */
>> ui_num = NS_KHZ_RATIO;
>> - ui_den = bitrate;
>> + ui_den = intel_dsi_bitrate(intel_dsi);
>>
>> tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero;
>> ths_prepare_hszero = mipi_config->ths_prepare_hszero;
>
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list