[Intel-gfx] [PATCH v5 3/9] drm/i915/tgl: Add power well to enable DC3CO state
Gupta, Anshuman
anshuman.gupta at intel.com
Tue Aug 27 16:17:52 UTC 2019
On 8/27/2019 6:50 PM, Imre Deak wrote:
> On Tue, Aug 27, 2019 at 06:31:31PM +0530, Gupta, Anshuman wrote:
>>
>>
>> On 8/13/2019 8:16 PM, Imre Deak wrote:
>>> On Sat, Aug 10, 2019 at 12:02:17AM +0530, Anshuman Gupta wrote:
>>>> "DC3CO Off" power well inherits its power domains from
>>>> "DC Off" power well, these power domains will disallow
>>>> DC3CO when any external displays are connected and at
>>>> time of modeset and aux programming.
>>>> Renaming "DC Off" power well to "DC5 Off" power well.
>>>>
>>>> v2: commit log improvement.
>>>> v3: Used intel_wait_for_register to wait for DC3CO exit. [Imre]
>>>> Used gen9_set_dc_state() to allow/disallow DC3CO. [Imre]
>>>> Moved transcoder psr2 exit line enablement from tgl_allow_dc3co()
>>>> to a appropriate place haswell_crtc_enable(). [Imre]
>>>> Changed the DC3CO power well enabled call back logic as
>>>> recommended in review comments. [Imre]
>>>> v4: Used wait_for_us() instead of intel_wait_for_reg(). [Imre (IRC)]
>>>> v5: using udelay() instead of waiting for DC3CO exit status.
>>>>
>>>> Cc: Jani Nikula <jani.nikula at intel.com>
>>>> Cc: Imre Deak <imre.deak at intel.com>
>>>> Cc: Animesh Manna <animesh.manna at intel.com>
>>>> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
>>>> Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
>>>> ---
>>>> .../drm/i915/display/intel_display_power.c | 69 ++++++++++++++++++-
>>>> 1 file changed, 67 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
>>>> index e2ef202aeeef..c9e92d48cdab 100644
>>>> --- a/drivers/gpu/drm/i915/display/intel_display_power.c
>>>> +++ b/drivers/gpu/drm/i915/display/intel_display_power.c
>>>> @@ -791,7 +791,26 @@ static void gen9_set_dc_state(struct drm_i915_private *dev_priv, u32 state)
>>>> dev_priv->csr.dc_state = val & mask;
>>>> }
>>>> -static void bxt_enable_dc9(struct drm_i915_private *dev_priv)
>>>> +static void tgl_allow_dc3co(struct drm_i915_private *dev_priv)
>>>> +{
>>>> + gen9_set_dc_state(dev_priv, DC_STATE_EN_DC3CO);
>>>> +}
>>>> +
>>>> +static void tgl_disallow_dc3co(struct drm_i915_private *dev_priv)
>>>> +{
>>>> + u32 val;
>>>> +
>>>> + val = I915_READ(DC_STATE_EN);
>>>> + val &= ~DC_STATE_DC3CO_STATUS;
>>>> + I915_WRITE(DC_STATE_EN, val);
>>>> + gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>>>> + /*
>>>> + * Delay of 200us DC3CO Exit time B.Spec 49196
>>>> + */
>>>> + udelay(200);
>>>> +}
>>>> +
>>>> +void bxt_enable_dc9(struct drm_i915_private *dev_priv)
>>>> {
>>>> assert_can_enable_dc9(dev_priv);
>>>> @@ -1007,6 +1026,33 @@ static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
>>>> gen9_enable_dc5(dev_priv);
>>>> }
>>>> +static void tgl_dc3co_power_well_enable(struct drm_i915_private *dev_priv,
>>>> + struct i915_power_well *power_well)
>>>
>>> Should be called dc3co_off power well.
>>>
>>>> +{
>>>> + tgl_disallow_dc3co(dev_priv);
>>>> +}
>>>> +
>>>> +static void tgl_dc3co_power_well_disable(struct drm_i915_private *dev_priv,
>>>> + struct i915_power_well *power_well)
>>>> +{
>>>> + if (!dev_priv->psr.sink_psr2_support)
>>>> + return;
>>>
>>> We could end up enabling DC3CO while PSR2 is disabled after disabling
>>> a PSR2 capable output, which is against the spec.
>>>
>>> I'm thinking now that we should have a single dc_off power well and a
>>> new interface setting the max allowed DC state (DC3CO, DC5/6).
>> Hi Imre,
>>
>> Could you please comment if below part of new API code set_max_dc_state() is
>> ok? with respect to our DC3CO design sync.
>>
>> static void set_target_dc_state(struct drm_i915_private *dev_priv)
>> {
>> gen9_dc_off_power_well_disable(dev_priv, NULL);
>> }
>>
>> void set_max_dc_state(struct drm_i915_private *dev_priv, u32 state)
>> {
>> bool dc_off_enabled;
>> struct i915_power_domains *power_domains = &dev_priv->power_domains;
>> /* need to define an id for DC off power well "TGL_DISP_DC_OFF"*/
>> dc_off_enabled = intel_display_power_well_is_enabled(dev_priv,
>> TGL_DISP_DC_OFF);
>
> dc_off_enabled can get stale this way until you acquire the lock.
> Probably easier to lookup_power_well() and then check its state with the
> lock held.
>
>>
>> mutex_lock(&power_domains->lock);
>> if (dc_off_enabled) {
>> dev_priv->csr.max_dc_state = state;
>> } else {
>> dev_priv->csr.max_dc_state = state;
>> set_target_dc_state(dev_priv);
>> }
>> mutex_unlock(&power_domains->lock);
>> }
>
>> gen9_dc_off_power_well_disable will enable max_dc_state to DC_STATE_EN
>> register accordingly.
>>
>> There can be only issue according to me here when "DC off" power well
>> is disable (this will happen when we want to set max_dc_state to dc5
>> in dc5_idle_thread). In that case we need to manually call
>> set_target_dc_state()->gen9_dc_off_power_well_disable().
>
> In that case you could just call power_well->enable(), ->disable(), and
> in the ->disable() hook you'd enable the DC state accorindg to
> csr.max_dc_state?
Thanks for suggestion, will incorporate suggesting approach.
Thanks,
Anshuman
>
>>
>> Thanks,
>> Anshuman Gupta.
>>>
>>> (Right now I think there is also a missing re-enabling of DC3CO when
>>> disabling DC5/6).
>>>
>>>> +
>>>> + if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_DC3CO)
>>>> + tgl_allow_dc3co(dev_priv);
>>>> +}
>>>> +
>>>> +static bool tgl_dc3co_power_well_enabled(struct drm_i915_private *dev_priv,
>>>> + struct i915_power_well *power_well)
>>>> +{
>>>> + /*
>>>> + * Checking alone DC_STATE_EN is not enough as DC5 power well also
>>>> + * allow/disallow DC3CO to make sure both are not enabled at same time
>>>> + */
>>>> + return ((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC3CO) == 0 &&
>>>> + (I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0);
>>>> +}
>>>> +
>>>> static void i9xx_power_well_sync_hw_noop(struct drm_i915_private *dev_priv,
>>>> struct i915_power_well *power_well)
>>>> {
>>>> @@ -2611,6 +2657,12 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
>>>> BIT_ULL(POWER_DOMAIN_TRANSCODER_VDSC_PW2) | \
>>>> BIT_ULL(POWER_DOMAIN_INIT))
>>>> +#define TGL_DISPLAY_DC3CO_OFF_POWER_DOMAINS ( \
>>>> + TGL_PW_2_POWER_DOMAINS | \
>>>> + BIT_ULL(POWER_DOMAIN_MODESET) | \
>>>> + BIT_ULL(POWER_DOMAIN_AUX_A) | \
>>>> + BIT_ULL(POWER_DOMAIN_INIT))
>>>> +
>>>> #define TGL_DISPLAY_DC_OFF_POWER_DOMAINS ( \
>>>> TGL_PW_2_POWER_DOMAINS | \
>>>> BIT_ULL(POWER_DOMAIN_MODESET) | \
>>>> @@ -2715,6 +2767,13 @@ static const struct i915_power_well_ops gen9_dc_off_power_well_ops = {
>>>> .is_enabled = gen9_dc_off_power_well_enabled,
>>>> };
>>>> +static const struct i915_power_well_ops tgl_dc3co_power_well_ops = {
>>>> + .sync_hw = i9xx_power_well_sync_hw_noop,
>>>> + .enable = tgl_dc3co_power_well_enable,
>>>> + .disable = tgl_dc3co_power_well_disable,
>>>> + .is_enabled = tgl_dc3co_power_well_enabled,
>>>> +};
>>>> +
>>>> static const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops = {
>>>> .sync_hw = i9xx_power_well_sync_hw_noop,
>>>> .enable = bxt_dpio_cmn_power_well_enable,
>>>> @@ -3626,11 +3685,17 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
>>>> },
>>>> },
>>>> {
>>>> - .name = "DC off",
>>>> + .name = "DC5 off",
>>>> .domains = TGL_DISPLAY_DC_OFF_POWER_DOMAINS,
>>>> .ops = &gen9_dc_off_power_well_ops,
>>>> .id = DISP_PW_ID_NONE,
>>>> },
>>>> + {
>>>> + .name = "DC3CO off",
>>>> + .domains = TGL_DISPLAY_DC3CO_OFF_POWER_DOMAINS,
>>>> + .ops = &tgl_dc3co_power_well_ops,
>>>> + .id = DISP_PW_ID_NONE,
>>>> + },
>>>> {
>>>> .name = "power well 2",
>>>> .domains = TGL_PW_2_POWER_DOMAINS,
>>>> --
>>>> 2.21.0
>>>>
More information about the Intel-gfx
mailing list