[Intel-gfx] [PATCH] drm/i915/psr: Enable AUX-A IO power well on ICL for PSR

[Souza, Jose]

On Thu, 2018-09-13 at 17:18 -0700, Dhinakaran Pandiyan wrote:
> PSR requires AUX IO power well to be enabled. This was already in
> place
> for CNL, extend this for ICL too. Not enabling the power well results
> in
> the aux error interrupts when the hardware exits PSR.
> 

Reviewed-by: José Roberto de Souza <jose.souza at intel.com>

> Reported-by: Casey G Bowman <casey.g.bowman at intel.com>
> Reported-by: Jyoti R Yadav <jyoti.r.yadav at intel.com>
> Cc: Matt Atwood <matthew.s.atwood at intel.com>
> Cc: Jyoti R Yadav <jyoti.r.yadav at intel.com>
> Cc: Casey G Bowman <casey.g.bowman at intel.com>
> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c        | 2 +-
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 1 +
>  2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index cd01a09c5e0f..b6910c8b4e08 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -2077,7 +2077,7 @@ bool intel_ddi_get_hw_state(struct
> intel_encoder *encoder,
>  static inline enum intel_display_power_domain
>  intel_ddi_main_link_aux_domain(struct intel_dp *intel_dp)
>  {
> -	/* CNL HW requires corresponding AUX IOs to be powered up for
> PSR with
> +	/* CNL+ HW requires corresponding AUX IOs to be powered up for
> PSR with
>  	 * DC states enabled at the same time, while for driver
> initiated AUX
>  	 * transfers we need the same AUX IOs to be powered but with DC
> states
>  	 * disabled. Accordingly use the AUX power domain here which
> leaves DC
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c
> b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 9bebec389de1..0fdabce647ab 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -1996,6 +1996,7 @@ void intel_display_power_put(struct
> drm_i915_private *dev_priv,
>  	BIT_ULL(POWER_DOMAIN_PORT_DDI_F_IO))
>  
>  #define ICL_AUX_A_IO_POWER_DOMAINS (			\
> +	BIT_ULL(POWER_DOMAIN_AUX_IO_A) |		\
>  	BIT_ULL(POWER_DOMAIN_AUX_A))
>  #define ICL_AUX_B_IO_POWER_DOMAINS (			\
>  	BIT_ULL(POWER_DOMAIN_AUX_B))