[Intel-gfx] [v5 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion

Shankar, Uma uma.shankar at intel.com
Wed Oct 31 12:56:13 UTC 2018



>-----Original Message-----
>From: Maarten Lankhorst [mailto:maarten.lankhorst at linux.intel.com]
>Sent: Tuesday, October 30, 2018 4:25 PM
>To: Shankar, Uma <uma.shankar at intel.com>; intel-gfx at lists.freedesktop.org
>Cc: Syrjala, Ville <ville.syrjala at intel.com>; Lankhorst, Maarten
><maarten.lankhorst at intel.com>
>Subject: Re: [Intel-gfx] [v5 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to
>RGB Conversion
>
>Op 26-10-18 om 12:01 schreef Uma Shankar:
>> Plane input CSC needs to be enabled to convert frambuffers from YUV to
>> RGB. This is needed for bottom 3 planes on ICL, rest of the planes
>> have hardcoded conversion and taken care by the legacy code.
>>
>> This patch defines the co-efficient values for YUV to RGB conversion
>> in BT709 and BT601 formats. It programs the coefficients and enables
>> the plane input csc unit in hardware.
>>
>> Note: This is currently untested and floated to get an early feedback
>> on the design and implementation for this feature. In parallel, I will
>> test this on actual ICL hardware and confirm with planar formats.
>>
>> v2: Addressed Maarten's and Ville's review comments and added the
>> coefficients in a 2D array instead of independent Macros.
>>
>> v3: Added individual coefficient matrix (9 values) instead of 6
>> register values as per Maarten's comment. Also addresed a shift issue
>> with B channel coefficient.
>>
>> v4: Added support for Limited Range Color Handling
>>
>> v5: Fixed Matt and Maarten's review comments.
>>
>> Signed-off-by: Uma Shankar <uma.shankar at intel.com>
>> ---
>>  drivers/gpu/drm/i915/intel_color.c   | 79
>++++++++++++++++++++++++++++++++++++
>>  drivers/gpu/drm/i915/intel_display.c | 23 ++++++++---
>>  drivers/gpu/drm/i915/intel_drv.h     |  2 +
>>  3 files changed, 98 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_color.c
>> b/drivers/gpu/drm/i915/intel_color.c
>> index 5127da2..681cd13 100644
>> --- a/drivers/gpu/drm/i915/intel_color.c
>> +++ b/drivers/gpu/drm/i915/intel_color.c
>> @@ -57,6 +57,15 @@
>>  #define CSC_RGB_TO_YUV_RV_GV 0xbce89ad8  #define
>CSC_RGB_TO_YUV_BV
>> 0x1e080000
>>
>> +#define  ROFF(x)          (((x) & 0xffff) << 16)
>> +#define  GOFF(x)          (((x) & 0xffff) << 0)
>> +#define  BOFF(x)          (((x) & 0xffff) << 16)
>> +
>> +/* Preoffset values for YUV to RGB Conversion */
>> +#define PREOFF_YUV_TO_RGB_HI		0x1800
>> +#define PREOFF_YUV_TO_RGB_ME		0x1F00
>> +#define PREOFF_YUV_TO_RGB_LO		0x1800
>> +
>>  /*
>>   * Extract the CSC coefficient from a CTM coefficient (in U32.32 fixed point
>>   * format). This macro takes the coefficient we want transformed and
>> the @@ -643,6 +652,76 @@ int intel_color_check(struct drm_crtc *crtc,
>>  	return -EINVAL;
>>  }
>>
>> +void icl_program_input_csc_coeff(const struct intel_crtc_state *crtc_state,
>> +				 const struct intel_plane_state *plane_state) {
>> +	struct drm_i915_private *dev_priv =
>> +		to_i915(plane_state->base.plane->dev);
>> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
>> +	enum pipe pipe = crtc->pipe;
>> +	struct intel_plane *intel_plane =
>> +		to_intel_plane(plane_state->base.plane);
>> +	enum plane_id plane = intel_plane->id;
>> +
>> +	static const u16 input_csc_matrix[][9] = {
>> +		/* BT.601 full range YCbCr -> full range RGB */
>> +		[DRM_COLOR_YCBCR_BT601] = {
>> +			0x7AF8, 0x7800, 0x0,
>> +			0x8B28, 0x7800, 0x9AC0,
>> +			0x0, 0x7800, 0x7DD8,
>> +		},
>> +		/* BT.709 full range YCbCr -> full range RGB */
>> +		[DRM_COLOR_YCBCR_BT709] = {
>> +			0x7C98, 0x7800, 0x0,
>> +			0x9EF8, 0x7800, 0xABF8,
>> +			0x0, 0x7800,  0x7ED8,
>> +		},
>> +	};
>> +
>> +	/* Matrix for Limited Range to Full Range Conversion */
>> +	static const u16 input_csc_matrix_lr[][9] = {
>> +		/* BT.601 Limted range YCbCr -> full range RGB */
>> +		[DRM_COLOR_YCBCR_BT601] = {
>> +			0x7CC8, 0x7950, 0x0,
>> +			0x8CB8, 0x7918, 0x9C40,
>> +			0x0, 0x7918, 0x7FC8,
>> +		},
>> +		/* BT.709 Limited range YCbCr -> full range RGB */
>> +		[DRM_COLOR_YCBCR_BT709] = {
>> +			0x7EA8, 0x7950, 0x0,
>> +			0x8888, 0x7918, 0xADA8,
>> +			0x0, 0x7918,  0x6870,
>> +		},
>> +	};
>> +	const u16 *csc;
>> +
>> +	if (plane_state->base.color_range ==
>DRM_COLOR_YCBCR_FULL_RANGE)
>> +		csc = input_csc_matrix[plane_state->base.color_encoding];
>> +	else
>> +		csc = input_csc_matrix_lr[plane_state->base.color_encoding];
>> +
>> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 0), ROFF(csc[0]) |
>> +		   GOFF(csc[1]));
>> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 1), BOFF(csc[2]));
>> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 2), ROFF(csc[3]) |
>> +		   GOFF(csc[4]));
>> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 3), BOFF(csc[5]));
>> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 4), ROFF(csc[6]) |
>> +		   GOFF(csc[7]));
>> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 5), BOFF(csc[8]));
>> +
>> +	I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 0),
>> +		   PREOFF_YUV_TO_RGB_HI);
>> +	I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 1),
>> +		   PREOFF_YUV_TO_RGB_ME);
>> +	I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 2),
>> +		   PREOFF_YUV_TO_RGB_LO);
>> +
>> +	I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 0), 0x0);
>> +	I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 1), 0x0);
>> +	I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 2), 0x0); }
>> +
>>  void intel_color_init(struct drm_crtc *crtc)  {
>>  	struct drm_i915_private *dev_priv = to_i915(crtc->dev); diff --git
>> a/drivers/gpu/drm/i915/intel_display.c
>> b/drivers/gpu/drm/i915/intel_display.c
>> index fe045ab..d16a064 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -3666,6 +3666,7 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state
>*crtc_state,
>>  	struct drm_i915_private *dev_priv =
>>  		to_i915(plane_state->base.plane->dev);
>>  	const struct drm_framebuffer *fb = plane_state->base.fb;
>> +	struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
>>  	u32 plane_color_ctl = 0;
>>
>>  	if (INTEL_GEN(dev_priv) < 11) {
>> @@ -3676,13 +3677,23 @@ u32 glk_plane_color_ctl(const struct
>intel_crtc_state *crtc_state,
>>  	plane_color_ctl |= glk_plane_color_ctl_alpha(plane_state);
>>
>>  	if (fb->format->is_yuv) {
>> -		if (plane_state->base.color_encoding ==
>DRM_COLOR_YCBCR_BT709)
>> -			plane_color_ctl |=
>PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
>> -		else
>> -			plane_color_ctl |=
>PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
>> +		if (!icl_is_hdr_plane(plane)) {
>> +			if (plane_state->base.color_encoding ==
>> +					DRM_COLOR_YCBCR_BT709)
>> +				plane_color_ctl |=
>> +
>	PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
>> +			else
>> +				plane_color_ctl |=
>> +
>	PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
>>
>> -		if (plane_state->base.color_range ==
>DRM_COLOR_YCBCR_FULL_RANGE)
>> -			plane_color_ctl |=
>PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
>> +			if (plane_state->base.color_range ==
>> +					DRM_COLOR_YCBCR_FULL_RANGE)
>> +				plane_color_ctl |=
>> +
>	PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
>> +		} else {
>> +			icl_program_input_csc_coeff(crtc_state, plane_state);
>> +			plane_color_ctl |= PLANE_COLOR_INPUT_CSC_ENABLE;
>> +		}
>>  	}
>>
>>  	return plane_color_ctl;
>> diff --git a/drivers/gpu/drm/i915/intel_drv.h
>> b/drivers/gpu/drm/i915/intel_drv.h
>> index db24308..bd9e946 100644
>> --- a/drivers/gpu/drm/i915/intel_drv.h
>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>> @@ -2285,6 +2285,8 @@ int intel_plane_atomic_check_with_state(const
>> struct intel_crtc_state *old_crtc_  int intel_color_check(struct
>> drm_crtc *crtc, struct drm_crtc_state *state);  void
>> intel_color_set_csc(struct drm_crtc_state *crtc_state);  void
>> intel_color_load_luts(struct drm_crtc_state *crtc_state);
>> +void icl_program_input_csc_coeff(const struct intel_crtc_state *crtc_state,
>> +				 const struct intel_plane_state *plane_state);
>>
>>  /* intel_lspcon.c */
>>  bool lspcon_init(struct intel_digital_port *intel_dig_port);
>
>Did some testing with this patch and got these values for HDR vs SDR planes..
>
>Reference image, our NV12 implementation puts the chroma pixel center on the
>left, so the gray values are ignored:
>https://mblankhorst.nl/etc/nv12-reference.png
>
>HDR plane with input CSC:
>https://mblankhorst.nl/etc/nv12-hdr.png
>
>SDR plane with fixed CSC:
>https://mblankhorst.nl/etc/nv12-sdr.png
>
>Looks like the SDR plane colors are slightly off between white and black, but HDR
>is what I expect it to be.
>
>So I think patches look good, and if you implement Matt's suggestions, then this
>series is:
>Reviewed-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>

Surely will address Matt's comment and update the series. Thanks a lot for trying this out
and all your valuable feedback and review comments on this.

Regards,
Uma Shankar


More information about the Intel-gfx mailing list