[Intel-gfx] [PATCH 1/3] drm/i915: Fix the VLV/CHV DSI panel orientation hw readout

[Jani Nikula]

On Fri, 19 Oct 2018, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Let's make sure the DSI port is actually on before we go
> poking at the plane register to determine which way
> it's rotated. Otherwise we could be looking at a plane
> that is feeding a HDMI port for instance.
>
> And in order to read the plane register we need the power
> well to be on. Make sure that is indeed the case. We'll
> also make sure the plane is actually enabled before we
> trust the rotation bit to tell us the truth.
>
> Cc: Hans de Goede <hdegoede at redhat.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/vlv_dsi.c | 53 ++++++++++++++++++++++++++--------
>  1 file changed, 41 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
> index dbca30460a6b..893839ea0ff9 100644
> --- a/drivers/gpu/drm/i915/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/vlv_dsi.c
> @@ -1668,27 +1668,56 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = {
>  	.atomic_duplicate_state = intel_digital_connector_duplicate_state,
>  };
>  
> -static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
> +static enum drm_panel_orientation
> +vlv_dsi_get_hw_panel_orientation(struct intel_connector *connector)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> -	int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> -	enum i9xx_plane_id i9xx_plane;
> +	struct intel_encoder *encoder = connector->encoder;
> +	enum intel_display_power_domain power_domain;
> +	enum drm_panel_orientation orientation;
> +	struct intel_plane *plane;
> +	struct intel_crtc *crtc;
> +	enum pipe pipe;
>  	u32 val;
>  
> -	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> -		if (connector->encoder->crtc_mask == BIT(PIPE_B))
> -			i9xx_plane = PLANE_B;
> -		else
> -			i9xx_plane = PLANE_A;
> +	if (!encoder->get_hw_state(encoder, &pipe))
> +		return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
>  
> -		val = I915_READ(DSPCNTR(i9xx_plane));
> -		if (val & DISPPLANE_ROTATE_180)
> -			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> -	}
> +	crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> +	plane = to_intel_plane(crtc->base.primary);
> +
> +	power_domain = POWER_DOMAIN_PIPE(pipe);
> +	if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
> +		return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +
> +	val = I915_READ(DSPCNTR(plane->i9xx_plane));
> +
> +	if (!(val & DISPLAY_PLANE_ENABLE))
> +		orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +	else if (val & DISPPLANE_ROTATE_180)
> +		orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> +	else
> +		orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> +
> +	intel_display_power_put(dev_priv, power_domain);
>  
>  	return orientation;
>  }
>  
> +static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> +	enum drm_panel_orientation orientation;
> +
> +	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> +		orientation = vlv_dsi_get_hw_panel_orientation(connector);
> +		if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +			return orientation;
> +	}
> +
> +	return DRM_MODE_PANEL_ORIENTATION_NORMAL;
> +}

Long term I think this should be shoved to intel_dsi.c, the resurrected
dumping ground for platform independent DSI code. But I'm fine with
landing it here first and moving later as the only user is still here.

BR,
Jani.

> +
>  static void intel_dsi_add_properties(struct intel_connector *connector)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);

-- 
Jani Nikula, Intel Open Source Graphics Center