[Intel-gfx] [PATCH 09/10] drm/i915: Merge sandybridge_pcode_(read|write)
Chris Wilson
chris at chris-wilson.co.uk
Fri Apr 19 17:14:01 UTC 2019
These routines are identical except in the nature of the value parameter.
For writes it is a pure in-param, but for a read, we need an out-param.
Since they differ in a single line, merge the two routines into one.
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak at intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 115 +++++++++++---------------------
1 file changed, 40 insertions(+), 75 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 9a810d0683f7..c9a321aa5d26 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -9714,12 +9714,10 @@ void intel_init_pm(struct drm_i915_private *dev_priv)
}
}
-static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv)
+static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv,
+ u32 mbox)
{
- u32 flags =
- I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
-
- switch (flags) {
+ switch (mbox & GEN6_PCODE_ERROR_MASK) {
case GEN6_PCODE_SUCCESS:
return 0;
case GEN6_PCODE_UNIMPLEMENTED_CMD:
@@ -9732,17 +9730,15 @@ static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv)
case GEN6_PCODE_TIMEOUT:
return -ETIMEDOUT;
default:
- MISSING_CASE(flags);
+ MISSING_CASE(mbox & GEN6_PCODE_ERROR_MASK);
return 0;
}
}
-static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv)
+static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv,
+ u32 mbox)
{
- u32 flags =
- I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
-
- switch (flags) {
+ switch (mbox & GEN6_PCODE_ERROR_MASK) {
case GEN6_PCODE_SUCCESS:
return 0;
case GEN6_PCODE_ILLEGAL_CMD:
@@ -9754,19 +9750,21 @@ static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv)
case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
return -EOVERFLOW;
default:
- MISSING_CASE(flags);
+ MISSING_CASE(mbox & GEN6_PCODE_ERROR_MASK);
return 0;
}
}
-static int
-__sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val)
+static int __sandybridge_pcode_rw(struct drm_i915_private *dev_priv,
+ u32 mbox, u32 *val,
+ int fast_timeout_us,
+ int slow_timeout_ms,
+ bool is_read)
{
- int status;
-
lockdep_assert_held(&dev_priv->sb_lock);
- /* GEN6_PCODE_* are outside of the forcewake domain, we can
+ /*
+ * GEN6_PCODE_* are outside of the forcewake domain, we can
* use te fw I915_READ variants to reduce the amount of work
* required when reading/writing.
*/
@@ -9780,70 +9778,37 @@ __sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val)
if (__intel_wait_for_register_fw(&dev_priv->uncore,
GEN6_PCODE_MAILBOX, GEN6_PCODE_READY, 0,
- 500, 0, NULL))
+ fast_timeout_us,
+ slow_timeout_ms,
+ &mbox))
return -ETIMEDOUT;
- *val = I915_READ_FW(GEN6_PCODE_DATA);
- I915_WRITE_FW(GEN6_PCODE_DATA, 0);
+ if (is_read)
+ *val = I915_READ_FW(GEN6_PCODE_DATA);
if (INTEL_GEN(dev_priv) > 6)
- status = gen7_check_mailbox_status(dev_priv);
+ return gen7_check_mailbox_status(dev_priv, mbox);
else
- status = gen6_check_mailbox_status(dev_priv);
-
- return status;
+ return gen6_check_mailbox_status(dev_priv, mbox);
}
int
sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val)
{
- int status;
+ int err;
mutex_lock(&dev_priv->sb_lock);
- status = __sandybridge_pcode_read(dev_priv, mbox, val);
+ err = __sandybridge_pcode_rw(dev_priv, mbox, val,
+ 500, 0,
+ true);
mutex_unlock(&dev_priv->sb_lock);
- if (status) {
+ if (err) {
DRM_DEBUG_DRIVER("warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
- mbox, __builtin_return_address(0), status);
+ mbox, __builtin_return_address(0), err);
}
- return status;
-}
-
-static int __sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv,
- u32 mbox, u32 val,
- int fast_timeout_us,
- int slow_timeout_ms)
-{
- int status;
-
- /* GEN6_PCODE_* are outside of the forcewake domain, we can
- * use te fw I915_READ variants to reduce the amount of work
- * required when reading/writing.
- */
-
- if (I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY)
- return -EAGAIN;
-
- I915_WRITE_FW(GEN6_PCODE_DATA, val);
- I915_WRITE_FW(GEN6_PCODE_DATA1, 0);
- I915_WRITE_FW(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
-
- if (__intel_wait_for_register_fw(&dev_priv->uncore,
- GEN6_PCODE_MAILBOX, GEN6_PCODE_READY, 0,
- fast_timeout_us, slow_timeout_ms,
- NULL))
- return -ETIMEDOUT;
-
- I915_WRITE_FW(GEN6_PCODE_DATA, 0);
-
- if (INTEL_GEN(dev_priv) > 6)
- status = gen7_check_mailbox_status(dev_priv);
- else
- status = gen6_check_mailbox_status(dev_priv);
-
- return status;
+ return err;
}
int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv,
@@ -9851,31 +9816,31 @@ int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv,
int fast_timeout_us,
int slow_timeout_ms)
{
- int status;
+ int err;
mutex_lock(&dev_priv->sb_lock);
- status = __sandybridge_pcode_write_timeout(dev_priv, mbox, val,
- fast_timeout_us,
- slow_timeout_ms);
+ err = __sandybridge_pcode_rw(dev_priv, mbox, &val,
+ fast_timeout_us, slow_timeout_ms,
+ false);
mutex_unlock(&dev_priv->sb_lock);
- if (status) {
+ if (err) {
DRM_DEBUG_DRIVER("warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
- val, mbox, __builtin_return_address(0), status);
+ val, mbox, __builtin_return_address(0), err);
}
- return status;
+ return err;
}
static bool skl_pcode_try_request(struct drm_i915_private *dev_priv, u32 mbox,
u32 request, u32 reply_mask, u32 reply,
u32 *status)
{
- u32 val = request;
-
- *status = __sandybridge_pcode_read(dev_priv, mbox, &val);
+ *status = __sandybridge_pcode_rw(dev_priv, mbox, &request,
+ 500, 0,
+ true);
- return *status || ((val & reply_mask) == reply);
+ return *status || ((request & reply_mask) == reply);
}
/**
--
2.20.1
More information about the Intel-gfx
mailing list