[Intel-gfx] [PATCH v3 09/10] drm/i915: Keep PSR disabled after a driver reload after a PSR error

[Ville Syrjälä]

On Fri, Oct 26, 2018 at 07:34:42PM +0000, Souza, Jose wrote:
> On Fri, 2018-10-26 at 21:01 +0300, Ville Syrjälä wrote:
> > On Fri, Oct 26, 2018 at 05:53:47PM +0000, Souza, Jose wrote:
> > > On Thu, 2018-10-25 at 18:17 -0700, José Roberto de Souza wrote:
> > > > If a PSR error happened and the driver is reloaded, the
> > > > EDP_PSR_IIR
> > > > will still keep the error set even after the reset done in the
> > > > irq_preinstall and irq_uninstall hooks.
> > > > And enabling in this situation cause the screen to freeze in the
> > > > first time that PSR HW tries to activate so lets keep PSR
> > > > disabled
> > > > to avoid any rendering problems.
> > > > 
> > > > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > > > Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> > > > ---
> > > >  drivers/gpu/drm/i915/intel_psr.c | 13 +++++++++++++
> > > >  1 file changed, 13 insertions(+)
> > > > 
> > > > diff --git a/drivers/gpu/drm/i915/intel_psr.c
> > > > b/drivers/gpu/drm/i915/intel_psr.c
> > > > index 68201cc24d25..718270da1061 100644
> > > > --- a/drivers/gpu/drm/i915/intel_psr.c
> > > > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > > > @@ -529,6 +529,19 @@ void intel_psr_compute_config(struct
> > > > intel_dp
> > > > *intel_dp,
> > > >  		return;
> > > >  	}
> > > >  
> > > > +	/*
> > > > +	 * If a PSR error happened and the driver is reloaded, the
> > > > EDP_PSR_IIR
> > > > +	 * will still keep the error set even after the reset done in
> > > > the
> > > > +	 * irq_preinstall and irq_uninstall hooks.
> > > > +	 * And enabling in this situation cause the screen to freeze in
> > > > the
> > > > +	 * first time that PSR HW tries to activate so lets keep PSR
> > > > disabled
> > > > +	 * to avoid any rendering problems.
> > > > +	 */
> > > > +	if (I915_READ(EDP_PSR_IIR) & EDP_PSR_ERROR(TRANSCODER_EDP)) {
> > > > +		DRM_DEBUG_KMS("PSR interruption error set\n");
> > > > +		return;
> > > > +	}
> > > > +
> > > >  	if (IS_HASWELL(dev_priv) &&
> > > >  	    I915_READ(HSW_STEREO_3D_CTL(crtc_state->cpu_transcoder)) &
> > > >  		      S3D_ENABLE) {
> > > 
> > > diff --git a/drivers/gpu/drm/i915/intel_psr.c
> > > b/drivers/gpu/drm/i915/intel_psr.c
> > > index 68201cc24d25..47af87f45e03 100644
> > > --- a/drivers/gpu/drm/i915/intel_psr.c
> > > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > > @@ -529,6 +529,22 @@ void intel_psr_compute_config(struct intel_dp
> > > *intel_dp,
> > >                 return;
> > >         }
> > > 
> > > +       /*
> > > +        * If a PSR error happened and the driver is reloaded, the
> > > EDP_PSR_IIR
> > > +        * will still keep the error set even after the reset done
> > > in
> > > the
> > > +        * irq_preinstall and irq_uninstall hooks.
> > > +        * And enabling in this situation cause the screen to
> > > freeze in
> > > the
> > > +        * first time that PSR HW tries to activate so lets keep
> > > PSR
> > > disabled
> > > +        * to avoid any rendering problems.
> > > +        */
> > > +       intel_runtime_pm_get(dev_priv);
> > > +       if (I915_READ(EDP_PSR_IIR) & EDP_PSR_ERROR(TRANSCODER_EDP))
> > > {
> > > +               intel_runtime_pm_put(dev_priv);
> > > +               DRM_DEBUG_KMS("PSR interruption error set\n");
> > > +               return;
> > > +       }
> > > +       intel_runtime_pm_put(dev_priv);
> > 
> > No hardware access in compute_config()
> 
> Oh did not know that, I will fix that.
> Thanks
> 
> > 
> > > +
> > >         if (IS_HASWELL(dev_priv) &&
> > >             I915_READ(HSW_STEREO_3D_CTL(crtc_state-
> > > >cpu_transcoder)) &
> > >                       S3D_ENABLE) {
> > 
> > ^
> > This is nonsense. Don't follow the bad example. Also pls send a patch
> > to
> > kill this thing ;)
> 
> Sure, I can't find any place setting HSW_STEREO_3D_CTL so I will just
> remove it.
> I guess we don't support stereo 3D at all.

Not this form of it.

-- 
Ville Syrjälä
Intel