[Intel-gfx] [PATCH] drm/i915: Clean up scaler setup, v2.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Fri Sep 21 17:32:12 UTC 2018
Op 21-09-18 om 18:40 schreef Matt Roper:
> On Fri, Sep 21, 2018 at 04:44:37PM +0200, Maarten Lankhorst wrote:
>> On skylake we can switch to a high quality scaler mode when only 1 out
>> of 2 scalers are used, but on GLK and later bit 28 has a different
>> meaning. Don't set it, and make clear the distinction between
>> SKL and later PS values.
>>
>> Changes since v1:
>> - Add missing break statement.
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>> Reviewed-by: Matt Roper <matthew.d.roper at intel.com> #v1
> R-b for v2 as well.
>
>> ---
>> drivers/gpu/drm/i915/i915_reg.h | 7 +-
>> drivers/gpu/drm/i915/intel_atomic.c | 109 +++++++++++++++------------
>> drivers/gpu/drm/i915/intel_display.c | 2 +-
>> 3 files changed, 67 insertions(+), 51 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> index 4948b352bf4c..e7e6ca7f9665 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -6850,11 +6850,12 @@ enum {
>> #define _PS_2B_CTRL 0x68A80
>> #define _PS_1C_CTRL 0x69180
>> #define PS_SCALER_EN (1 << 31)
>> -#define PS_SCALER_MODE_MASK (3 << 28)
>> -#define PS_SCALER_MODE_DYN (0 << 28)
>> -#define PS_SCALER_MODE_HQ (1 << 28)
>> +#define SKL_PS_SCALER_MODE_MASK (3 << 28)
>> +#define SKL_PS_SCALER_MODE_DYN (0 << 28)
>> +#define SKL_PS_SCALER_MODE_HQ (1 << 28)
>> #define SKL_PS_SCALER_MODE_NV12 (2 << 28)
>> #define PS_SCALER_MODE_PLANAR (1 << 29)
>> +#define PS_SCALER_MODE_PACKED (0 << 29)
>> #define PS_PLANE_SEL_MASK (7 << 25)
>> #define PS_PLANE_SEL(plane) (((plane) + 1) << 25)
>> #define PS_FILTER_MASK (3 << 23)
>> diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
>> index b04952bacf77..c23a6ec40f60 100644
>> --- a/drivers/gpu/drm/i915/intel_atomic.c
>> +++ b/drivers/gpu/drm/i915/intel_atomic.c
>> @@ -203,6 +203,63 @@ intel_crtc_destroy_state(struct drm_crtc *crtc,
>> drm_atomic_helper_crtc_destroy_state(crtc, state);
>> }
>>
>> +static void intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_state,
>> + int num_scalers_need, struct intel_crtc *intel_crtc,
>> + const char *name, int idx,
>> + struct intel_plane_state *plane_state,
>> + int *scaler_id)
>> +{
>> + struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
>> + int j;
>> + u32 mode;
>> +
>> + if (*scaler_id < 0) {
>> + /* find a free scaler */
>> + for (j = 0; j < intel_crtc->num_scalers; j++) {
>> + if (scaler_state->scalers[j].in_use)
>> + continue;
>> +
>> + *scaler_id = j;
>> + scaler_state->scalers[*scaler_id].in_use = 1;
>> + break;
>> + }
>> + }
>> +
>> + if (WARN(*scaler_id < 0, "Cannot find scaler for %s:%d\n", name, idx))
>> + return;
>> +
>> + /* set scaler mode */
>> + if (plane_state && plane_state->base.fb &&
>> + plane_state->base.fb->format->is_yuv &&
>> + plane_state->base.fb->format->num_planes > 1) {
>> + if (INTEL_GEN(dev_priv) == 9 &&
>> + !IS_GEMINILAKE(dev_priv))
>> + mode = SKL_PS_SCALER_MODE_NV12;
>> + else
>> + mode = PS_SCALER_MODE_PLANAR;
>> +
>> + } else if (INTEL_GEN(dev_priv) > 9 || IS_GEMINILAKE(dev_priv)) {
>> + mode = PS_SCALER_MODE_PACKED;
>> + } else if (num_scalers_need == 1 && intel_crtc->num_scalers > 1) {
>> + /*
>> + * when only 1 scaler is in use on a pipe with 2 scalers
>> + * scaler 0 operates in high quality (HQ) mode.
>> + * In this case use scaler 0 to take advantage of HQ mode
>> + */
>> + scaler_state->scalers[*scaler_id].in_use = 0;
>> + *scaler_id = 0;
>> + scaler_state->scalers[0].in_use = 1;
>> + mode = SKL_PS_SCALER_MODE_HQ;
>> + } else {
>> + mode = SKL_PS_SCALER_MODE_DYN;
>> + }
>> +
>> + DRM_DEBUG_KMS("Attached scaler id %u.%u to %s:%d\n",
>> + intel_crtc->pipe, *scaler_id, name, idx);
>> + scaler_state->scalers[*scaler_id].mode = mode;
>> +}
>> +
>> +
>> /**
>> * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests
>> * @dev_priv: i915 device
>> @@ -232,7 +289,7 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
>> struct drm_atomic_state *drm_state = crtc_state->base.state;
>> struct intel_atomic_state *intel_state = to_intel_atomic_state(drm_state);
>> int num_scalers_need;
>> - int i, j;
>> + int i;
>>
>> num_scalers_need = hweight32(scaler_state->scaler_users);
>>
>> @@ -304,59 +361,17 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
>> idx = plane->base.id;
>>
>> /* plane on different crtc cannot be a scaler user of this crtc */
>> - if (WARN_ON(intel_plane->pipe != intel_crtc->pipe)) {
>> + if (WARN_ON(intel_plane->pipe != intel_crtc->pipe))
>> continue;
>> - }
>>
>> plane_state = intel_atomic_get_new_plane_state(intel_state,
>> intel_plane);
>> scaler_id = &plane_state->scaler_id;
>> }
>>
>> - if (*scaler_id < 0) {
>> - /* find a free scaler */
>> - for (j = 0; j < intel_crtc->num_scalers; j++) {
>> - if (!scaler_state->scalers[j].in_use) {
>> - scaler_state->scalers[j].in_use = 1;
>> - *scaler_id = j;
>> - DRM_DEBUG_KMS("Attached scaler id %u.%u to %s:%d\n",
>> - intel_crtc->pipe, *scaler_id, name, idx);
>> - break;
>> - }
>> - }
>> - }
>> -
>> - if (WARN_ON(*scaler_id < 0)) {
>> - DRM_DEBUG_KMS("Cannot find scaler for %s:%d\n", name, idx);
>> - continue;
>> - }
>> -
>> - /* set scaler mode */
>> - if ((INTEL_GEN(dev_priv) >= 9) &&
>> - plane_state && plane_state->base.fb &&
>> - plane_state->base.fb->format->format ==
>> - DRM_FORMAT_NV12) {
>> - if (INTEL_GEN(dev_priv) == 9 &&
>> - !IS_GEMINILAKE(dev_priv) &&
>> - !IS_SKYLAKE(dev_priv))
>> - scaler_state->scalers[*scaler_id].mode =
>> - SKL_PS_SCALER_MODE_NV12;
>> - else
>> - scaler_state->scalers[*scaler_id].mode =
>> - PS_SCALER_MODE_PLANAR;
>> - } else if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
>> - /*
>> - * when only 1 scaler is in use on either pipe A or B,
>> - * scaler 0 operates in high quality (HQ) mode.
>> - * In this case use scaler 0 to take advantage of HQ mode
>> - */
>> - *scaler_id = 0;
>> - scaler_state->scalers[0].in_use = 1;
>> - scaler_state->scalers[0].mode = PS_SCALER_MODE_HQ;
>> - scaler_state->scalers[1].in_use = 0;
>> - } else {
>> - scaler_state->scalers[*scaler_id].mode = PS_SCALER_MODE_DYN;
>> - }
>> + intel_atomic_setup_scaler(scaler_state, num_scalers_need,
>> + intel_crtc, name, idx,
>> + plane_state, scaler_id);
>> }
>>
>> return 0;
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 02374185b993..931898013506 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -13963,7 +13963,7 @@ static void intel_crtc_init_scalers(struct intel_crtc *crtc,
>> struct intel_scaler *scaler = &scaler_state->scalers[i];
>>
>> scaler->in_use = 0;
>> - scaler->mode = PS_SCALER_MODE_DYN;
>> + scaler->mode = 0;
>> }
>>
>> scaler_state->scaler_id = -1;
>> --
>> 2.18.0
>>
Thanks, pushed the series. :)
~Maarten
More information about the Intel-gfx
mailing list