[Intel-gfx] [PATCH v8 34/38] drm/i915/icl: Add changes to program DSI panel GPIOs

[Jani Nikula]

From: Madhav Chauhan <madhav.chauhan at intel.com>

For ICELAKE DSI, Display Pins are the only GPIOs
that need to be programmed. So DSI driver should have
its own implementation to toggle these pins based on
GPIO info coming from VBT sequences instead of using
platform specific GPIO driver.

Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/intel_dsi_vbt.c | 46 +++++++++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
index 8177305b9c87..04423248bbd7 100644
--- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
@@ -334,6 +334,48 @@ static void bxt_exec_gpio(struct drm_i915_private *dev_priv,
 	gpiod_set_value(gpio_desc, value);
 }
 
+static void icl_exec_gpio(struct drm_i915_private *dev_priv,
+			  u8 gpio_source, u8 gpio_index, bool value)
+{
+	u32 val;
+
+	switch (gpio_index) {
+	case ICL_GPIO_DDSP_HPD_A:
+		val = I915_READ(SHOTPLUG_CTL_DDI);
+		val &= ~ICP_DDIA_HPD_ENABLE;
+		I915_WRITE(SHOTPLUG_CTL_DDI, val);
+		val = I915_READ(SHOTPLUG_CTL_DDI);
+
+		if (value)
+			val |= ICP_DDIA_HPD_OP_DRIVE_1;
+		else
+			val &= ~ICP_DDIA_HPD_OP_DRIVE_1;
+
+		I915_WRITE(SHOTPLUG_CTL_DDI, val);
+		break;
+	case ICL_GPIO_L_VDDEN_1:
+		val = I915_READ(ICP_PP_CONTROL(1));
+		if (value)
+			val |= PWR_STATE_TARGET;
+		else
+			val &= ~PWR_STATE_TARGET;
+		I915_WRITE(ICP_PP_CONTROL(1), val);
+		break;
+	case ICL_GPIO_L_BKLTEN_1:
+		val = I915_READ(ICP_PP_CONTROL(1));
+		if (value)
+			val |= BACKLIGHT_ENABLE;
+		else
+			val &= ~BACKLIGHT_ENABLE;
+		I915_WRITE(ICP_PP_CONTROL(1), val);
+		break;
+	default:
+		/* TODO: Add support for remaining GPIOs */
+		DRM_ERROR("Invalid GPIO no from VBT\n");
+		break;
+	}
+}
+
 static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
 {
 	struct drm_device *dev = intel_dsi->base.base.dev;
@@ -357,7 +399,9 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
 	/* pull up/down */
 	value = *data++ & 1;
 
-	if (IS_VALLEYVIEW(dev_priv))
+	if (IS_ICELAKE(dev_priv))
+		icl_exec_gpio(dev_priv, gpio_source, gpio_index, value);
+	else if (IS_VALLEYVIEW(dev_priv))
 		vlv_exec_gpio(dev_priv, gpio_source, gpio_number, value);
 	else if (IS_CHERRYVIEW(dev_priv))
 		chv_exec_gpio(dev_priv, gpio_source, gpio_number, value);
-- 
2.11.0