[Intel-gfx] [PATCH v2 1/3] drm/i915: Fix the VLV/CHV DSI panel orientation hw readout

Hans de Goede hdegoede at redhat.com
Mon Oct 22 19:41:36 UTC 2018


Hi,

On 22-10-18 16:19, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> Let's make sure the DSI port is actually on before we go
> poking at the plane register to determine which way
> it's rotated. Otherwise we could be looking at a plane
> that is feeding a HDMI port for instance.
> 
> And in order to read the plane register we need the power
> well to be on. Make sure that is indeed the case. We'll
> also make sure the plane is actually enabled before we
> trust the rotation bit to tell us the truth.
> 
> v2: s/intel_dsi/vlv_dsi/
> 
> Cc: Hans de Goede <hdegoede at redhat.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Ok, this series correctly detects the panel being upside-down
on the BYT tablet with an upside down panel which I have, so
this series is:

Tested-by: Hans de Goede <hdegoede at redhat.com>

I assume that most tablets like this one will have the general->rotate_180
bit set so that the firmware setup / EFI console will show up the right way
up. So I think going ahead with this is fine.

Regards,

Hans




> ---
>   drivers/gpu/drm/i915/vlv_dsi.c | 56 ++++++++++++++++++++++++++--------
>   1 file changed, 43 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
> index ee0cd5d0bf91..dcc59f653e5b 100644
> --- a/drivers/gpu/drm/i915/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/vlv_dsi.c
> @@ -1647,27 +1647,57 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = {
>   	.atomic_duplicate_state = intel_digital_connector_duplicate_state,
>   };
>   
> -static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
> +static enum drm_panel_orientation
> +vlv_dsi_get_hw_panel_orientation(struct intel_connector *connector)
>   {
>   	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> -	int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> -	enum i9xx_plane_id i9xx_plane;
> +	struct intel_encoder *encoder = connector->encoder;
> +	enum intel_display_power_domain power_domain;
> +	enum drm_panel_orientation orientation;
> +	struct intel_plane *plane;
> +	struct intel_crtc *crtc;
> +	enum pipe pipe;
>   	u32 val;
>   
> -	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> -		if (connector->encoder->crtc_mask == BIT(PIPE_B))
> -			i9xx_plane = PLANE_B;
> -		else
> -			i9xx_plane = PLANE_A;
> +	if (!encoder->get_hw_state(encoder, &pipe))
> +		return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
>   
> -		val = I915_READ(DSPCNTR(i9xx_plane));
> -		if (val & DISPPLANE_ROTATE_180)
> -			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> -	}
> +	crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> +	plane = to_intel_plane(crtc->base.primary);
> +
> +	power_domain = POWER_DOMAIN_PIPE(pipe);
> +	if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
> +		return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +
> +	val = I915_READ(DSPCNTR(plane->i9xx_plane));
> +
> +	if (!(val & DISPLAY_PLANE_ENABLE))
> +		orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +	else if (val & DISPPLANE_ROTATE_180)
> +		orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> +	else
> +		orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> +
> +	intel_display_power_put(dev_priv, power_domain);
>   
>   	return orientation;
>   }
>   
> +static enum drm_panel_orientation
> +vlv_dsi_get_panel_orientation(struct intel_connector *connector)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> +	enum drm_panel_orientation orientation;
> +
> +	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> +		orientation = vlv_dsi_get_hw_panel_orientation(connector);
> +		if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +			return orientation;
> +	}
> +
> +	return DRM_MODE_PANEL_ORIENTATION_NORMAL;
> +}
> +
>   static void intel_dsi_add_properties(struct intel_connector *connector)
>   {
>   	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> @@ -1685,7 +1715,7 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
>   		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>   
>   		connector->base.display_info.panel_orientation =
> -			intel_dsi_get_panel_orientation(connector);
> +			vlv_dsi_get_panel_orientation(connector);
>   		drm_connector_init_panel_orientation_property(
>   				&connector->base,
>   				connector->panel.fixed_mode->hdisplay,
> 


More information about the Intel-gfx mailing list