[Intel-gfx] [PATCH v7 03/23] drm/i915/dsi: abstract dphy parameter init
Jani Nikula
jani.nikula at intel.com
Thu Oct 18 12:20:07 UTC 2018
On Tue, 16 Oct 2018, Madhav Chauhan <madhav.chauhan at intel.com> wrote:
> On 10/15/2018 7:57 PM, Jani Nikula wrote:
>> intel_dsi_vbt_init() has grown too unwieldy, and it's about to be
>> modified due to ICL DSI. Abstract out the VLV specific dphy param
>> init. No functional changes. Intentionally no stylistic changes during
>> code movement.
>>
>> Cc: Madhav Chauhan <madhav.chauhan at intel.com>
>> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
>> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>
> Looks ok to me,
> Reviewed-by: Madhav Chauhan <madhav.chauhan at intel.com>
Thanks for the review, pushed patches 1-3 with Ville's IRC ack on patch
1.
BR,
Jani.
>
> Regards,
> Madhav
>
>> ---
>> drivers/gpu/drm/i915/intel_dsi_vbt.c | 147 +++++++++++++++++++----------------
>> 1 file changed, 78 insertions(+), 69 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> index 6c4cc92f5947..fdeba8386d53 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> @@ -499,13 +499,11 @@ int intel_dsi_vbt_get_modes(struct intel_dsi *intel_dsi)
>> return 1;
>> }
>>
>> -bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>> +static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
>> {
>> struct drm_device *dev = intel_dsi->base.base.dev;
>> struct drm_i915_private *dev_priv = to_i915(dev);
>> struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
>> - struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps;
>> - struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode;
>> u32 tlpx_ns, extra_byte_count, tlpx_ui;
>> u32 ui_num, ui_den;
>> u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
>> @@ -513,72 +511,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>> u32 tclk_prepare_clkzero, ths_prepare_hszero;
>> u32 lp_to_hs_switch, hs_to_lp_switch;
>> u32 mul;
>> - u16 burst_mode_ratio;
>> - enum port port;
>> -
>> - DRM_DEBUG_KMS("\n");
>> -
>> - intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
>> - intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
>> - intel_dsi->lane_count = mipi_config->lane_cnt + 1;
>> - intel_dsi->pixel_format =
>> - pixel_format_from_register_bits(
>> - mipi_config->videomode_color_format << 7);
>> -
>> - intel_dsi->dual_link = mipi_config->dual_link;
>> - intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
>> - intel_dsi->operation_mode = mipi_config->is_cmd_mode;
>> - intel_dsi->video_mode_format = mipi_config->video_transfer_mode;
>> - intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
>> - intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
>> - intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout;
>> - intel_dsi->rst_timer_val = mipi_config->device_reset_timer;
>> - intel_dsi->init_count = mipi_config->master_init_timer;
>> - intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
>> - intel_dsi->video_frmt_cfg_bits =
>> - mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
>> -
>> - /* Starting point, adjusted depending on dual link and burst mode */
>> - intel_dsi->pclk = mode->clock;
>> -
>> - /* In dual link mode each port needs half of pixel clock */
>> - if (intel_dsi->dual_link) {
>> - intel_dsi->pclk /= 2;
>> -
>> - /* we can enable pixel_overlap if needed by panel. In this
>> - * case we need to increase the pixelclock for extra pixels
>> - */
>> - if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
>> - intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000);
>> - }
>> - }
>> -
>> - /* Burst Mode Ratio
>> - * Target ddr frequency from VBT / non burst ddr freq
>> - * multiply by 100 to preserve remainder
>> - */
>> - if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
>> - if (mipi_config->target_burst_mode_freq) {
>> - u32 bitrate = intel_dsi_bitrate(intel_dsi);
>> -
>> - if (mipi_config->target_burst_mode_freq < bitrate) {
>> - DRM_ERROR("Burst mode freq is less than computed\n");
>> - return false;
>> - }
>> -
>> - burst_mode_ratio = DIV_ROUND_UP(
>> - mipi_config->target_burst_mode_freq * 100,
>> - bitrate);
>> -
>> - intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
>> - } else {
>> - DRM_ERROR("Burst mode target is not set\n");
>> - return false;
>> - }
>> - } else
>> - burst_mode_ratio = 100;
>> -
>> - intel_dsi->burst_mode_ratio = burst_mode_ratio;
>>
>> switch (intel_dsi->escape_clk_div) {
>> case 0:
>> @@ -738,6 +670,83 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>> DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
>> 8);
>> intel_dsi->clk_hs_to_lp_count += extra_byte_count;
>> +}
>> +
>> +bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>> +{
>> + struct drm_device *dev = intel_dsi->base.base.dev;
>> + struct drm_i915_private *dev_priv = to_i915(dev);
>> + struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
>> + struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps;
>> + struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode;
>> + u16 burst_mode_ratio;
>> + enum port port;
>> +
>> + DRM_DEBUG_KMS("\n");
>> +
>> + intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
>> + intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
>> + intel_dsi->lane_count = mipi_config->lane_cnt + 1;
>> + intel_dsi->pixel_format =
>> + pixel_format_from_register_bits(
>> + mipi_config->videomode_color_format << 7);
>> +
>> + intel_dsi->dual_link = mipi_config->dual_link;
>> + intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
>> + intel_dsi->operation_mode = mipi_config->is_cmd_mode;
>> + intel_dsi->video_mode_format = mipi_config->video_transfer_mode;
>> + intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
>> + intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
>> + intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout;
>> + intel_dsi->rst_timer_val = mipi_config->device_reset_timer;
>> + intel_dsi->init_count = mipi_config->master_init_timer;
>> + intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
>> + intel_dsi->video_frmt_cfg_bits =
>> + mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
>> +
>> + /* Starting point, adjusted depending on dual link and burst mode */
>> + intel_dsi->pclk = mode->clock;
>> +
>> + /* In dual link mode each port needs half of pixel clock */
>> + if (intel_dsi->dual_link) {
>> + intel_dsi->pclk /= 2;
>> +
>> + /* we can enable pixel_overlap if needed by panel. In this
>> + * case we need to increase the pixelclock for extra pixels
>> + */
>> + if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
>> + intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000);
>> + }
>> + }
>> +
>> + /* Burst Mode Ratio
>> + * Target ddr frequency from VBT / non burst ddr freq
>> + * multiply by 100 to preserve remainder
>> + */
>> + if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
>> + if (mipi_config->target_burst_mode_freq) {
>> + u32 bitrate = intel_dsi_bitrate(intel_dsi);
>> +
>> + if (mipi_config->target_burst_mode_freq < bitrate) {
>> + DRM_ERROR("Burst mode freq is less than computed\n");
>> + return false;
>> + }
>> +
>> + burst_mode_ratio = DIV_ROUND_UP(
>> + mipi_config->target_burst_mode_freq * 100,
>> + bitrate);
>> +
>> + intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
>> + } else {
>> + DRM_ERROR("Burst mode target is not set\n");
>> + return false;
>> + }
>> + } else
>> + burst_mode_ratio = 100;
>> +
>> + intel_dsi->burst_mode_ratio = burst_mode_ratio;
>> +
>> + vlv_dphy_param_init(intel_dsi);
>>
>> DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk);
>> DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap);
>
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list