[Intel-gfx] [PATCH 5/8] drm/i915: Enable AUX power earlier
Souza, Jose
jose.souza at intel.com
Tue Oct 30 23:52:58 UTC 2018
On Wed, 2018-10-31 at 01:28 +0200, Imre Deak wrote:
> On Wed, Oct 31, 2018 at 01:18:09AM +0200, Souza, Jose wrote:
> > On Wed, 2018-10-31 at 01:12 +0200, Imre Deak wrote:
> > > On Wed, Oct 31, 2018 at 01:07:04AM +0200, Souza, Jose wrote:
> > > > On Tue, 2018-10-30 at 17:40 +0200, Imre Deak wrote:
> > > > > For DDI/TypeC ports the AUX power domain needs to be enabled
> > > > > before
> > > > > the
> > > > > port's PLL is enabled, so move the enabling earlier
> > > > > accordingly.
> > > >
> > > > Could you just pointed out where did you got this information?
> > > > I
> > > > checked in this Bspec pages 20845, 20598 and 21750 and I did
> > > > not
> > > > found.
> > >
> > > It's at 21750, connect/disconnect flows.
> >
> > What piece specifically?
> > The only related that I can find is this one:
> > "Aux power must be enabled while using Aux channel or the main link
> > (including HDMI). It should be disabled to save power when not
> > using
> > Aux channel or main link."
>
> We can do AUX transfers even before enabling the main link, where we
> enable already AUX power. In fact all the connect flows have:
>
> "Display software issues AUX reads for EDID/DPCD."
>
> So now if we enabled it after PLL programming we'd have the two
> things
> happen in both orders, which I'd rather not do, if not necessary.
I still don't get your point.
The reads for EDID/DPCD is executed way before PLL programming, so it
will still enable and disable power aux power wells.
Also I did not found any aux transactions between the current places
that gets and puts a aux power well reference.
haswell_crtc_enable()
intel_encoders_pre_pll_enable(crtc, pipe_config, old_state);
if (pipe_config->shared_dpll)
intel_enable_shared_dpll(pipe_config);
if (INTEL_GEN(dev_priv) >= 11)
icl_map_plls_to_ports(crtc, pipe_config, old_state);
intel_encoders_pre_enable(crtc, pipe_config, old_state);
haswell_crtc_disable()
intel_encoders_post_disable(crtc, old_crtc_state, old_state);
if (INTEL_GEN(dev_priv) >= 11)
icl_unmap_plls_to_ports(crtc, old_crtc_state,
old_state);
intel_encoders_post_pll_disable(crtc, old_crtc_state,
old_state);
So if it is not sequence or requirement I don't see why we should
enable earlier.
>
> > > > With that:
> > > > Reviewed-by: José Roberto de Souza <jose.souza at intel.com>
> > > >
> > > > > Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> > > > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > > > Signed-off-by: Imre Deak <imre.deak at intel.com>
> > > > > ---
> > > > > drivers/gpu/drm/i915/intel_ddi.c | 46
> > > > > +++++++++++++++++++++++++-
> > > > > ----------
> > > > > drivers/gpu/drm/i915/intel_display.c | 2 ++
> > > > > 2 files changed, 34 insertions(+), 14 deletions(-)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> > > > > b/drivers/gpu/drm/i915/intel_ddi.c
> > > > > index 5bb459011a49..7731ca704862 100644
> > > > > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > > > > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > > > > @@ -2082,10 +2082,8 @@ bool intel_ddi_get_hw_state(struct
> > > > > intel_encoder *encoder,
> > > > > }
> > > > >
> > > > > static inline enum intel_display_power_domain
> > > > > -intel_ddi_main_link_aux_domain(struct intel_dp *intel_dp)
> > > > > +intel_ddi_main_link_aux_domain(struct intel_digital_port
> > > > > *dig_port)
> > > > > {
> > > > > - struct intel_digital_port *dig_port =
> > > > > dp_to_dig_port(intel_dp);
> > > > > -
> > > > > /* CNL+ HW requires corresponding AUX IOs to be powered
> > > > > up for
> > > > > PSR with
> > > > > * DC states enabled at the same time, while for driver
> > > > > initiated AUX
> > > > > * transfers we need the same AUX IOs to be powered but
> > > > > with DC
> > > > > states
> > > > > @@ -2120,11 +2118,8 @@ static u64
> > > > > intel_ddi_get_power_domains(struct
> > > > > intel_encoder *encoder,
> > > > > domains = BIT_ULL(dig_port->ddi_io_power_domain);
> > > > >
> > > > > /* AUX power is only needed for (e)DP mode, not for
> > > > > HDMI. */
> > > > > - if (intel_crtc_has_dp_encoder(crtc_state)) {
> > > > > - struct intel_dp *intel_dp = &dig_port->dp;
> > > > > -
> > > > > - domains |=
> > > > > BIT_ULL(intel_ddi_main_link_aux_domain(intel_dp));
> > > > > - }
> > > > > + if (intel_crtc_has_dp_encoder(crtc_state))
> > > > > + domains |=
> > > > > BIT_ULL(intel_ddi_main_link_aux_domain(dig_port));
> > > > >
> > > > > return domains;
> > > > > }
> > > > > @@ -2891,6 +2886,32 @@ static void
> > > > > intel_ddi_clk_disable(struct
> > > > > intel_encoder *encoder)
> > > > > }
> > > > > }
> > > > >
> > > > > +static void
> > > > > +intel_ddi_pre_pll_enable(struct intel_encoder *encoder,
> > > > > + const struct intel_crtc_state
> > > > > *crtc_state,
> > > > > + const struct drm_connector_state
> > > > > *conn_state)
> > > > > +{
> > > > > + struct drm_i915_private *dev_priv = to_i915(encoder-
> > > > > >base.dev);
> > > > > + struct intel_digital_port *dig_port =
> > > > > enc_to_dig_port(&encoder-
> > > > > > base);
> > > > > +
> > > > > + if (intel_crtc_has_dp_encoder(crtc_state))
> > > > > + intel_display_power_get(dev_priv,
> > > > > + intel_ddi_main_link_aux
> > > > > _domain(
> > > > > dig_port));
> > > > > +}
> > > > > +
> > > > > +static void
> > > > > +intel_ddi_post_pll_disable(struct intel_encoder *encoder,
> > > > > + const struct intel_crtc_state
> > > > > *crtc_state,
> > > > > + const struct drm_connector_state
> > > > > *conn_state)
> > > > > +{
> > > > > + struct drm_i915_private *dev_priv = to_i915(encoder-
> > > > > >base.dev);
> > > > > + struct intel_digital_port *dig_port =
> > > > > enc_to_dig_port(&encoder-
> > > > > > base);
> > > > > +
> > > > > + if (intel_crtc_has_dp_encoder(crtc_state))
> > > > > + intel_display_power_put(dev_priv,
> > > > > + intel_ddi_main_link_aux
> > > > > _domain(
> > > > > dig_port));
> > > > > +}
> > > > > +
> > > > > static void intel_ddi_pre_enable_dp(struct intel_encoder
> > > > > *encoder,
> > > > > const struct
> > > > > intel_crtc_state
> > > > > *crtc_state,
> > > > > const struct
> > > > > drm_connector_state
> > > > > *conn_state)
> > > > > @@ -2904,9 +2925,6 @@ static void
> > > > > intel_ddi_pre_enable_dp(struct
> > > > > intel_encoder *encoder,
> > > > >
> > > > > WARN_ON(is_mst && (port == PORT_A || port == PORT_E));
> > > > >
> > > > > - intel_display_power_get(dev_priv,
> > > > > - intel_ddi_main_link_aux_domain(
> > > > > intel_dp
> > > > > ));
> > > > > -
> > > > > intel_dp_set_link_params(intel_dp, crtc_state-
> > > > > >port_clock,
> > > > > crtc_state->lane_count,
> > > > > is_mst);
> > > > >
> > > > > @@ -3071,9 +3089,6 @@ static void
> > > > > intel_ddi_post_disable_dp(struct
> > > > > intel_encoder *encoder,
> > > > > intel_display_power_put(dev_priv, dig_port-
> > > > > > ddi_io_power_domain);
> > > > >
> > > > > intel_ddi_clk_disable(encoder);
> > > > > -
> > > > > - intel_display_power_put(dev_priv,
> > > > > - intel_ddi_main_link_aux_domain(
> > > > > intel_dp
> > > > > ));
> > > > > }
> > > > >
> > > > > static void intel_ddi_post_disable_hdmi(struct intel_encoder
> > > > > *encoder,
> > > > > @@ -3830,6 +3845,9 @@ void intel_ddi_init(struct
> > > > > drm_i915_private
> > > > > *dev_priv, enum port port)
> > > > > intel_encoder->enable = intel_enable_ddi;
> > > > > if (IS_GEN9_LP(dev_priv))
> > > > > intel_encoder->pre_pll_enable =
> > > > > bxt_ddi_pre_pll_enable;
> > > > > +
> > > > > + intel_encoder->pre_pll_enable =
> > > > > intel_ddi_pre_pll_enable;
> > > > > + intel_encoder->post_pll_disable =
> > > > > intel_ddi_post_pll_disable;
> > > > > intel_encoder->pre_enable = intel_ddi_pre_enable;
> > > > > intel_encoder->disable = intel_disable_ddi;
> > > > > intel_encoder->post_disable = intel_ddi_post_disable;
> > > > > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > > > > b/drivers/gpu/drm/i915/intel_display.c
> > > > > index 36710a30fb37..12ba2b923e6b 100644
> > > > > --- a/drivers/gpu/drm/i915/intel_display.c
> > > > > +++ b/drivers/gpu/drm/i915/intel_display.c
> > > > > @@ -5876,6 +5876,8 @@ static void haswell_crtc_disable(struct
> > > > > intel_crtc_state *old_crtc_state,
> > > > >
> > > > > if (INTEL_GEN(dev_priv) >= 11)
> > > > > icl_unmap_plls_to_ports(crtc, old_crtc_state,
> > > > > old_state);
> > > > > +
> > > > > + intel_encoders_post_pll_disable(crtc, old_crtc_state,
> > > > > old_state);
> > > > > }
> > > > >
> > > > > static void i9xx_pfit_enable(const struct intel_crtc_state
> > > > > *crtc_state)
More information about the Intel-gfx
mailing list