[Intel-gfx] [PATCH 5/8] drm/i915: Enable AUX power earlier

Souza, Jose jose.souza at intel.com
Tue Oct 30 23:18:09 UTC 2018


On Wed, 2018-10-31 at 01:12 +0200, Imre Deak wrote:
> On Wed, Oct 31, 2018 at 01:07:04AM +0200, Souza, Jose wrote:
> > On Tue, 2018-10-30 at 17:40 +0200, Imre Deak wrote:
> > > For DDI/TypeC ports the AUX power domain needs to be enabled
> > > before
> > > the
> > > port's PLL is enabled, so move the enabling earlier accordingly.
> > 
> > Could you just pointed out where did you got this information? I
> > checked in this Bspec pages 20845, 20598 and 21750 and I did not
> > found.
> 
> It's at 21750, connect/disconnect flows.

What piece specifically?
The only related that I can find is this one:
"Aux power must be enabled while using Aux channel or the main link
(including HDMI). It should be disabled to save power when not using
Aux channel or main link."

> 
> > With that:
> > Reviewed-by: José Roberto de Souza <jose.souza at intel.com>
> > 
> > > Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > Signed-off-by: Imre Deak <imre.deak at intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/intel_ddi.c     | 46
> > > +++++++++++++++++++++++++-
> > > ----------
> > >  drivers/gpu/drm/i915/intel_display.c |  2 ++
> > >  2 files changed, 34 insertions(+), 14 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> > > b/drivers/gpu/drm/i915/intel_ddi.c
> > > index 5bb459011a49..7731ca704862 100644
> > > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > > @@ -2082,10 +2082,8 @@ bool intel_ddi_get_hw_state(struct
> > > intel_encoder *encoder,
> > >  }
> > >  
> > >  static inline enum intel_display_power_domain
> > > -intel_ddi_main_link_aux_domain(struct intel_dp *intel_dp)
> > > +intel_ddi_main_link_aux_domain(struct intel_digital_port
> > > *dig_port)
> > >  {
> > > -	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> > > -
> > >  	/* CNL+ HW requires corresponding AUX IOs to be powered up for
> > > PSR with
> > >  	 * DC states enabled at the same time, while for driver
> > > initiated AUX
> > >  	 * transfers we need the same AUX IOs to be powered but with DC
> > > states
> > > @@ -2120,11 +2118,8 @@ static u64
> > > intel_ddi_get_power_domains(struct
> > > intel_encoder *encoder,
> > >  	domains = BIT_ULL(dig_port->ddi_io_power_domain);
> > >  
> > >  	/* AUX power is only needed for (e)DP mode, not for HDMI. */
> > > -	if (intel_crtc_has_dp_encoder(crtc_state)) {
> > > -		struct intel_dp *intel_dp = &dig_port->dp;
> > > -
> > > -		domains |=
> > > BIT_ULL(intel_ddi_main_link_aux_domain(intel_dp));
> > > -	}
> > > +	if (intel_crtc_has_dp_encoder(crtc_state))
> > > +		domains |=
> > > BIT_ULL(intel_ddi_main_link_aux_domain(dig_port));
> > >  
> > >  	return domains;
> > >  }
> > > @@ -2891,6 +2886,32 @@ static void intel_ddi_clk_disable(struct
> > > intel_encoder *encoder)
> > >  	}
> > >  }
> > >  
> > > +static void
> > > +intel_ddi_pre_pll_enable(struct intel_encoder *encoder,
> > > +			 const struct intel_crtc_state *crtc_state,
> > > +			 const struct drm_connector_state *conn_state)
> > > +{
> > > +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > > +	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder-
> > > > base);
> > > +
> > > +	if (intel_crtc_has_dp_encoder(crtc_state))
> > > +		intel_display_power_get(dev_priv,
> > > +					intel_ddi_main_link_aux_domain(
> > > dig_port));
> > > +}
> > > +
> > > +static void
> > > +intel_ddi_post_pll_disable(struct intel_encoder *encoder,
> > > +			   const struct intel_crtc_state *crtc_state,
> > > +			   const struct drm_connector_state
> > > *conn_state)
> > > +{
> > > +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > > +	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder-
> > > > base);
> > > +
> > > +	if (intel_crtc_has_dp_encoder(crtc_state))
> > > +		intel_display_power_put(dev_priv,
> > > +					intel_ddi_main_link_aux_domain(
> > > dig_port));
> > > +}
> > > +
> > >  static void intel_ddi_pre_enable_dp(struct intel_encoder
> > > *encoder,
> > >  				    const struct intel_crtc_state
> > > *crtc_state,
> > >  				    const struct drm_connector_state
> > > *conn_state)
> > > @@ -2904,9 +2925,6 @@ static void intel_ddi_pre_enable_dp(struct
> > > intel_encoder *encoder,
> > >  
> > >  	WARN_ON(is_mst && (port == PORT_A || port == PORT_E));
> > >  
> > > -	intel_display_power_get(dev_priv,
> > > -				intel_ddi_main_link_aux_domain(intel_dp
> > > ));
> > > -
> > >  	intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
> > >  				 crtc_state->lane_count, is_mst);
> > >  
> > > @@ -3071,9 +3089,6 @@ static void
> > > intel_ddi_post_disable_dp(struct
> > > intel_encoder *encoder,
> > >  	intel_display_power_put(dev_priv, dig_port-
> > > > ddi_io_power_domain);
> > >  
> > >  	intel_ddi_clk_disable(encoder);
> > > -
> > > -	intel_display_power_put(dev_priv,
> > > -				intel_ddi_main_link_aux_domain(intel_dp
> > > ));
> > >  }
> > >  
> > >  static void intel_ddi_post_disable_hdmi(struct intel_encoder
> > > *encoder,
> > > @@ -3830,6 +3845,9 @@ void intel_ddi_init(struct drm_i915_private
> > > *dev_priv, enum port port)
> > >  	intel_encoder->enable = intel_enable_ddi;
> > >  	if (IS_GEN9_LP(dev_priv))
> > >  		intel_encoder->pre_pll_enable = bxt_ddi_pre_pll_enable;
> > > +
> > > +	intel_encoder->pre_pll_enable = intel_ddi_pre_pll_enable;
> > > +	intel_encoder->post_pll_disable = intel_ddi_post_pll_disable;
> > >  	intel_encoder->pre_enable = intel_ddi_pre_enable;
> > >  	intel_encoder->disable = intel_disable_ddi;
> > >  	intel_encoder->post_disable = intel_ddi_post_disable;
> > > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > > b/drivers/gpu/drm/i915/intel_display.c
> > > index 36710a30fb37..12ba2b923e6b 100644
> > > --- a/drivers/gpu/drm/i915/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/intel_display.c
> > > @@ -5876,6 +5876,8 @@ static void haswell_crtc_disable(struct
> > > intel_crtc_state *old_crtc_state,
> > >  
> > >  	if (INTEL_GEN(dev_priv) >= 11)
> > >  		icl_unmap_plls_to_ports(crtc, old_crtc_state,
> > > old_state);
> > > +
> > > +	intel_encoders_post_pll_disable(crtc, old_crtc_state,
> > > old_state);
> > >  }
> > >  
> > >  static void i9xx_pfit_enable(const struct intel_crtc_state
> > > *crtc_state)


More information about the Intel-gfx mailing list