[Intel-gfx] [PATCH 33/39] drm/i915/perf: add a parameter to control the size of OA buffer

Umesh Nerlige Ramappa umesh.nerlige.ramappa at intel.com
Mon Aug 19 18:31:37 UTC 2019


Looks good.

Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa at intel.com>

On Fri, Aug 16, 2019 at 01:04:57AM -0700, Lucas De Marchi wrote:
>From: Lionel Landwerlin <lionel.g.landwerlin at intel.com>
>
>The way our hardware is designed doesn't seem to let us use the
>MI_RECORD_PERF_COUNT command without setting up a circular buffer.
>
>In the case where the user didn't request OA reports to be available
>through the i915 perf stream, we can set the OA buffer to the minimum
>size to avoid consuming memory which won't be used by the driver.
>
>Cc: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
>Cc: Matthew Auld <matthew.auld at intel.com>
>Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin at intel.com>
>Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
>---
> drivers/gpu/drm/i915/i915_perf.c | 98 +++++++++++++++++++++-----------
> drivers/gpu/drm/i915/i915_reg.h  |  2 +
> include/uapi/drm/i915_drm.h      |  7 +++
> 3 files changed, 74 insertions(+), 33 deletions(-)
>
>diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
>index 2c9f46e12622..9386d9c82930 100644
>--- a/drivers/gpu/drm/i915/i915_perf.c
>+++ b/drivers/gpu/drm/i915/i915_perf.c
>@@ -216,13 +216,7 @@
> #include "oa/i915_oa_cnl.h"
> #include "oa/i915_oa_icl.h"
>
>-/* HW requires this to be a power of two, between 128k and 16M, though driver
>- * is currently generally designed assuming the largest 16M size is used such
>- * that the overflow cases are unlikely in normal operation.
>- */
>-#define OA_BUFFER_SIZE		SZ_16M
>-
>-#define OA_TAKEN(tail, head)	((tail - head) & (OA_BUFFER_SIZE - 1))
>+#define OA_TAKEN(tail, head)	(((tail) - (head)) & (stream->oa_buffer.vma->size - 1))
>
> /**
>  * DOC: OA Tail Pointer Race
>@@ -347,6 +341,7 @@ static const struct i915_oa_format gen8_plus_oa_formats[I915_OA_FORMAT_MAX] = {
>  * @oa_format: An OA unit HW report format
>  * @oa_periodic: Whether to enable periodic OA unit sampling
>  * @oa_period_exponent: The OA unit sampling period is derived from this
>+ * @oa_buffer_size_exponent: The OA buffer size is derived from this
>  *
>  * As read_properties_unlocked() enumerates and validates the properties given
>  * to open a stream of metrics the configuration is built up in the structure
>@@ -363,6 +358,7 @@ struct perf_open_properties {
> 	int oa_format;
> 	bool oa_periodic;
> 	int oa_period_exponent;
>+	u32 oa_buffer_size_exponent;
> };
>
> static enum hrtimer_restart oa_poll_check_timer_cb(struct hrtimer *hrtimer);
>@@ -531,7 +527,7 @@ static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream)
> 		 * could put the tail out of bounds...
> 		 */
> 		if (hw_tail >= gtt_offset &&
>-		    hw_tail < (gtt_offset + OA_BUFFER_SIZE)) {
>+		    hw_tail < (gtt_offset + stream->oa_buffer.vma->size)) {
> 			stream->oa_buffer.tails[!aged_idx].offset =
> 				aging_tail = hw_tail;
> 			stream->oa_buffer.aging_timestamp = now;
>@@ -659,7 +655,7 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream,
> 	int report_size = stream->oa_buffer.format_size;
> 	u8 *oa_buf_base = stream->oa_buffer.vaddr;
> 	u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
>-	u32 mask = (OA_BUFFER_SIZE - 1);
>+	u32 mask = (stream->oa_buffer.vma->size - 1);
> 	size_t start_offset = *offset;
> 	unsigned long flags;
> 	unsigned int aged_tail_idx;
>@@ -699,8 +695,8 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream,
> 	 * only be incremented by multiples of the report size (notably also
> 	 * all a power of two).
> 	 */
>-	if (WARN_ONCE(head > OA_BUFFER_SIZE || head % report_size ||
>-		      tail > OA_BUFFER_SIZE || tail % report_size,
>+	if (WARN_ONCE(head > stream->oa_buffer.vma->size || head % report_size ||
>+		      tail > stream->oa_buffer.vma->size || tail % report_size,
> 		      "Inconsistent OA buffer pointers: head = %u, tail = %u\n",
> 		      head, tail))
> 		return -EIO;
>@@ -723,7 +719,7 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream,
> 		 * here would imply a driver bug that would result
> 		 * in an overrun.
> 		 */
>-		if (WARN_ON((OA_BUFFER_SIZE - head) < report_size)) {
>+		if (WARN_ON((stream->oa_buffer.vma->size - head) < report_size)) {
> 			DRM_ERROR("Spurious OA head ptr: non-integral report offset\n");
> 			break;
> 		}
>@@ -881,11 +877,6 @@ static int gen8_oa_read(struct i915_perf_stream *stream,
> 	 * automatically triggered reports in this condition and so we
> 	 * have to assume that old reports are now being trampled
> 	 * over.
>-	 *
>-	 * Considering how we don't currently give userspace control
>-	 * over the OA buffer size and always configure a large 16MB
>-	 * buffer, then a buffer overflow does anyway likely indicate
>-	 * that something has gone quite badly wrong.
> 	 */
> 	if (oastatus & GEN8_OASTATUS_OABUFFER_OVERFLOW) {
> 		ret = append_oa_status(stream, buf, count, offset,
>@@ -947,7 +938,7 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream,
> 	int report_size = stream->oa_buffer.format_size;
> 	u8 *oa_buf_base = stream->oa_buffer.vaddr;
> 	u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
>-	u32 mask = (OA_BUFFER_SIZE - 1);
>+	u32 mask = (stream->oa_buffer.vma->size - 1);
> 	size_t start_offset = *offset;
> 	unsigned long flags;
> 	unsigned int aged_tail_idx;
>@@ -984,8 +975,8 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream,
> 	 * only be incremented by multiples of the report size (notably also
> 	 * all a power of two).
> 	 */
>-	if (WARN_ONCE(head > OA_BUFFER_SIZE || head % report_size ||
>-		      tail > OA_BUFFER_SIZE || tail % report_size,
>+	if (WARN_ONCE(head > stream->oa_buffer.vma->size || head % report_size ||
>+		      tail > stream->oa_buffer.vma->size || tail % report_size,
> 		      "Inconsistent OA buffer pointers: head = %u, tail = %u\n",
> 		      head, tail))
> 		return -EIO;
>@@ -1005,7 +996,7 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream,
> 		 * here would imply a driver bug that would result
> 		 * in an overrun.
> 		 */
>-		if (WARN_ON((OA_BUFFER_SIZE - head) < report_size)) {
>+		if (WARN_ON((stream->oa_buffer.vma->size - head) < report_size)) {
> 			DRM_ERROR("Spurious OA head ptr: non-integral report offset\n");
> 			break;
> 		}
>@@ -1408,7 +1399,9 @@ static void gen7_init_oa_buffer(struct i915_perf_stream *stream)
>
> 	I915_WRITE(GEN7_OABUFFER, gtt_offset);
>
>-	I915_WRITE(GEN7_OASTATUS1, gtt_offset | OABUFFER_SIZE_16M); /* tail */
>+	I915_WRITE(GEN7_OASTATUS1, gtt_offset |
>+		   ((stream->oa_buffer.size_exponent - 17) <<
>+		    GEN7_OASTATUS1_BUFFER_SIZE_SHIFT)); /* tail */
>
> 	/* Mark that we need updated tail pointers to read from... */
> 	stream->oa_buffer.tails[0].offset = INVALID_TAIL_PTR;
>@@ -1433,7 +1426,7 @@ static void gen7_init_oa_buffer(struct i915_perf_stream *stream)
> 	 * the assumption that new reports are being written to zeroed
> 	 * memory...
> 	 */
>-	memset(stream->oa_buffer.vaddr, 0, OA_BUFFER_SIZE);
>+	memset(stream->oa_buffer.vaddr, 0, stream->oa_buffer.vma->size);
>
> 	/* Maybe make ->pollin per-stream state if we support multiple
> 	 * concurrent streams in the future.
>@@ -1464,7 +1457,9 @@ static void gen8_init_oa_buffer(struct i915_perf_stream *stream)
> 	 *  bit."
> 	 */
> 	I915_WRITE(GEN8_OABUFFER, gtt_offset |
>-		   OABUFFER_SIZE_16M | GEN8_OABUFFER_MEM_SELECT_GGTT);
>+		   ((stream->oa_buffer.size_exponent - 17) <<
>+		    GEN8_OABUFFER_BUFFER_SIZE_SHIFT) |
>+		   GEN8_OABUFFER_MEM_SELECT_GGTT);
> 	I915_WRITE(GEN8_OATAILPTR, gtt_offset & GEN8_OATAILPTR_MASK);
>
> 	/* Mark that we need updated tail pointers to read from... */
>@@ -1492,7 +1487,7 @@ static void gen8_init_oa_buffer(struct i915_perf_stream *stream)
> 	 * the assumption that new reports are being written to zeroed
> 	 * memory...
> 	 */
>-	memset(stream->oa_buffer.vaddr, 0, OA_BUFFER_SIZE);
>+	memset(stream->oa_buffer.vaddr, 0, stream->oa_buffer.vma->size);
>
> 	/*
> 	 * Maybe make ->pollin per-stream state if we support multiple
>@@ -1501,24 +1496,25 @@ static void gen8_init_oa_buffer(struct i915_perf_stream *stream)
> 	stream->pollin = false;
> }
>
>-static int alloc_oa_buffer(struct i915_perf_stream *stream)
>+static int alloc_oa_buffer(struct i915_perf_stream *stream, int size_exponent)
> {
> 	struct drm_i915_gem_object *bo;
> 	struct drm_i915_private *dev_priv = stream->dev_priv;
> 	struct i915_vma *vma;
>+	size_t size = 1U << size_exponent;
> 	int ret;
>
> 	if (WARN_ON(stream->oa_buffer.vma))
> 		return -ENODEV;
>
>+	if (WARN_ON(size < SZ_128K || size > SZ_16M))
>+		return -EINVAL;
>+
> 	ret = i915_mutex_lock_interruptible(&dev_priv->drm);
> 	if (ret)
> 		return ret;
>
>-	BUILD_BUG_ON_NOT_POWER_OF_2(OA_BUFFER_SIZE);
>-	BUILD_BUG_ON(OA_BUFFER_SIZE < SZ_128K || OA_BUFFER_SIZE > SZ_16M);
>-
>-	bo = i915_gem_object_create_shmem(dev_priv, OA_BUFFER_SIZE);
>+	bo = i915_gem_object_create_shmem(dev_priv, size);
> 	if (IS_ERR(bo)) {
> 		DRM_ERROR("Failed to allocate OA buffer\n");
> 		ret = PTR_ERR(bo);
>@@ -1534,6 +1530,7 @@ static int alloc_oa_buffer(struct i915_perf_stream *stream)
> 		goto err_unref;
> 	}
> 	stream->oa_buffer.vma = vma;
>+	stream->oa_buffer.size_exponent = size_exponent;
>
> 	stream->oa_buffer.vaddr =
> 		i915_gem_object_pin_map(bo, I915_MAP_WB);
>@@ -1542,9 +1539,10 @@ static int alloc_oa_buffer(struct i915_perf_stream *stream)
> 		goto err_unpin;
> 	}
>
>-	DRM_DEBUG_DRIVER("OA Buffer initialized, gtt offset = 0x%x, vaddr = %p\n",
>+	DRM_DEBUG_DRIVER("OA Buffer initialized, gtt offset = 0x%x, vaddr = %p, size = %llu\n",
> 			 i915_ggtt_offset(stream->oa_buffer.vma),
>-			 stream->oa_buffer.vaddr);
>+			 stream->oa_buffer.vaddr,
>+			 stream->oa_buffer.vma->size);
>
> 	goto unlock;
>
>@@ -2251,7 +2249,7 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream,
> 	stream->wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm);
> 	intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL);
>
>-	ret = alloc_oa_buffer(stream);
>+	ret = alloc_oa_buffer(stream, props->oa_buffer_size_exponent);
> 	if (ret)
> 		goto err_oa_buf_alloc;
>
>@@ -2823,6 +2821,26 @@ static u64 oa_exponent_to_ns(struct drm_i915_private *dev_priv, int exponent)
> 			 1000ULL * RUNTIME_INFO(dev_priv)->cs_timestamp_frequency_khz);
> }
>
>+static int
>+select_oa_buffer_exponent(struct drm_i915_private *i915,
>+			  u64 requested_size)
>+{
>+	int order;
>+
>+	/*
>+	 * When no size is specified, use the largest size supported by all
>+	 * generations.
>+	 */
>+	if (!requested_size)
>+		return order_base_2(SZ_16M);
>+
>+	order = order_base_2(clamp_t(u64, requested_size, SZ_128K, SZ_16M));
>+	if (requested_size != (1UL << order))
>+		return -EINVAL;
>+
>+	return order;
>+}
>+
> /**
>  * read_properties_unlocked - validate + copy userspace stream open properties
>  * @dev_priv: i915 device instance
>@@ -2950,6 +2968,14 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv,
> 			props->oa_periodic = true;
> 			props->oa_period_exponent = value;
> 			break;
>+		case DRM_I915_PERF_PROP_OA_BUFFER_SIZE:
>+			ret = select_oa_buffer_exponent(dev_priv, value);
>+			if (ret < 0) {
>+				DRM_DEBUG("OA buffer size invalid %llu\n", value);
>+				return ret;
>+			}
>+			props->oa_buffer_size_exponent = ret;
>+			break;
> 		case DRM_I915_PERF_PROP_MAX:
> 			MISSING_CASE(id);
> 			return -EINVAL;
>@@ -2958,6 +2984,12 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv,
> 		uprop += 2;
> 	}
>
>+	/* If no buffer size was requested, select the default one. */
>+	if (!props->oa_buffer_size_exponent) {
>+		props->oa_buffer_size_exponent =
>+			select_oa_buffer_exponent(dev_priv, 0);
>+	}
>+
> 	return 0;
> }
>
>diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>index 34d83e3a51a7..d35f385f8288 100644
>--- a/drivers/gpu/drm/i915/i915_reg.h
>+++ b/drivers/gpu/drm/i915/i915_reg.h
>@@ -675,12 +675,14 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
> #define GEN8_OABUFFER_UDW _MMIO(0x23b4)
> #define GEN8_OABUFFER _MMIO(0x2b14)
> #define  GEN8_OABUFFER_MEM_SELECT_GGTT      (1 << 0)  /* 0: PPGTT, 1: GGTT */
>+#define  GEN8_OABUFFER_BUFFER_SIZE_SHIFT    3
>
> #define GEN7_OASTATUS1 _MMIO(0x2364)
> #define  GEN7_OASTATUS1_TAIL_MASK	    0xffffffc0
> #define  GEN7_OASTATUS1_COUNTER_OVERFLOW    (1 << 2)
> #define  GEN7_OASTATUS1_OABUFFER_OVERFLOW   (1 << 1)
> #define  GEN7_OASTATUS1_REPORT_LOST	    (1 << 0)
>+#define  GEN7_OASTATUS1_BUFFER_SIZE_SHIFT   3
>
> #define GEN7_OASTATUS2 _MMIO(0x2368)
> #define  GEN7_OASTATUS2_HEAD_MASK           0xffffffc0
>diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
>index 469dc512cca3..f662c534de0a 100644
>--- a/include/uapi/drm/i915_drm.h
>+++ b/include/uapi/drm/i915_drm.h
>@@ -1873,6 +1873,13 @@ enum drm_i915_perf_property_id {
> 	 */
> 	DRM_I915_PERF_PROP_OA_EXPONENT,
>
>+	/**
>+	 * Specify a global OA buffer size to be allocated in bytes. The size
>+	 * specified must be supported by HW (currently supported sizes are
>+	 * powers of 2 ranging from 128Kb to 16Mb).
>+	 */
>+	DRM_I915_PERF_PROP_OA_BUFFER_SIZE,
>+
> 	DRM_I915_PERF_PROP_MAX /* non-ABI */
> };
>
>-- 
>2.21.0
>
>_______________________________________________
>Intel-gfx mailing list
>Intel-gfx at lists.freedesktop.org
>https://lists.freedesktop.org/mailman/listinfo/intel-gfx


More information about the Intel-gfx mailing list