[Intel-gfx] [PATH i-g-t 13/13] media-bench: Add mixed mode evaluation
Tvrtko Ursulin
tursulin at ursulin.net
Wed Sep 5 13:49:39 UTC 2018
From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Mixed mode (-m) enables evaluation of different workload sets against one
or more load balancing strategies.
Contrary to the default mode which runs all selected workloads serialy,
mixed mode runs a second stage where they are all run in parallel. The
performance difference between the two passes is then used for the scoring
metric.
First metric is the normalized aggregate throughput, and second is
balancer "fairness" as approximated by throughput achieved in mixed mode,
relative to the best individual balancer for each workload.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
---
scripts/media-bench.pl | 150 +++++++++++++++++++++++++++++++++--------
1 file changed, 121 insertions(+), 29 deletions(-)
diff --git a/scripts/media-bench.pl b/scripts/media-bench.pl
index 77e75c78b113..066b542f95df 100755
--- a/scripts/media-bench.pl
+++ b/scripts/media-bench.pl
@@ -41,6 +41,8 @@ my $show_cmds = 0;
my $realtime_target = 0;
my $wps_target = 0;
my $wps_target_param = 0;
+my $multi_mode = 0;
+my @multi_workloads;
my $w_direct;
my $balancer;
my $nop;
@@ -141,6 +143,7 @@ sub run_workload
{
my (@args) = @_;
my ($time, $wps, $cmd);
+ my @ret;
@args = add_wps_arg(@args);
push @args, '-2' if $gt2;
@@ -155,11 +158,13 @@ sub run_workload
if (/^(\d+\.\d+)s elapsed \((\d+\.?\d+) workloads\/s\)$/) {
$time = $1;
$wps = $2;
+ } elsif (/(\d+)\: \d+\.\d+s elapsed \(\d+ cycles, (\d+\.?\d+) workloads\/s\)/) {
+ $ret[$1] = $2;
}
}
close WSIM;
- return ($time, $wps);
+ return ($time, $wps, \@ret);
}
sub dump_cmd
@@ -223,7 +228,11 @@ sub trace_workload
}
close CMD;
- $wrk =~ s/ /_/g;
+ $wrk =~ s/$wrk_root//g;
+ $wrk =~ s/\.wsim//g;
+ $wrk =~ s/-w/W/g;
+ $wrk =~ s/[ -]/_/g;
+ $wrk =~ s/\//-/g;
$b =~ s/[ <>]/_/g;
$file = "${wrk}_${b}_-r${r}_-c${c}";
@@ -259,6 +268,7 @@ sub calibrate_workload
($time, $wps) = run_workload(@args);
+ $wps = $r / $time if $w_direct;
$error = abs($time - $client_target_s) / $client_target_s;
last if $error <= $tol;
@@ -278,13 +288,15 @@ sub calibrate_workload
sub find_saturation_point
{
my ($wrk, $rr, $verbose, @args) = @_;
- my ($last_wps, $c, $swps);
+ my ($last_wps, $c, $swps, $wwps);
my $target = $realtime_target > 0 ? $realtime_target : $wps_target;
my $r = $rr;
my $wcnt;
my $maxc;
my $max = 0;
+ push @args, '-v' if $multi_mode and $w_direct;
+
if (defined $w_direct) {
push @args, split /\s+/, $wrk;
$wcnt = () = $wrk =~ /-[wW]/gi;
@@ -297,8 +309,9 @@ sub find_saturation_point
for ($c = 1; ; $c = $c + 1) {
my ($time, $wps);
+ my @args_ = (@args, ('-r', $r, '-c', $c));
- ($time, $wps) = run_workload((@args, ('-r', $r, '-c', $c)));
+ ($time, $wps, $wwps) = run_workload(@args_);
say " $c clients is $wps wps." if $verbose;
@@ -324,21 +337,23 @@ sub find_saturation_point
$r = int($rr * ($client_target_s / $time));
} elsif ($c == 1) {
$swps = $wps;
- return ($c, $wps, $swps) if $wcnt > 1 or
- ($wps_target_param < 0 and $wps_target == 0);
+ return ($c, $wps, $swps, $wwps) if $wcnt > 1 or
+ $multi_mode or
+ ($wps_target_param < 0 and
+ $wps_target == 0);
}
$last_wps = $wps;
}
if ($target <= 0) {
- return ($maxc, $max, $swps);
+ return ($maxc, $max, $swps, $wwps);
} else {
- return ($c - 1, $last_wps, $swps);
+ return ($c - 1, $last_wps, $swps, $wwps);
}
}
-getopts('hv2xn:b:W:B:r:t:i:R:T:w:', \%opts);
+getopts('hv2xmn:b:W:B:r:t:i:R:T:w:', \%opts);
if (defined $opts{'h'}) {
print <<ENDHELP;
@@ -360,8 +375,11 @@ Supported options:
-R wps Run workloads in the real-time mode at wps rate.
-T wps Calibrate up to wps/client target instead of GPU saturation.
Negative values set the target based on the single client
- performance where target = single-client-wps / -N.
+ performance where target = single-client-wps / -N.
-w str Pass-through to gem_wsim. Overrides normal workload selection.
+ -m Multi-workload mode. All selected workloads will be run in
+ parallel and overal score will be relative to when run
+ individually.
ENDHELP
exit 0;
}
@@ -369,6 +387,7 @@ ENDHELP
$verbose = 1 if defined $opts{'v'};
$gt2 = 1 if defined $opts{'2'};
$show_cmds = 1 if defined $opts{'x'};
+$multi_mode = 1 if defined $opts{'m'};
if (defined $opts{'b'}) {
die unless substr($opts{'b'}, 0, 2) eq '-b';
$balancer = $opts{'b'};
@@ -387,7 +406,13 @@ $wps_target = $opts{'T'} if defined $opts{'T'};
$wps_target_param = $wps_target;
$w_direct = $opts{'w'} if defined $opts{'w'};
- at workloads = ($w_direct ) if defined $w_direct;
+if ($multi_mode) {
+ die if $w_direct; # Not supported
+ @multi_workloads = @workloads;
+}
+
+ at workloads = ($w_direct) if defined $w_direct;
+
say "Workloads:";
print map { " $_\n" } @workloads;
print "Balancers: ";
@@ -396,13 +421,14 @@ say "Target workload duration is ${client_target_s}s.";
say "Calibration tolerance is $tolerance.";
say "Real-time mode at ${realtime_target} wps." if $realtime_target > 0;
say "Wps target is ${wps_target} wps." if $wps_target > 0;
+say "Multi-workload mode." if $multi_mode;
$nop = $opts{'n'};
$nop = calibrate_nop() unless $nop;
say "Nop calibration is $nop.";
goto VERIFY if defined $balancer;
-my %best_bal;
+my (%best_bal, %best_bid);
my %results;
my %scores;
my %wscores;
@@ -438,13 +464,22 @@ sub add_points
}
}
-foreach my $wrk (@workloads) {
+my @saturation_workloads = $multi_mode ? @multi_workloads : @workloads;
+my %allwps;
+my $widx = 0;
+
+push @saturation_workloads, '-w ' . join ' -w ', map("$wrk_root/$_", @workloads)
+ if $multi_mode;
+
+foreach my $wrk (@saturation_workloads) {
my @args = ( "-n $nop");
my ($r, $error, $should_b, $best);
my (%wps, %cwps, %mwps);
my @sorted;
my $range;
+ $w_direct = $wrk if $multi_mode and $widx == $#saturation_workloads;
+
$should_b = 1;
$should_b = can_balance_workload($wrk) unless defined $w_direct;
@@ -459,7 +494,7 @@ foreach my $wrk (@workloads) {
GBAL: foreach my $G ('', '-G', '-d', '-G -d') {
foreach my $H ('', '-H') {
my @xargs;
- my ($w, $c, $s);
+ my ($w, $c, $s, $bwwps);
my $bid;
if ($bal ne '') {
@@ -476,21 +511,67 @@ foreach my $wrk (@workloads) {
$wps_target = 0 if $wps_target_param < 0;
- ($c, $w, $s) = find_saturation_point($wrk, $r,
- 0,
- (@args,
- @xargs));
+ ($c, $w, $s, $bwwps) =
+ find_saturation_point($wrk, $r, 0,
+ (@args, @xargs));
if ($wps_target_param < 0) {
$wps_target = $s / -$wps_target_param;
- ($c, $w, $s) =
+ ($c, $w, $s, $bwwps) =
find_saturation_point($wrk, $r,
0,
(@args,
@xargs));
}
+ if ($multi_mode and $w_direct) {
+ my $widx;
+
+ die unless scalar(@multi_workloads) ==
+ scalar(@{$bwwps});
+ die unless scalar(@multi_workloads) ==
+ scalar(keys %allwps);
+
+ # Total of all workload wps from the
+ # mixed run.
+ $w = 0;
+ foreach $widx (0..$#{$bwwps}) {
+ $w += $bwwps->[$widx];
+ }
+
+ # Total of all workload wps from when
+ # ran individually with the best
+ # balancer.
+ my $tot = 0;
+ foreach my $wrk (@multi_workloads) {
+ $tot += $allwps{$wrk}->{$best_bid{$wrk}};
+ }
+
+ # Normalize mixed sum with sum of
+ # individual runs.
+ $w *= 100;
+ $w /= $tot;
+
+ # Second metric is average of each
+ # workload wps normalized by their
+ # individual run performance with the
+ # best balancer.
+ $s = 0;
+ $widx = 0;
+ foreach my $wrk (@multi_workloads) {
+ $s += 100 * $bwwps->[$widx] /
+ $allwps{$wrk}->{$best_bid{$wrk}};
+ $widx++;
+ }
+ $s /= scalar(@multi_workloads);
+
+ say sprintf('Aggregate (normalized) %.2f%%; fairness %.2f%%',
+ $w, $s);
+ } else {
+ $allwps{$wrk} = \%wps;
+ }
+
$wps{$bid} = $w;
$cwps{$bid} = $s;
@@ -500,7 +581,8 @@ foreach my $wrk (@workloads) {
$mwps{$bid} = $w + $s;
}
- say "$c clients ($w wps, $s wps single client, score=$mwps{$bid}).";
+ say "$c clients ($w wps, $s wps single client, score=$mwps{$bid})."
+ unless $multi_mode and $w_direct;
last BAL unless $should_b;
next BAL if $bal eq '';
@@ -509,19 +591,24 @@ foreach my $wrk (@workloads) {
}
}
+ $widx++;
+
@sorted = sort { $mwps{$b} <=> $mwps{$a} } keys %mwps;
- $best = $sorted[0];
+ $best_bid{$wrk} = $sorted[0];
@sorted = sort { $b <=> $a } values %mwps;
$range = 1 - $sorted[-1] / $sorted[0];
$best_bal{$wrk} = $sorted[0];
- say " Best balancer is '$best' (range=$range).";
+
+ next if $multi_mode and not $w_direct;
+
+ say " Best balancer is '$best_bid{$wrk}' (range=$range).";
$results{$wrk} = \%mwps;
add_points(\%wps, \%scores, \%wscores);
- add_points(\%cwps, \%cscores, \%cwscores);
add_points(\%mwps, \%mscores, \%mwscores);
+ add_points(\%cwps, \%cscores, \%cwscores);
}
sub dump_scoreboard
@@ -552,12 +639,12 @@ sub dump_scoreboard
return $balancer;
}
-dump_scoreboard('Total wps', \%scores);
-dump_scoreboard('Total weighted wps', \%wscores);
-dump_scoreboard('Per client wps', \%cscores);
-dump_scoreboard('Per client weighted wps', \%cwscores);
-dump_scoreboard('Combined wps', \%mscores);
-$balancer = dump_scoreboard('Combined weighted wps', \%mwscores);
+dump_scoreboard($multi_mode ? 'Throughput' : 'Total wps', \%scores);
+dump_scoreboard('Total weighted wps', \%wscores) unless $multi_mode;
+dump_scoreboard($multi_mode ? 'Fairness' : 'Per client wps', \%cscores);
+dump_scoreboard('Per client weighted wps', \%cwscores) unless $multi_mode;
+$balancer = dump_scoreboard($multi_mode ? 'Combined' : 'Combined wps', \%mscores);
+$balancer = dump_scoreboard('Combined weighted wps', \%mwscores) unless $multi_mode;
VERIFY:
@@ -568,6 +655,11 @@ die unless defined $balancer;
say "\nBalancer is '$balancer'.";
say "Idleness tolerance is $idle_tolerance_pct%.";
+if ($multi_mode) {
+ $w_direct = '-w ' . join ' -w ', map("$wrk_root/$_", @workloads);
+ @workloads = ($w_direct);
+}
+
foreach my $wrk (@workloads) {
my @args = ( "-n $nop" );
my ($r, $error, $c, $wps, $swps);
--
2.17.1
More information about the Intel-gfx
mailing list