[Intel-gfx] [PATCH v5 11/12] drm: Add CP downstream_info property
Ramalingam C
ramalingam.c at intel.com
Mon Apr 29 14:46:13 UTC 2019
On 2019-04-29 at 09:38:32 +0200, Daniel Vetter wrote:
> On Thu, Apr 18, 2019 at 02:28:04PM +0530, Ramalingam C wrote:
> > This patch adds a optional CP downstream info blob property to the
> > connectors. This enables the Userspace to read the information of HDCP
> > authenticated downstream topology.
> >
> > Driver will update this blob with all downstream information at the
> > end of the authentication.
> >
> > In case userspace configures this platform as repeater, then this
> > information is needed for the authentication with upstream HDCP
> > transmitter.
> >
> > v2:
> > s/cp_downstream/content_protection_downstream [daniel]
> > v3:
> > s/content_protection_downstream/hdcp_topology [daniel]
> > v4:
> > hdcp_topology_info struct is added with explicit padding [Daniel]
> > v5:
> > Rebased.
> >
> > Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
> > ---
> > drivers/gpu/drm/drm_atomic_uapi.c | 3 ++
> > drivers/gpu/drm/drm_connector.c | 20 ++++++++++
> > drivers/gpu/drm/drm_hdcp.c | 65 +++++++++++++++++++++++++++++++
> > include/drm/drm_connector.h | 6 +++
> > include/drm/drm_hdcp.h | 6 +++
> > include/drm/drm_mode_config.h | 6 +++
> > include/uapi/drm/drm_mode.h | 37 ++++++++++++++++++
> > 7 files changed, 143 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> > index 0b0747869963..1c9e1ab0d536 100644
> > --- a/drivers/gpu/drm/drm_atomic_uapi.c
> > +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> > @@ -813,6 +813,9 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
> > *val = state->content_protection;
> > } else if (property == config->hdcp_content_type_property) {
> > *val = state->hdcp_content_type;
> > + } else if (property == config->hdcp_topology_property) {
> > + *val = connector->hdcp_topology_blob_ptr ?
> > + connector->hdcp_topology_blob_ptr->base.id : 0;
> > } else if (property == config->writeback_fb_id_property) {
> > /* Writeback framebuffer is one-shot, write and forget */
> > *val = 0;
> > diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> > index 436cf8e764cc..033ced774d37 100644
> > --- a/drivers/gpu/drm/drm_connector.c
> > +++ b/drivers/gpu/drm/drm_connector.c
> > @@ -246,6 +246,7 @@ int drm_connector_init(struct drm_device *dev,
> > mutex_init(&connector->mutex);
> > connector->edid_blob_ptr = NULL;
> > connector->tile_blob_ptr = NULL;
> > + connector->hdcp_topology_blob_ptr = NULL;
> > connector->status = connector_status_unknown;
> > connector->display_info.panel_orientation =
> > DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > @@ -972,6 +973,25 @@ static const struct drm_prop_enum_list hdmi_colorspaces[] = {
> > * authentication process. If content type is changed when
> > * content_protection is not UNDESIRED, then kernel will disable the HDCP
> > * and re-enable with new type in the same atomic commit
> > + * HDCP Topology:
> > + * This blob property is used to pass the HDCP downstream topology details
> > + * of a HDCP encrypted connector, from kernel to userspace.
> > + * This provides all required information to userspace, so that userspace
> > + * can implement the HDCP repeater using the kernel as downstream ports of
> > + * the repeater. as illustrated below:
> > + *
> > + * HDCP Repeaters
> > + * +--------------------------------------------------------------+
> > + * | |
> > + * | | |
> > + * | Userspace HDCP Receiver +-----> KMD HDCP transmitters |
> > + * | (Upstream Port) <------+ (Downstream Ports) |
> > + * | | |
> > + * | |
> > + * +--------------------------------------------------------------+
>
> Hm I think this misrenders, since the table isn't indented or marked as
> fixed with. Did you check the output of $make htmldocs?
Yes checked on doc output. corrupted. I will fix it.
>
> > + *
> > + * Kernel will populate this blob only when the HDCP authentication is
> > + * successful.
> > *
> > * max bpc:
> > * This range property is used by userspace to limit the bit depth. When
> > diff --git a/drivers/gpu/drm/drm_hdcp.c b/drivers/gpu/drm/drm_hdcp.c
> > index 5640c4e744fe..c0d3fc93fc50 100644
> > --- a/drivers/gpu/drm/drm_hdcp.c
> > +++ b/drivers/gpu/drm/drm_hdcp.c
> > @@ -431,3 +431,68 @@ void drm_hdcp_update_content_protection(struct drm_connector *connector,
> > dev->mode_config.content_protection_property);
> > }
> > EXPORT_SYMBOL(drm_hdcp_update_content_protection);
> > +
> > +/**
> > + * drm_connector_attach_hdcp_topology_property - attach hdcp topology property
> > + *
> > + * @connector: connector to attach hdcp topology property with.
> > + *
> > + * This is used to add support for hdcp topology support on select connectors.
> > + * When Intel platform is configured as repeater, this downstream info is used
> > + * by userspace, to complete the repeater authentication of HDCP specification
> > + * with upstream HDCP transmitter.
> > + *
> > + * The blob_id of the hdcp topology info will be set to
> > + * &drm_connector_state.hdcp_topology
> > + *
> > + * Returns:
> > + * Zero on success, negative errno on failure.
> > + */
> > +int drm_connector_attach_hdcp_topology_property(struct drm_connector *connector)
> > +{
> > + struct drm_device *dev = connector->dev;
> > + struct drm_property *prop = dev->mode_config.hdcp_topology_property;
> > +
> > + if (!prop)
> > + prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
> > + DRM_MODE_PROP_IMMUTABLE,
> > + "HDCP Topology", 0);
> > + if (!prop)
> > + return -ENOMEM;
> > +
> > + drm_object_attach_property(&connector->base, prop, 0);
> > + dev->mode_config.hdcp_topology_property = prop;
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(drm_connector_attach_hdcp_topology_property);
> > +
> > +/**
> > + * drm_connector_update_hdcp_topology_property - update the hdcp topology
> > + * property of a connector
> > + * @connector: drm connector, the topology is associated to
> > + * @hdcp_topology_info: new content for the blob of hdcp_topology_property
> > + *
> > + * This function creates a new blob modeset object and assigns its id to the
> > + * connector's hdcp_topology_property.
> > + *
> > + * Returns:
> > + * Zero on success, negative errno on failure.
> > + */
> > +int
> > +drm_connector_update_hdcp_topology_property(struct drm_connector *connector,
> > + const struct hdcp_topology_info *info)
> > +{
> > + struct drm_device *dev = connector->dev;
> > + int ret;
> > +
> > + if (!info)
> > + return -EINVAL;
> > +
> > + ret = drm_property_replace_global_blob(dev,
> > + &connector->hdcp_topology_blob_ptr,
> > + sizeof(struct hdcp_topology_info),
> > + info, &connector->base,
> > + dev->mode_config.hdcp_topology_property);
> > + return ret;
> > +}
>
> Hm, I'd put this into the previous function that also sends out the
> uevent. That way we can guarantee that we update everyting _before_ we
> send out the uevent to signal to userspace that it should take some
> action.
That will not work as above fucntion wont be called for the disable
request. Where as this blob needs to be removed on disable. So I prefer
to keep this as separate.
>
> > +EXPORT_SYMBOL(drm_connector_update_hdcp_topology_property);
> > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> > index 9e2f1a9de2a0..180f8f4d4526 100644
> > --- a/include/drm/drm_connector.h
> > +++ b/include/drm/drm_connector.h
> > @@ -1050,6 +1050,12 @@ struct drm_connector {
> > /** @properties: property tracking for this connector */
> > struct drm_object_properties properties;
> >
> > + /**
> > + * @hdcp_topology_blob_ptr: DRM BLOB pointer for hdcp downstream
> > + * topology information.
> > + */
> > + struct drm_property_blob *hdcp_topology_blob_ptr;
> > +
> > /**
> > * @scaling_mode_property: Optional atomic property to control the
> > * upscaling. See drm_connector_attach_content_protection_property().
> > diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h
> > index 9457c7ec0d37..011f35e121a5 100644
> > --- a/include/drm/drm_hdcp.h
> > +++ b/include/drm/drm_hdcp.h
> > @@ -300,10 +300,16 @@ struct hdcp2_srm_header {
> >
> > struct drm_device;
> > struct drm_connector;
> > +struct hdcp_topology_info;
> >
> > bool drm_hdcp_ksvs_revocated(struct drm_device *dev, u8 *ksvs, u32 ksv_count);
> > int drm_connector_attach_content_protection_property(
> > struct drm_connector *connector, bool hdcp_content_type);
> > void drm_hdcp_update_content_protection(struct drm_connector *connector,
> > u64 val);
> > +int drm_connector_attach_hdcp_topology_property(
> > + struct drm_connector *connector);
> > +int drm_connector_update_hdcp_topology_property(
> > + struct drm_connector *connector,
> > + const struct hdcp_topology_info *info);
> > #endif
> > diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> > index b359b5b71eb9..4349b614fa15 100644
> > --- a/include/drm/drm_mode_config.h
> > +++ b/include/drm/drm_mode_config.h
> > @@ -848,6 +848,12 @@ struct drm_mode_config {
> > */
> > struct drm_property *hdcp_content_type_property;
> >
> > + /**
> > + * @hdcp_topology_property: DRM BLOB property for hdcp downstream
> > + * topology information.
> > + */
> > + struct drm_property *hdcp_topology_property;
> > +
> > /* dumb ioctl parameters */
> > uint32_t preferred_depth, prefer_shadow;
> >
> > diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> > index 8ac03351fdee..9d7cdfab4962 100644
> > --- a/include/uapi/drm/drm_mode.h
> > +++ b/include/uapi/drm/drm_mode.h
> > @@ -213,6 +213,43 @@ extern "C" {
> > #define DRM_MODE_HDCP_CONTENT_TYPE0 0
> > #define DRM_MODE_HDCP_CONTENT_TYPE1 1
> >
> > +#define DRM_MODE_HDCP_KSV_LEN 5
> > +#define DRM_MODE_HDCP_MAX_DEVICE_CNT 127
> > +#define DRM_MODE_HDCP14_IN_FORCE (1 << 0)
> > +#define DRM_MODE_HDCP22_IN_FORCE (1 << 1)
> > +
> > +struct hdcp_topology_info {
> > + /* Version of HDCP authenticated (1.4/2.2) */
> > + __u32 ver_in_force;
> > +
> > + /* Applicable only for HDCP2.2 */
> > + __u32 content_type;
> > +
> > + /* KSV of immediate HDCP Sink. In Little-Endian Format. */
> > + __u8 bksv[DRM_MODE_HDCP_KSV_LEN];
> > +
> > + /* Whether Immediate HDCP sink is a repeater? */
> > + __u8 is_repeater;
> > +
> > + /* Depth received from immediate downstream repeater */
> > + __u8 depth;
> > + __u8 pad1;
> > +
> > + /* Device count received from immediate downstream repeater */
> > + __u32 device_count;
> > +
> > + /*
> > + * Max buffer required to hold ksv list received from immediate
> > + * repeater. In this array first device_count * DRM_MODE_HDCP_KSV_LEN
> > + * will hold the valid ksv bytes.
> > + * If authentication specification is
> > + * HDCP1.4 - each KSV's Bytes will be in Little-Endian format.
> > + * HDCP2.2 - each KSV's Bytes will be in Big-Endian format.
> > + */
> > + __u8 ksv_list[DRM_MODE_HDCP_KSV_LEN * DRM_MODE_HDCP_MAX_DEVICE_CNT];
> > + __u8 pad2[5];
> > +} __packed;
>
> So I think we need userspace for this, but not sure where the discussions
> on that are right now. Is this feasible, or this and follow-up i915 patch
> more fyi and not for upstream?
This is not for upstream, as i couldn't comeup with userspace. I will
mention that in the commit msg. Otherwise share your view on the patch.
-Ram
> -Daniel
>
> > +
> > struct drm_mode_modeinfo {
> > __u32 clock;
> > __u16 hdisplay;
> > --
> > 2.19.1
> >
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
More information about the Intel-gfx
mailing list