[Intel-gfx] [PATCH v2 2/2] drm/i915/ICL: Add pre_pll_enable hook for ICL and set DFLEXDPMLE in this hook

[Manasi Navare]

Pushed to dinq, thanks for the patch and reviews

Manasi

On Tue, Oct 23, 2018 at 12:12:48PM -0700, Manasi Navare wrote:
> In case of Legacy DP connector on TypeC port, the
> flex IO DPMLE register is set to number of lanes configured
> by the display driver which will be programmed into DDI_BUF_CTL
> PORT_WIDTH_SELECTION.
> This needs to be programmed before enabling the shared PLLs hence
> add a pre_pll_enable hook for ICL and add this programming in that hook.
> 
> v2:
> * Remove the check for combophy port (Jose)
> * Simplify the port reversal check logic (Jose)
> 
> Cc: Lucas De Marchi <lucas.demarchi at intel.com>
> Cc: Jose Roberto de Souza <jose.souza at intel.com>
> Cc: Animesh Manna <animesh.manna at intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> Reviewed-by: José Roberto de Souza <jose.souza at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c | 49 ++++++++++++++++++++++++++++++++
>  1 file changed, 49 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 6b9742baa5f2..246424605768 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -3311,6 +3311,53 @@ static void bxt_ddi_pre_pll_enable(struct intel_encoder *encoder,
>  	bxt_ddi_phy_set_lane_optim_mask(encoder, mask);
>  }
>  
> +static void intel_ddi_set_fia_lane_count(struct intel_encoder *encoder,
> +					 const struct intel_crtc_state *pipe_config,
> +					 enum port port)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
> +	enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
> +	u32 val = I915_READ(PORT_TX_DFLEXDPMLE1);
> +	bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
> +
> +	val &= ~DFLEXDPMLE1_DPMLETC_MASK(tc_port);
> +	switch (pipe_config->lane_count) {
> +	case 1:
> +		val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3(tc_port) :
> +		DFLEXDPMLE1_DPMLETC_ML0(tc_port);
> +		break;
> +	case 2:
> +		val |= (lane_reversal) ? DFLEXDPMLE1_DPMLETC_ML3_2(tc_port) :
> +		DFLEXDPMLE1_DPMLETC_ML1_0(tc_port);
> +		break;
> +	case 4:
> +		val |= DFLEXDPMLE1_DPMLETC_ML3_0(tc_port);
> +		break;
> +	default:
> +		MISSING_CASE(pipe_config->lane_count);
> +	}
> +	I915_WRITE(PORT_TX_DFLEXDPMLE1, val);
> +}
> +
> +static void icl_ddi_pre_pll_enable(struct intel_encoder *encoder,
> +				   const struct intel_crtc_state *pipe_config,
> +				   const struct drm_connector_state *conn_state)
> +{
> +	enum port port = encoder->port;
> +	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
> +
> +	/*
> +	 * Program the lane count for static/dynamic connections on Type-C ports.
> +	 * Skip this step for TBT.
> +	 */
> +	if (dig_port->tc_type == TC_PORT_UNKNOWN ||
> +	    dig_port->tc_type == TC_PORT_TBT)
> +		return;
> +
> +	intel_ddi_set_fia_lane_count(encoder, pipe_config, port);
> +}
> +
>  void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp)
>  {
>  	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> @@ -3828,6 +3875,8 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>  	intel_encoder->enable = intel_enable_ddi;
>  	if (IS_GEN9_LP(dev_priv))
>  		intel_encoder->pre_pll_enable = bxt_ddi_pre_pll_enable;
> +	if (IS_ICELAKE(dev_priv))
> +		intel_encoder->pre_pll_enable = icl_ddi_pre_pll_enable;
>  	intel_encoder->pre_enable = intel_ddi_pre_enable;
>  	intel_encoder->disable = intel_disable_ddi;
>  	intel_encoder->post_disable = intel_ddi_post_disable;
> -- 
> 2.18.0
>