[Intel-gfx] [PATCH 1/3] drm/i915: Fix pipe config timing mismatch warnings

[Ville Syrjälä]

On Thu, Apr 04, 2019 at 01:36:25PM +0530, Vandita Kulkarni wrote:
> Mipi dsi programs the transcoder timings as part of
> encoder enable sequence, with dual link or single link
> in consideration. Hence add get transcoder timings as
> part of the encoder's get_config function.
> 
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
> ---
>  drivers/gpu/drm/i915/icl_dsi.c       | 51 ++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_display.c |  3 ++-
>  2 files changed, 53 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
> index b67ffaa..db6bc3d 100644
> --- a/drivers/gpu/drm/i915/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/icl_dsi.c
> @@ -1176,6 +1176,56 @@ static void gen11_dsi_disable(struct intel_encoder *encoder,
>  	gen11_dsi_disable_io_power(encoder);
>  }
>  
> +static void gen11_dsi_get_timings(struct intel_encoder *encoder,
> +				  struct intel_crtc_state *pipe_config)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> +	struct drm_display_mode *adjusted_mode =
> +					&pipe_config->base.adjusted_mode;
> +	/* get config for dsi0 transcoder only */
> +	enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
> +	/* horizontal timings */
> +	u16 htotal, hactive, hsync_start, hsync_end;
> +	u32 tmp;
> +
> +	tmp =  I915_READ(HTOTAL(cpu_transcoder));
> +	hactive = (tmp & 0xffff) + 1;
> +	htotal = ((tmp >> 16) & 0xffff) + 1;
> +	if (intel_dsi->dual_link) {
> +		hactive *= 2;
> +		if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
> +			hactive -= intel_dsi->pixel_overlap;
> +		htotal *= 2;
> +	}
> +	adjusted_mode->crtc_hdisplay = hactive;
> +	adjusted_mode->crtc_htotal = htotal;
> +	adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay;
> +	adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal;
> +
> +	tmp = I915_READ(HSYNC(cpu_transcoder));
> +	hsync_start = (tmp & 0xffff) + 1;
> +	hsync_end = ((tmp >> 16) & 0xffff) + 1;
> +	if (intel_dsi->operation_mode == INTEL_DSI_VIDEO_MODE) {
> +		if (intel_dsi->dual_link) {
> +			hsync_start *= 2;
> +			hsync_end *= 2;
> +		}
> +	}

This looks like a hand rolled intel_get_pipe_timings() with an
extra twist. I would suggest trying to reuse intel_get_pipe_timings()
and just adjusting what it gave you a bit.

-- 
Ville Syrjälä
Intel