[Intel-gfx] [v6 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion

Matt Roper matthew.d.roper at intel.com
Wed Oct 31 17:02:10 UTC 2018


On Wed, Oct 31, 2018 at 07:05:31PM +0530, Uma Shankar wrote:
> Plane input CSC needs to be enabled to convert frambuffers from
> YUV to RGB. This is needed for bottom 3 planes on ICL, rest of
> the planes have hardcoded conversion and taken care by the legacy
> code.
> 
> This patch defines the co-efficient values for YUV to RGB conversion
> in BT709 and BT601 formats. It programs the coefficients and enables
> the plane input csc unit in hardware.
> 
> This has been verified and tested by Maarten and the change is working
> as expected.
> 
> v2: Addressed Maarten's and Ville's review comments and added the
> coefficients in a 2D array instead of independent Macros.
> 
> v3: Added individual coefficient matrix (9 values) instead of 6
> register values as per Maarten's comment. Also addresed a shift
> issue with B channel coefficient.
> 
> v4: Added support for Limited Range Color Handling
> 
> v5: Fixed Matt and Maarten's review comments.
> 
> v6: Added human readable matrix values for YUV to RGB Conversion along
> with just the bspec register values, as per Matt's suggestion.
> 
> Signed-off-by: Uma Shankar <uma.shankar at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_color.c   | 103 +++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_display.c |  23 ++++++--
>  drivers/gpu/drm/i915/intel_drv.h     |   2 +
>  3 files changed, 122 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
> index 5127da2..6dc9075 100644
> --- a/drivers/gpu/drm/i915/intel_color.c
> +++ b/drivers/gpu/drm/i915/intel_color.c
> @@ -57,6 +57,15 @@
>  #define CSC_RGB_TO_YUV_RV_GV 0xbce89ad8
>  #define CSC_RGB_TO_YUV_BV 0x1e080000
>  
> +#define  ROFF(x)          (((x) & 0xffff) << 16)
> +#define  GOFF(x)          (((x) & 0xffff) << 0)
> +#define  BOFF(x)          (((x) & 0xffff) << 16)
> +
> +/* Preoffset values for YUV to RGB Conversion */
> +#define PREOFF_YUV_TO_RGB_HI		0x1800
> +#define PREOFF_YUV_TO_RGB_ME		0x1F00
> +#define PREOFF_YUV_TO_RGB_LO		0x1800
> +
>  /*
>   * Extract the CSC coefficient from a CTM coefficient (in U32.32 fixed point
>   * format). This macro takes the coefficient we want transformed and the
> @@ -643,6 +652,100 @@ int intel_color_check(struct drm_crtc *crtc,
>  	return -EINVAL;
>  }
>  
> +void icl_program_input_csc_coeff(const struct intel_crtc_state *crtc_state,
> +				 const struct intel_plane_state *plane_state)
> +{
> +	struct drm_i915_private *dev_priv =
> +		to_i915(plane_state->base.plane->dev);
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> +	enum pipe pipe = crtc->pipe;
> +	struct intel_plane *intel_plane =
> +		to_intel_plane(plane_state->base.plane);
> +	enum plane_id plane = intel_plane->id;
> +
> +	static const u16 input_csc_matrix[][9] = {
> +		/*
> +		 * BT.601 full range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.000, 0.000, 1.371,
> +		 *  1.000, -0.336, -0.698,
> +		 *  1.000, 1.732, 0.0000]
> +		 */
> +		[DRM_COLOR_YCBCR_BT601] = {
> +			0x7AF8, 0x7800, 0x0,
> +			0x8B28, 0x7800, 0x9AC0,
> +			0x0, 0x7800, 0x7DD8,
> +		},
> +		/*
> +		 * BT.709 full range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.000, 0.000, 1.574,
> +		 *  1.000, -0.187, -0.468,
> +		 *  1.000, 1.855, 0.0000]
> +		 */
> +		[DRM_COLOR_YCBCR_BT709] = {
> +			0x7C98, 0x7800, 0x0,
> +			0x9EF8, 0x7800, 0xABF8,
> +			0x0, 0x7800,  0x7ED8,
> +		},
> +	};
> +
> +	/* Matrix for Limited Range to Full Range Conversion */
> +	static const u16 input_csc_matrix_lr[][9] = {
> +		/*
> +		 * BT.601 Limted range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.164384, 0.000, 1.596370,
> +		 *  1.138393, -0.382500, -0.794598,
> +		 *  1.138393, 1.971696, 0.0000]
> +		 */
> +		[DRM_COLOR_YCBCR_BT601] = {
> +			0x7CC8, 0x7950, 0x0,
> +			0x8CB8, 0x7918, 0x9C40,
> +			0x0, 0x7918, 0x7FC8,
> +		},
> +		/*
> +		 * BT.709 Limited range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.164, 0.000, 1.833671,
> +		 *  1.138393, -0.213249, -0.532909,
> +		 *  1.138393, 2.112402, 0.0000]
> +		 */

Did you scale the BT.709 values slightly differently than the BT.601
values above?  The non-0/1 values don't seem to be exactly full*255/224
or full*255/219, but they're still close enough though that the hex
representation comes out the same for all of the values except for the
0xADA8 (which I get as 0xADA0).  So double-check that, but otherwise the
patch is,

Reviewed-by: Matt Roper <matthew.d.roper at intel.com>

> +		[DRM_COLOR_YCBCR_BT709] = {
> +			0x7EA8, 0x7950, 0x0,
> +			0x8888, 0x7918, 0xADA8,
> +			0x0, 0x7918,  0x6870,
> +		},
> +	};
> +	const u16 *csc;
> +
> +	if (plane_state->base.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
> +		csc = input_csc_matrix[plane_state->base.color_encoding];
> +	else
> +		csc = input_csc_matrix_lr[plane_state->base.color_encoding];
> +
> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 0), ROFF(csc[0]) |
> +		   GOFF(csc[1]));
> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 1), BOFF(csc[2]));
> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 2), ROFF(csc[3]) |
> +		   GOFF(csc[4]));
> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 3), BOFF(csc[5]));
> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 4), ROFF(csc[6]) |
> +		   GOFF(csc[7]));
> +	I915_WRITE(PLANE_INPUT_CSC_COEFF(pipe, plane, 5), BOFF(csc[8]));
> +
> +	I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 0),
> +		   PREOFF_YUV_TO_RGB_HI);
> +	I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 1),
> +		   PREOFF_YUV_TO_RGB_ME);
> +	I915_WRITE(PLANE_INPUT_CSC_PREOFF(pipe, plane, 2),
> +		   PREOFF_YUV_TO_RGB_LO);
> +
> +	I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 0), 0x0);
> +	I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 1), 0x0);
> +	I915_WRITE(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 2), 0x0);
> +}
> +
>  void intel_color_init(struct drm_crtc *crtc)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index fe045ab..d16a064 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3666,6 +3666,7 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
>  	struct drm_i915_private *dev_priv =
>  		to_i915(plane_state->base.plane->dev);
>  	const struct drm_framebuffer *fb = plane_state->base.fb;
> +	struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
>  	u32 plane_color_ctl = 0;
>  
>  	if (INTEL_GEN(dev_priv) < 11) {
> @@ -3676,13 +3677,23 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
>  	plane_color_ctl |= glk_plane_color_ctl_alpha(plane_state);
>  
>  	if (fb->format->is_yuv) {
> -		if (plane_state->base.color_encoding == DRM_COLOR_YCBCR_BT709)
> -			plane_color_ctl |= PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
> -		else
> -			plane_color_ctl |= PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
> +		if (!icl_is_hdr_plane(plane)) {
> +			if (plane_state->base.color_encoding ==
> +					DRM_COLOR_YCBCR_BT709)
> +				plane_color_ctl |=
> +					PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
> +			else
> +				plane_color_ctl |=
> +					PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
>  
> -		if (plane_state->base.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
> -			plane_color_ctl |= PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
> +			if (plane_state->base.color_range ==
> +					DRM_COLOR_YCBCR_FULL_RANGE)
> +				plane_color_ctl |=
> +				PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
> +		} else {
> +			icl_program_input_csc_coeff(crtc_state, plane_state);
> +			plane_color_ctl |= PLANE_COLOR_INPUT_CSC_ENABLE;
> +		}
>  	}
>  
>  	return plane_color_ctl;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index db24308..bd9e946 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -2285,6 +2285,8 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_
>  int intel_color_check(struct drm_crtc *crtc, struct drm_crtc_state *state);
>  void intel_color_set_csc(struct drm_crtc_state *crtc_state);
>  void intel_color_load_luts(struct drm_crtc_state *crtc_state);
> +void icl_program_input_csc_coeff(const struct intel_crtc_state *crtc_state,
> +				 const struct intel_plane_state *plane_state);
>  
>  /* intel_lspcon.c */
>  bool lspcon_init(struct intel_digital_port *intel_dig_port);
> -- 
> 1.9.1
> 

-- 
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795


More information about the Intel-gfx mailing list