[Intel-gfx] [PATCH 2/3] drm/i915: Determine DSI panel orientation from VBT

[Jani Nikula]

On Fri, 19 Oct 2018, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> VBT appears to have two (or possibly three) ways to indicate the panel
> rotation. The first is in the MIPI config block, but that apparenly
> usually (maybe always?) indicates 0 degrees despite the actual panel
> orientation. The second way to indicate this is in the general features
> block, which can just indicate whether 180 degress rotation is used.
> The third might be a separate rotation data block, but that is not
> at all documented so who knows what it may contain.
>
> Let's try the first two. We first try the DSI specicic VBT
> information, and it it doesn't look trustworthy (ie. indicates
> 0 degrees) we fall back to the 180 degree thing. Just to avoid too
> many changes in one go we shall also keep the hardware readout path
> for now.
>
> If this works for more than just my VLV FFRD the question becomes
> how many of the panel orientation quirks are now redundant?
>
> Cc: Hans de Goede <hdegoede at redhat.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/i915_drv.h   |  2 ++
>  drivers/gpu/drm/i915/intel_bios.c | 31 +++++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/vlv_dsi.c    | 11 ++++++++++-
>  3 files changed, 43 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 3017ef037fed..115d5963e5a6 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1102,6 +1102,7 @@ struct intel_vbt_data {
>  	unsigned int panel_type:4;
>  	int lvds_ssc_freq;
>  	unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
> +	enum drm_panel_orientation orientation;
>  
>  	enum drrs_support_type drrs_type;
>  
> @@ -1147,6 +1148,7 @@ struct intel_vbt_data {
>  		u8 *data;
>  		const u8 *sequence[MIPI_SEQ_MAX];
>  		u8 *deassert_seq; /* Used by fixup_mipi_sequences() */
> +		enum drm_panel_orientation orientation;

Would be nice to expose just one orientation field, but I guess we need
the duplication... *sigh*

>  	} dsi;
>  
>  	int crt_ddc_pin;
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index 1faa494e2bc9..a4bfd92212df 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -420,6 +420,13 @@ parse_general_features(struct drm_i915_private *dev_priv,
>  		intel_bios_ssc_frequency(dev_priv, general->ssc_freq);
>  	dev_priv->vbt.display_clock_mode = general->display_clock_mode;
>  	dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted;
> +	if (bdb->version >= 181) {
> +		dev_priv->vbt.orientation = general->rotate_180 ?
> +			DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP :
> +			DRM_MODE_PANEL_ORIENTATION_NORMAL;
> +	} else {
> +		dev_priv->vbt.orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +	}
>  	DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n",
>  		      dev_priv->vbt.int_tv_support,
>  		      dev_priv->vbt.int_crt_support,
> @@ -852,6 +859,30 @@ parse_mipi_config(struct drm_i915_private *dev_priv,
>  
>  	parse_dsi_backlight_ports(dev_priv, bdb->version, port);
>  
> +	/* FIXME is the 90 vs. 270 correct? */

*sigh* Your guess is as good as mine.

> +	switch (config->rotation) {
> +	case ENABLE_ROTATION_0:
> +		/*
> +		 * Most (all?) VBTs claim 0 degrees despite having
> +		 * an upside down panel, thus we do not trust this.
> +		 */
> +		dev_priv->vbt.dsi.orientation =
> +			DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +		break;
> +	case ENABLE_ROTATION_90:
> +		dev_priv->vbt.dsi.orientation =
> +			DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
> +		break;
> +	case ENABLE_ROTATION_180:
> +		dev_priv->vbt.dsi.orientation =
> +			DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> +		break;
> +	case ENABLE_ROTATION_270:
> +		dev_priv->vbt.dsi.orientation =
> +			DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
> +		break;
> +	}
> +
>  	/* We have mandatory mipi config blocks. Initialize as generic panel */
>  	dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
>  }
> diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
> index 893839ea0ff9..a3119ec3189a 100644
> --- a/drivers/gpu/drm/i915/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/vlv_dsi.c
> @@ -1704,7 +1704,8 @@ vlv_dsi_get_hw_panel_orientation(struct intel_connector *connector)
>  	return orientation;
>  }
>  
> -static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
> +static enum drm_panel_orientation
> +intel_dsi_get_panel_orientation(struct intel_connector *connector)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
>  	enum drm_panel_orientation orientation;
> @@ -1715,6 +1716,14 @@ static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
>  			return orientation;
>  	}
>  
> +	orientation = dev_priv->vbt.dsi.orientation;
> +	if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +		return orientation;
> +
> +	orientation = dev_priv->vbt.orientation;
> +	if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +		return orientation;

I take it you wrote patch 3/3 separately to perhaps apply it much later?
Otherwise the series could be simplified. So in the mean time with just
the first two applied, would it make sense to debug log if there's a
discrepancy between what we read out and what the VBT says?

Either way,

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

> +
>  	return DRM_MODE_PANEL_ORIENTATION_NORMAL;
>  }

-- 
Jani Nikula, Intel Open Source Graphics Center