[Intel-gfx] [PATCH v7 0/9] drm: cec: convert DRM drivers to the new notifier API

Neil Armstrong narmstrong at baylibre.com
Mon Aug 19 14:48:49 UTC 2019


Hi Dariusz, Hans,

I can apply the dw-hdmi patches if necessary.

Neil

On 19/08/2019 11:38, Hans Verkuil wrote:
> Hi all,
> 
> The patches in this series can be applied independently from each other.
> 
> If you maintain one of these drivers and you want to merge it for v5.4
> yourself, then please do so and let me know. If you prefer I commit it
> to drm-misc, then please review and (hopefully) Ack the patch.
> 
> I would really like to get this in for v5.4 so I can get the userspace
> bits in for v5.4 as well through the media subsystem.
> 
> Dariusz, can you post a v7.1 for patch 5/9 fixing the typo?
> 
> Thanks!
> 
> 	Hans
> 
> On 8/14/19 12:44 PM, Dariusz Marcinkiewicz wrote:
>> This series updates DRM drivers to use new CEC notifier API.
>>
>> Changes since v6:
>> 	Made CEC notifiers' registration and de-registration symmetric
>> 	in tda998x and dw-hdmi drivers. Also, accidentally dropped one
>> 	patch in v6 (change to drm_dp_cec), brought it back now.
>> Changes since v5:
>>         Fixed a warning about a missing comment for a new member of
>> 	drm_dp_aux_cec struct. Sending to a wider audience,
>> 	including maintainers of respective drivers.
>> Changes since v4:
>> 	Addressing review comments.
>> Changes since v3:
>>         Updated adapter flags in dw-hdmi-cec.
>> Changes since v2:
>> 	Include all DRM patches from "cec: improve notifier support,
>> 	add connector info connector info" series.
>> Changes since v1:
>> 	Those patches delay creation of notifiers until respective
>> 	connectors are constructed. It seems that those patches, for a
>> 	couple of drivers, by adding the delay, introduce a race between
>> 	notifiers' creation and the IRQs handling threads - at least I
>> 	don't see anything obvious in there that would explicitly forbid
>> 	such races to occur. v2 adds a write barrier to make sure IRQ
>> 	threads see the notifier once it is created (replacing the
>> 	WRITE_ONCE I put in v1). The best thing to do here, I believe,
>> 	would be not to have any synchronization and make sure that an IRQ
>> 	only gets enabled after the notifier is created.
>> Dariusz Marcinkiewicz (9):
>>   drm_dp_cec: add connector info support.
>>   drm/i915/intel_hdmi: use cec_notifier_conn_(un)register
>>   dw-hdmi-cec: use cec_notifier_cec_adap_(un)register
>>   tda9950: use cec_notifier_cec_adap_(un)register
>>   drm: tda998x: use cec_notifier_conn_(un)register
>>   drm: sti: use cec_notifier_conn_(un)register
>>   drm: tegra: use cec_notifier_conn_(un)register
>>   drm: dw-hdmi: use cec_notifier_conn_(un)register
>>   drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register
>>
>>  .../display/amdgpu_dm/amdgpu_dm_mst_types.c   |  2 +-
>>  drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c | 13 +++---
>>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c     | 46 +++++++++++++------
>>  drivers/gpu/drm/drm_dp_cec.c                  | 25 ++++++----
>>  drivers/gpu/drm/exynos/exynos_hdmi.c          | 31 +++++++------
>>  drivers/gpu/drm/i2c/tda9950.c                 | 12 ++---
>>  drivers/gpu/drm/i2c/tda998x_drv.c             | 36 ++++++++++-----
>>  drivers/gpu/drm/i915/display/intel_dp.c       |  4 +-
>>  drivers/gpu/drm/i915/display/intel_hdmi.c     | 13 ++++--
>>  drivers/gpu/drm/nouveau/nouveau_connector.c   |  3 +-
>>  drivers/gpu/drm/sti/sti_hdmi.c                | 19 +++++---
>>  drivers/gpu/drm/tegra/output.c                | 28 ++++++++---
>>  include/drm/drm_dp_helper.h                   | 17 ++++---
>>  13 files changed, 155 insertions(+), 94 deletions(-)
>>
> 



More information about the Intel-gfx mailing list