[Intel-gfx] [PATCH v5 5/9] drm/i915/tgl: Add helper function to prefer dc3co over dc5
Anshuman Gupta
anshuman.gupta at intel.com
Fri Aug 9 18:32:19 UTC 2019
We need to have a S/W flag based upon which driver can switch to DC3CO.
If it is only edp display connected and it has psr2 capability,
then set a prefer_dc3co flag to true, which will be used to
switch to dc3co as well as to program DC3CO PSR2 transcoder
early exitline event.
Cc: Jani Nikula <jani.nikula at intel.com>
Cc: Imre Deak <imre.deak at intel.com>
Cc: Animesh Manna <animesh.manna at intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 5 +
.../drm/i915/display/intel_display_power.c | 105 ++++++++++++++++++
.../drm/i915/display/intel_display_power.h | 5 +
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/intel_pm.c | 2 +-
drivers/gpu/drm/i915/intel_pm.h | 2 +
6 files changed, 119 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 647f49ca86ff..1ec204c14a10 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -6448,6 +6448,9 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,
if (WARN_ON(intel_crtc->active))
return;
+ /* Enable PSR2 transcoder exit line */
+ if (pipe_config->has_psr2 && dev_priv->csr.prefer_dc3co)
+ tgl_enable_psr2_transcoder_exitline(pipe_config);
intel_encoders_pre_pll_enable(intel_crtc, pipe_config, state);
@@ -13685,6 +13688,8 @@ static int intel_atomic_check(struct drm_device *dev,
"[modeset]" : "[fastset]");
}
+ tgl_prefer_dc3co_over_dc5_check(dev_priv, state);
+
return 0;
fail:
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 167839060154..04a02c88ff93 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -18,6 +18,7 @@
#include "intel_hotplug.h"
#include "intel_sideband.h"
#include "intel_tc.h"
+#include "intel_pm.h"
bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
enum i915_power_well_id power_well_id);
@@ -791,6 +792,110 @@ static void gen9_set_dc_state(struct drm_i915_private *dev_priv, u32 state)
dev_priv->csr.dc_state = val & mask;
}
+void tgl_enable_psr2_transcoder_exitline(struct intel_crtc_state *cstate)
+{
+ u32 linetime_us, val, exit_scanlines;
+ u32 crtc_vdisplay = cstate->base.adjusted_mode.crtc_vdisplay;
+ struct drm_i915_private *dev_priv = to_i915(cstate->base.crtc->dev);
+
+ if (WARN_ON(cstate->cpu_transcoder != TRANSCODER_A))
+ return;
+
+ linetime_us = fixed16_to_u32_round_up(intel_get_linetime_us(cstate));
+ if (WARN_ON(!linetime_us))
+ return;
+ /*
+ * DC3CO Exit time 200us B.Spec 49196
+ * PSR2 transcoder Early Exit scanlines = ROUNDUP(200 / line time) + 1
+ * Exit line event need to program above calculated scan lines before
+ * next VBLANK.
+ */
+ exit_scanlines = DIV_ROUND_UP(200, linetime_us) + 1;
+ if (WARN_ON(exit_scanlines > crtc_vdisplay))
+ return;
+
+ exit_scanlines = crtc_vdisplay - exit_scanlines;
+ exit_scanlines <<= EXITLINE_SHIFT;
+ val = I915_READ(EXITLINE(cstate->cpu_transcoder));
+ val &= ~(EXITLINE_MASK | EXITLINE_ENABLE);
+ val |= exit_scanlines;
+ val |= EXITLINE_ENABLE;
+ I915_WRITE(EXITLINE(cstate->cpu_transcoder), val);
+}
+
+static bool tgl_is_only_edp_connected(struct intel_crtc_state *crtc_state)
+{
+ struct drm_atomic_state *state = crtc_state->base.state;
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_connector *connector, *edp_connector = NULL;
+ struct drm_connector_state *connector_state;
+ int i;
+
+ for_each_new_connector_in_state(state, connector, connector_state, i) {
+ if (connector_state->crtc != &crtc->base)
+ continue;
+
+ if (connector->status == connector_status_connected &&
+ connector->connector_type != DRM_MODE_CONNECTOR_eDP)
+ return false;
+ else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP &&
+ connector->status == connector_status_connected)
+ edp_connector = connector;
+ }
+
+ if (edp_connector)
+ return true;
+
+ return false;
+}
+
+/*
+ * tgl_prefer_dc3co_over_dc5_check check whether it is worth to choose
+ * DC3CO over DC5. Currently it just check crtc psr2 capebilty and only
+ * edp display should be connected.
+ * TODO: Prefer DC3CO over DC5 only in video playback.
+ */
+void tgl_prefer_dc3co_over_dc5_check(struct drm_i915_private *dev_priv,
+ struct intel_atomic_state *state)
+{
+ struct intel_crtc_state *crtc_state, *mode_changed_cstate;
+ struct intel_crtc *crtc;
+ int i;
+ u32 val;
+
+ dev_priv->csr.prefer_dc3co = false;
+
+ if (!IS_TIGERLAKE(dev_priv))
+ return;
+
+ if (!(dev_priv->csr.allowed_dc_mask & DC_STATE_EN_DC3CO))
+ return;
+
+ for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
+ if (crtc->pipe == PIPE_A)
+ mode_changed_cstate = crtc_state;
+ if (!crtc_state->has_psr2 && crtc_state->base.active) {
+ dev_priv->csr.prefer_dc3co = false;
+ return;
+ } else if (crtc_state->has_psr2) {
+ if (tgl_is_only_edp_connected(crtc_state) &&
+ crtc_state->base.active) {
+ dev_priv->csr.prefer_dc3co = true;
+ continue;
+ } else {
+ dev_priv->csr.prefer_dc3co = false;
+ return;
+ }
+ }
+ }
+
+ if (dev_priv->csr.prefer_dc3co) {
+ val = I915_READ(EXITLINE(mode_changed_cstate->cpu_transcoder));
+ if (!(val & EXITLINE_ENABLE))
+ mode_changed_cstate->base.mode_changed = true;
+ }
+}
+
static void tgl_allow_dc3co(struct drm_i915_private *dev_priv)
{
gen9_set_dc_state(dev_priv, DC_STATE_EN_DC3CO);
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.h b/drivers/gpu/drm/i915/display/intel_display_power.h
index 97f2562fc5d3..46e1bcfa490a 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.h
+++ b/drivers/gpu/drm/i915/display/intel_display_power.h
@@ -12,6 +12,8 @@
struct drm_i915_private;
struct intel_encoder;
+struct intel_crtc_state;
+struct intel_atomic_state;
enum intel_display_power_domain {
POWER_DOMAIN_DISPLAY_CORE,
@@ -246,6 +248,9 @@ void intel_display_power_suspend_late(struct drm_i915_private *i915);
void intel_display_power_resume_early(struct drm_i915_private *i915);
void intel_display_power_suspend(struct drm_i915_private *i915);
void intel_display_power_resume(struct drm_i915_private *i915);
+void tgl_prefer_dc3co_over_dc5_check(struct drm_i915_private *dev_priv,
+ struct intel_atomic_state *state);
+void tgl_enable_psr2_transcoder_exitline(struct intel_crtc_state *cstate);
const char *
intel_display_power_domain_str(struct drm_i915_private *i915,
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 3cdb5bf489f2..7ca0703209a4 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -332,6 +332,7 @@ struct intel_csr {
u32 dc_state;
u32 allowed_dc_mask;
intel_wakeref_t wakeref;
+ bool prefer_dc3co;
};
enum i915_cache_level {
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 780df8db2eba..634e43219164 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4584,7 +4584,7 @@ skl_wm_method2(u32 pixel_rate, u32 pipe_htotal, u32 latency,
return ret;
}
-static uint_fixed_16_16_t
+uint_fixed_16_16_t
intel_get_linetime_us(const struct intel_crtc_state *crtc_state)
{
u32 pixel_rate;
diff --git a/drivers/gpu/drm/i915/intel_pm.h b/drivers/gpu/drm/i915/intel_pm.h
index e3573e1e16e3..454e92c06dff 100644
--- a/drivers/gpu/drm/i915/intel_pm.h
+++ b/drivers/gpu/drm/i915/intel_pm.h
@@ -8,6 +8,7 @@
#include <linux/types.h>
+#include "i915_drv.h"
#include "i915_reg.h"
struct drm_device;
@@ -76,6 +77,7 @@ u64 intel_rc6_residency_ns(struct drm_i915_private *dev_priv, i915_reg_t reg);
u64 intel_rc6_residency_us(struct drm_i915_private *dev_priv, i915_reg_t reg);
u32 intel_get_cagf(struct drm_i915_private *dev_priv, u32 rpstat1);
+uint_fixed_16_16_t intel_get_linetime_us(const struct intel_crtc_state *cstate);
unsigned long i915_chipset_val(struct drm_i915_private *dev_priv);
unsigned long i915_mch_val(struct drm_i915_private *dev_priv);
--
2.21.0
More information about the Intel-gfx
mailing list