[Intel-gfx] [PATCH v3 05/11] drm/i915/dsb: Register definition of DSB registers.

[Animesh Manna]

Added key register definitions of DSB.

dsb-ctrl register is required to enable dsb-engine.

head-ptr register hold the head of buffer address from where the
execution will start.

Programming tail-ptr register is a trigger point to start execution.

Cc: Uma Shankar <uma.shankar at intel.com>
Cc: Jani Nikula <jani.nikula at intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: Animesh Manna <animesh.manna at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 02e1ef10c47e..71c6c2380443 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -11564,4 +11564,19 @@ enum skl_power_gate {
 #define PORT_TX_DFLEXDPCSSS(fia)		_MMIO_FIA((fia), 0x00894)
 #define   DP_PHY_MODE_STATUS_NOT_SAFE(tc_port)		(1 << (tc_port))
 
+/* This register controls the Display State Buffer (DSB) engines. */
+#define _DSBSL_INSTANCE_BASE		0x70B00
+#define DSBSL_INSTANCE(pipe, id)	(_DSBSL_INSTANCE_BASE + \
+					 (pipe) * 0x1000 + (id) * 100)
+#define DSB_HEAD(pipe, id)		_MMIO(DSBSL_INSTANCE(pipe, id) + 0x0)
+#define DSB_TAIL(pipe, id)		_MMIO(DSBSL_INSTANCE(pipe, id) + 0x4)
+#define DSB_CTRL(pipe, id)		_MMIO(DSBSL_INSTANCE(pipe, id) + 0x8)
+#define   DSB_ENABLE			(1 << 31)
+#define   DSB_BUFFER_REITERATE		(1 << 29)
+#define   DSB_WAIT_FOR_VBLANK		(1 << 28)
+#define   DSB_WAIT_FOR_LINE_IN_RANGE	(1 << 27)
+#define   DSB_HALT			(1 << 16)
+#define   DSB_NON_POSTED_ENABLE		(1 << 8)
+#define   DSB_STATUS			(1 << 0)
+
 #endif /* _I915_REG_H_ */
-- 
2.22.0