[Intel-gfx] [PATCH v2 4/4] drm/nouveau: Use atomic VCPI helpers for MST

[Lyude Paul]

Currently, nouveau uses the yolo method of setting up MST displays: it
uses the old VCPI helpers (drm_dp_find_vcpi_slots()) for computing the
display configuration. These helpers don't take care to make sure they
take a reference to the mstb port that they're checking, and
additionally don't actually check whether or not the topology still has
enough bandwidth to provide the VCPI tokens required.

So, drop usage of the old helpers and move entirely over to the atomic
helpers.

Signed-off-by: Lyude Paul <lyude at redhat.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/nouveau/dispnv50/disp.c | 54 +++++++++++++++++++++----
 1 file changed, 47 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c
index 6cbbae3f438b..37503319e5b1 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
@@ -747,16 +747,22 @@ nv50_msto_atomic_check(struct drm_encoder *encoder,
 		       struct drm_crtc_state *crtc_state,
 		       struct drm_connector_state *conn_state)
 {
-	struct nv50_mstc *mstc = nv50_mstc(conn_state->connector);
+	struct drm_atomic_state *state = crtc_state->state;
+	struct drm_connector *connector = conn_state->connector;
+	struct nv50_mstc *mstc = nv50_mstc(connector);
 	struct nv50_mstm *mstm = mstc->mstm;
-	int bpp = conn_state->connector->display_info.bpc * 3;
+	int bpp = connector->display_info.bpc * 3;
 	int slots;
 
-	mstc->pbn = drm_dp_calc_pbn_mode(crtc_state->adjusted_mode.clock, bpp);
-
-	slots = drm_dp_find_vcpi_slots(&mstm->mgr, mstc->pbn);
-	if (slots < 0)
-		return slots;
+	mstc->pbn = drm_dp_calc_pbn_mode(crtc_state->adjusted_mode.clock,
+					 bpp);
+	/* Zombies don't need VCPI */
+	if (!drm_connector_is_unregistered(connector)) {
+		slots = drm_dp_atomic_find_vcpi_slots(state, &mstm->mgr,
+						      mstc->port, mstc->pbn);
+		if (slots < 0)
+			return slots;
+	}
 
 	return nv50_outp_atomic_check_view(encoder, crtc_state, conn_state,
 					   mstc->native);
@@ -920,12 +926,38 @@ nv50_mstc_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
+static int
+nv50_mstc_atomic_check(struct drm_connector *connector,
+		       struct drm_connector_state *new_conn_state)
+{
+	struct drm_atomic_state *state = new_conn_state->state;
+	struct nv50_mstc *mstc = nv50_mstc(connector);
+	struct drm_dp_mst_topology_mgr *mgr = &mstc->mstm->mgr;
+	struct drm_connector_state *old_conn_state;
+	struct drm_crtc *old_crtc;
+
+	old_conn_state = drm_atomic_get_old_connector_state(state, connector);
+	old_crtc = old_conn_state->crtc;
+
+	/* We only need to release VCPI here if we're going from having a CRTC
+	 * on this connector, to not having one
+	 */
+	if (!old_crtc || new_conn_state->crtc)
+		return 0;
+
+	/* Release the previous VCPI allocation since the encoder's
+	 * atomic_check() won't be called
+	 */
+	return drm_dp_atomic_release_vcpi_slots(state, mgr, mstc->port);
+}
+
 static const struct drm_connector_helper_funcs
 nv50_mstc_help = {
 	.get_modes = nv50_mstc_get_modes,
 	.mode_valid = nv50_mstc_mode_valid,
 	.best_encoder = nv50_mstc_best_encoder,
 	.atomic_best_encoder = nv50_mstc_atomic_best_encoder,
+	.atomic_check = nv50_mstc_atomic_check,
 };
 
 static enum drm_connector_status
@@ -2084,6 +2116,8 @@ nv50_disp_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
 	struct drm_connector *connector;
 	struct drm_crtc_state *new_crtc_state;
 	struct drm_crtc *crtc;
+	struct drm_dp_mst_topology_mgr *mgr;
+	struct drm_dp_mst_topology_state *mst_state;
 	int ret, i;
 
 	/* We need to handle colour management on a per-plane basis. */
@@ -2109,6 +2143,12 @@ nv50_disp_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
 			return ret;
 	}
 
+	for_each_new_mst_mgr_in_state(state, mgr, mst_state, i) {
+		ret = drm_dp_mst_atomic_check(mst_state);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
-- 
2.17.2