[Intel-gfx] [PATCH v2 21/40] drm/i915/tgl: Enable VD HCP/MFX sub-pipe power gating
Lucas De Marchi
lucas.demarchi at intel.com
Tue Aug 20 20:54:23 UTC 2019
On Sat, Aug 17, 2019 at 02:38:43AM -0700, Lucas De Marchi wrote:
>From: Michel Thierry <michel.thierry at intel.com>
>
>HCP/MFX power gating is disabled by default, turn it on for the vd units
>available. User space will also issue a MI_FORCE_WAKEUP properly to
>wake up proper subwell.
>
>During driver load, init_clock_gating happens after device_info_init_mmio
>read the vdbox disable fuse register, so only present vd units will have
>these enabled.
>
>BSpec: 14214
>HSDES: 1209977827
>Cc: Tony Ye <tony.ye at intel.com>
>Signed-off-by: Michel Thierry <michel.thierry at intel.com>
>Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
>---
> drivers/gpu/drm/i915/i915_reg.h | 4 ++++
> drivers/gpu/drm/i915/intel_pm.c | 17 ++++++++++++++++-
> 2 files changed, 20 insertions(+), 1 deletion(-)
>
>diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>index a55f15eb6175..c1b779c40fa8 100644
>--- a/drivers/gpu/drm/i915/i915_reg.h
>+++ b/drivers/gpu/drm/i915/i915_reg.h
>@@ -8621,6 +8621,10 @@ enum {
> #define GEN9_PWRGT_MEDIA_STATUS_MASK (1 << 0)
> #define GEN9_PWRGT_RENDER_STATUS_MASK (1 << 1)
>
>+#define POWERGATE_ENABLE _MMIO(0xa210)
>+#define VDN_HCP_POWERGATE_ENABLE(n) BIT(((n) * 2) + 3)
>+#define VDN_MFX_POWERGATE_ENABLE(n) BIT(((n) * 2) + 4)
>+
> #define GTFIFODBG _MMIO(0x120000)
> #define GT_FIFO_SBDEDICATE_FREE_ENTRY_CHV (0x1f << 20)
> #define GT_FIFO_FREE_ENTRIES_CHV (0x7f << 13)
>diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
>index 75ee027abb80..604c53793726 100644
>--- a/drivers/gpu/drm/i915/intel_pm.c
>+++ b/drivers/gpu/drm/i915/intel_pm.c
>@@ -9078,6 +9078,21 @@ static void icl_init_clock_gating(struct drm_i915_private *dev_priv)
> _MASKED_BIT_ENABLE(GEN11_ENABLE_32_PLANE_MODE));
> }
>
>+static void tgl_init_clock_gating(struct drm_i915_private *dev_priv)
>+{
>+ u32 vd_pg_enable = 0;
>+ unsigned int i;
>+
>+ /* This is not a WA. Enable VD HCP & MFX_ENC powergate */
>+ for (i = 0; i < I915_MAX_VCS; i++) {
>+ if (HAS_ENGINE(dev_priv, _VCS(i)))
>+ vd_pg_enable |= VDN_HCP_POWERGATE_ENABLE(i) |
>+ VDN_MFX_POWERGATE_ENABLE(i);
>+ }
missing blank line here. Probably my fault while rebasing.
Reviewed-by: Lucas De Marchi <lucas.demarchi at intel.com>
Lucas De Marchi
>+ I915_WRITE(POWERGATE_ENABLE,
>+ I915_READ(POWERGATE_ENABLE) | vd_pg_enable);
>+}
>+
> static void cnp_init_clock_gating(struct drm_i915_private *dev_priv)
> {
> if (!HAS_PCH_CNP(dev_priv))
>@@ -9598,7 +9613,7 @@ static void nop_init_clock_gating(struct drm_i915_private *dev_priv)
> void intel_init_clock_gating_hooks(struct drm_i915_private *dev_priv)
> {
> if (IS_GEN(dev_priv, 12))
>- dev_priv->display.init_clock_gating = nop_init_clock_gating;
>+ dev_priv->display.init_clock_gating = tgl_init_clock_gating;
> else if (IS_GEN(dev_priv, 11))
> dev_priv->display.init_clock_gating = icl_init_clock_gating;
> else if (IS_CANNONLAKE(dev_priv))
>--
>2.21.0
>
More information about the Intel-gfx
mailing list