[Intel-gfx] [PATCH v8 24/38] drm/i915/icl: Get HW state for DSI encoder

Jani Nikula jani.nikula at intel.com
Tue Oct 30 11:56:30 UTC 2018


From: Madhav Chauhan <madhav.chauhan at intel.com>

This patch read out the current hw state for DSI and
return true if encoder is active.

v2 by Jani:
 - Squash connector get hw state hook here
 - Squash encode get hw state fix here

Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/icl_dsi.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
index 83612c444eab..0c1f84cca16e 100644
--- a/drivers/gpu/drm/i915/icl_dsi.c
+++ b/drivers/gpu/drm/i915/icl_dsi.c
@@ -1067,6 +1067,46 @@ static void gen11_dsi_get_config(struct intel_encoder *encoder,
 	pipe_config->port_clock = pixel_clk;
 }
 
+static bool gen11_dsi_get_hw_state(struct intel_encoder *encoder,
+				   enum pipe *pipe)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	u32 tmp;
+	enum port port;
+	enum transcoder dsi_trans;
+	bool ret = false;
+
+	if (!intel_display_power_get_if_enabled(dev_priv,
+						encoder->power_domain))
+		return false;
+
+	for_each_dsi_port(port, intel_dsi->ports) {
+		dsi_trans = dsi_port_to_transcoder(port);
+		tmp = I915_READ(TRANS_DDI_FUNC_CTL(dsi_trans));
+		switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
+		case TRANS_DDI_EDP_INPUT_A_ON:
+			*pipe = PIPE_A;
+			break;
+		case TRANS_DDI_EDP_INPUT_B_ONOFF:
+			*pipe = PIPE_B;
+			break;
+		case TRANS_DDI_EDP_INPUT_C_ONOFF:
+			*pipe = PIPE_C;
+			break;
+		default:
+			DRM_ERROR("Invalid PIPE input\n");
+			goto out;
+		}
+
+		tmp = I915_READ(PIPECONF(dsi_trans));
+		ret = tmp & PIPECONF_ENABLE;
+	}
+out:
+	intel_display_power_put(dev_priv, encoder->power_domain);
+	return ret;
+}
+
 static void gen11_dsi_encoder_destroy(struct drm_encoder *encoder)
 {
 	intel_encoder_destroy(encoder);
@@ -1166,6 +1206,7 @@ void icl_dsi_init(struct drm_i915_private *dev_priv)
 	encoder->disable = gen11_dsi_disable;
 	encoder->port = port;
 	encoder->get_config = gen11_dsi_get_config;
+	encoder->get_hw_state = gen11_dsi_get_hw_state;
 	encoder->type = INTEL_OUTPUT_DSI;
 	encoder->cloneable = 0;
 	encoder->crtc_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C);
@@ -1177,6 +1218,7 @@ void icl_dsi_init(struct drm_i915_private *dev_priv)
 	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 	connector->interlace_allowed = false;
 	connector->doublescan_allowed = false;
+	intel_connector->get_hw_state = intel_connector_get_hw_state;
 
 	/* attach connector to encoder */
 	intel_connector_attach_encoder(intel_connector, encoder);
-- 
2.11.0



More information about the Intel-gfx mailing list