[Intel-gfx] [PATCH 5/7] drm/i915/gen11: Program the chroma upsampler for HDR planes.

[Maarten Lankhorst]

We configure the chroma upsampler with the same chroma siting as
used by the scaler for consistency, the chroma upsampler is used
instead of the scaler for YUV 4:2:0 on ICL's HDR planes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h     | 22 ++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_sprite.c | 22 ++++++++++++++++++++++
 2 files changed, 44 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 1b59d15aaf59..b614a06b66c4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6560,6 +6560,19 @@ enum {
 #define _PLANE_AUX_DIST_2_A			0x702c0
 #define _PLANE_AUX_OFFSET_1_A			0x701c4
 #define _PLANE_AUX_OFFSET_2_A			0x702c4
+#define _PLANE_CUS_CTL_1_A			0x701c8
+#define _PLANE_CUS_CTL_2_A			0x702c8
+#define  PLANE_CUS_ENABLE			(1 << 31)
+#define  PLANE_CUS_PLANE_6			(0 << 30)
+#define  PLANE_CUS_PLANE_7			(1 << 30)
+#define  PLANE_CUS_HPHASE_SIGN_NEGATIVE		(1 << 19)
+#define  PLANE_CUS_HPHASE_0			(0 << 16)
+#define  PLANE_CUS_HPHASE_0_25			(1 << 16)
+#define  PLANE_CUS_HPHASE_0_5			(2 << 16)
+#define  PLANE_CUS_VPHASE_SIGN_NEGATIVE		(1 << 15)
+#define  PLANE_CUS_VPHASE_0			(0 << 12)
+#define  PLANE_CUS_VPHASE_0_25			(1 << 12)
+#define  PLANE_CUS_VPHASE_0_5			(2 << 12)
 #define _PLANE_COLOR_CTL_1_A			0x701CC /* GLK+ */
 #define _PLANE_COLOR_CTL_2_A			0x702CC /* GLK+ */
 #define _PLANE_COLOR_CTL_3_A			0x703CC /* GLK+ */
@@ -6697,6 +6710,15 @@ enum {
 #define PLANE_AUX_OFFSET(pipe, plane)   \
 	_MMIO_PLANE(plane, _PLANE_AUX_OFFSET_1(pipe), _PLANE_AUX_OFFSET_2(pipe))
 
+#define _PLANE_CUS_CTL_1_B		0x711c8
+#define _PLANE_CUS_CTL_2_B		0x712c8
+#define _PLANE_CUS_CTL_1(pipe)       \
+		_PIPE(pipe, _PLANE_CUS_CTL_1_A, _PLANE_CUS_CTL_1_B)
+#define _PLANE_CUS_CTL_2(pipe)       \
+		_PIPE(pipe, _PLANE_CUS_CTL_2_A, _PLANE_CUS_CTL_2_B)
+#define PLANE_CUS_CTL(pipe, plane)   \
+	_MMIO_PLANE(plane, _PLANE_CUS_CTL_1(pipe), _PLANE_CUS_CTL_2(pipe))
+
 #define _PLANE_COLOR_CTL_1_B			0x711CC
 #define _PLANE_COLOR_CTL_2_B			0x712CC
 #define _PLANE_COLOR_CTL_3_B			0x713CC
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 111d72a5d5a0..c4e05b0b60bf 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -358,6 +358,7 @@ skl_update_plane(struct intel_plane *plane,
 	uint32_t y = plane_state->color_plane[0].y;
 	uint32_t src_w = drm_rect_width(&plane_state->base.src) >> 16;
 	uint32_t src_h = drm_rect_height(&plane_state->base.src) >> 16;
+	struct intel_plane *linked = plane_state->linked_plane;
 	unsigned long irqflags;
 
 	/* Sizes are 0 based */
@@ -385,6 +386,27 @@ skl_update_plane(struct intel_plane *plane,
 		      (plane_state->color_plane[1].y << 16) |
 		      plane_state->color_plane[1].x);
 
+	if (icl_is_hdr_plane(plane)) {
+		u32 cus_ctl = 0;
+
+		if (linked) {
+			/* Enable and use MPEG-2 chroma siting */
+			cus_ctl = PLANE_CUS_ENABLE |
+				PLANE_CUS_HPHASE_0 |
+				PLANE_CUS_VPHASE_SIGN_NEGATIVE |
+				PLANE_CUS_VPHASE_0_25;
+
+			if (linked->id == PLANE_SPRITE5)
+				cus_ctl |= PLANE_CUS_PLANE_7;
+			else if (linked->id == PLANE_SPRITE4)
+				cus_ctl |= PLANE_CUS_PLANE_6;
+			else
+				MISSING_CASE(linked->id);
+		}
+
+		I915_WRITE_FW(PLANE_CUS_CTL(pipe, plane_id), cus_ctl);
+	}
+
 	/* program plane scaler */
 	if (plane_state->scaler_id >= 0) {
 		skl_program_scaler(dev_priv, plane, crtc_state, plane_state);
-- 
2.18.0