[Intel-gfx] [RFC 3/3] drm/i915/icl: Calculate DPLL params for DSI

[Kulkarni, Vandita]

> -----Original Message-----
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Sent: Friday, September 14, 2018 9:39 PM
> To: Kulkarni, Vandita <vandita.kulkarni at intel.com>
> Cc: intel-gfx at lists.freedesktop.org; Nikula, Jani <jani.nikula at intel.com>;
> Zanoni, Paulo R <paulo.r.zanoni at intel.com>
> Subject: Re: [Intel-gfx] [RFC 3/3] drm/i915/icl: Calculate DPLL params for DSI
> 
> On Fri, Sep 14, 2018 at 12:24:14PM +0530, Vandita Kulkarni wrote:
> > From: Madhav Chauhan <madhav.chauhan at intel.com>
> >
> > This patch calculate various DPLL dividers and parameters for DSI
> > encoder and adjust AFE clock for DSI. For DSI, 8x clock is AFE clock.
> >
> > v2: Extend haswell_crtc_compute_clock() for Gen11 DSI
> > v3: Rebase
> >
> > Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
> > Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_display.c  | 4 +++-
> > drivers/gpu/drm/i915/intel_dpll_mgr.c | 7 ++++++-
> >  2 files changed, 9 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index 6928dcc..1a44c5e 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -9238,10 +9238,12 @@ void hsw_disable_pc8(struct drm_i915_private
> > *dev_priv)  static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
> >  				      struct intel_crtc_state *crtc_state)  {
> > +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> >  	struct intel_atomic_state *state =
> >  		to_intel_atomic_state(crtc_state->base.state);
> >
> > -	if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI)) {
> > +	if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) ||
> > +				 IS_ICELAKE(dev_priv)) {
> >  		struct intel_encoder *encoder =
> >  			intel_get_crtc_new_encoder(state, crtc_state);
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > index 36ed155..5175e44 100644
> > --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > @@ -22,6 +22,7 @@
> >   */
> >
> >  #include "intel_drv.h"
> > +#include "intel_dsi.h"
> >
> >  /**
> >   * DOC: Display PLLs
> > @@ -2532,7 +2533,11 @@ static bool icl_calc_dpll_state(struct
> intel_crtc_state *crtc_state,
> >  		ret = icl_calc_tbt_pll(dev_priv, clock, &pll_params);
> >  	else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
> >  		ret = cnl_ddi_calculate_wrpll(clock, dev_priv, &pll_params);
> > -	else
> > +	else if (encoder->type == INTEL_OUTPUT_DSI) {
> > +		struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> > +		ret = cnl_ddi_calculate_wrpll(intel_dsi->bitrate_khz/5,
> 
> Missing port_clock=whatever in compute config?
As per the spec I see that for mipi dsi on icl,
8x clock = AFE clock.
And 8x clock is calculated and stored already as pixel_clk * bpp / lane_count
Hence we are using already calculate 8x clock variable here and divide by/5 because later in the function it
gets multiplied by 5 for afe clock.

port_clock is assigned to pixel clock as I see. 
Please let me know if we have to use math around the port clock and pass that value, than passing 8x clock.

Thanks,
Vandita
> 
> > +					      dev_priv, &pll_params);
> > +	} else
> >  		ret = icl_calc_dp_combo_pll(dev_priv, clock, &pll_params);
> >
> >  	if (!ret)
> > --
> > 1.9.1
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> --
> Ville Syrjälä
> Intel