[Intel-gfx] Workqueue - warning splat
Chris Clayton
chris2553 at googlemail.com
Wed Aug 28 15:14:20 UTC 2019
Hi,
I've just copying 319G of data from a partition on one USB-attached (/dev/sdb3) to a partition on another USB-attached
drive (/dev/sdc1). It's not quite finished but as it's progressed, I have been reading email and browsing web sites, so
switching between windows from time to time.
I found the splat below at the end the output from dmesg:
[ 1578.086588] usb 2-5: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 1578.107688] usb 2-5: New USB device found, idVendor=0080, idProduct=a001, bcdDevice= 2.04
[ 1578.107691] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1578.107691] usb 2-5: Product: External USB 3.0
[ 1578.107692] usb 2-5: Manufacturer: TOSHIBA
[ 1578.107693] usb 2-5: SerialNumber: 201503310007F
[ 1578.111610] scsi host5: uas
[ 1578.111951] scsi 5:0:0:0: Direct-Access TO Exter nal USB 3.0 0204 PQ: 0 ANSI: 6
[ 1578.112422] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 1578.113132] sd 5:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1578.113133] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 1578.113280] sd 5:0:0:0: [sdb] Write Protect is off
[ 1578.113281] sd 5:0:0:0: [sdb] Mode Sense: 53 00 00 08
[ 1578.113570] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1578.113846] sd 5:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1578.192462] sdb: sdb1 sdb2 sdb3
[ 1578.195765] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1579.080448] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1579.588368] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 1639.062480] usb 1-1: new high-speed USB device number 6 using xhci_hcd
[ 1639.314611] usb 1-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 5.08
[ 1639.314613] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1639.314614] usb 1-1: Product: USB to ATA/ATAPI Bridge
[ 1639.314615] usb 1-1: Manufacturer: JMicron
[ 1639.314615] usb 1-1: SerialNumber: 0123456789ABCDEF
[ 1639.341742] scsi host6: uas
[ 1639.352633] scsi 6:0:0:0: Direct-Access JMicron Generic 0508 PQ: 0 ANSI: 6
[ 1639.353140] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 1642.388518] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1642.388520] sd 6:0:0:0: [sdc] 4096-byte physical blocks
[ 1642.388801] sd 6:0:0:0: [sdc] Write Protect is off
[ 1642.388802] sd 6:0:0:0: [sdc] Mode Sense: 5f 00 00 08
[ 1642.389117] sd 6:0:0:0: [sdc] Disabling FUA
[ 1642.389118] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1642.389342] sd 6:0:0:0: [sdc] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1642.418255] sdc: sdc1
[ 1642.421158] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 1643.970443] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 6048.070133] ------------[ cut here ]------------
[ 6048.070148] workqueue: PF_MEMALLOC task 148(kswapd0) is flushing !WQ_MEM_RECLAIM events:gen6_pm_rps_work [i915]
[ 6048.070152] WARNING: CPU: 6 PID: 148 at kernel/workqueue.c:2598 check_flush_dependency+0x105/0x120
[ 6048.070152] Modules linked in: uas rfcomm bnep iptable_filter xt_conntrack iptable_nat xt_MASQUERADE nf_nat
nf_conntrack nf_defrag_ipv4 coretemp hwmon snd_hda_codec_hdmi snd_hda_codec_generic iwlmvm mac80211 uvcvideo
videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common snd_hda_intel iwlwifi usbhid snd_hda_codec btusb
btintel snd_hwdep x86_pkg_temp_thermal snd_hda_core cfg80211 i915
[ 6048.070162] CPU: 6 PID: 148 Comm: kswapd0 Tainted: G U 5.3.0-rc6+ #40
[ 6048.070163] Hardware name: PC Specialist LTD N8xxEZ /N8xxEZ , BIOS
1.07.08 10/04/2018
[ 6048.070165] RIP: 0010:check_flush_dependency+0x105/0x120
[ 6048.070166] Code: 8d 8a c0 05 00 00 49 89 e8 48 c7 c7 90 61 b5 b0 48 8d 8b b0 00 00 00 4c 89 ca 48 89 04 24 c6 05 02
8f 00 01 01 e8 b2 97 fe ff <0f> 0b 48 8b 04 24 e9 63 ff ff ff 80 3d eb 8e 00 01 00 0f 85 56 ff
[ 6048.070167] RSP: 0018:ffffa6e4003679a0 EFLAGS: 00010086
[ 6048.070167] RAX: 0000000000000000 RBX: ffff8a188d414000 RCX: 0000000000000000
[ 6048.070168] RDX: 0000000000000063 RSI: ffffffffb125f723 RDI: ffffffffb125d28c
[ 6048.070169] RBP: ffffffffc0466390 R08: 000005802d12a057 R09: 0000000000000063
[ 6048.070169] R10: ffffffffb125faa0 R11: 00000000b125f70b R12: ffff8a188c809a80
[ 6048.070170] R13: ffff8a1890a23e00 R14: 0000000000000001 R15: 0000000000000000
[ 6048.070170] FS: 0000000000000000(0000) GS:ffff8a1890b80000(0000) knlGS:0000000000000000
[ 6048.070171] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6048.070172] CR2: 00000000025d1fa0 CR3: 00000004d700a004 CR4: 00000000003606e0
[ 6048.070172] Call Trace:
[ 6048.070175] __flush_work+0x8d/0x1d0
[ 6048.070176] ? try_to_wake_up+0x1b9/0x3b0
[ 6048.070177] __cancel_work_timer+0xfb/0x180
[ 6048.070179] ? synchronize_irq+0x30/0xa0
[ 6048.070204] ? fwtable_write32+0xf1/0x180 [i915]
[ 6048.070212] gen6_disable_rps_interrupts+0x79/0xa0 [i915]
[ 6048.070220] gen6_rps_idle+0xe/0xd0 [i915]
[ 6048.070230] intel_gt_park+0x4f/0x60 [i915]
[ 6048.070239] __intel_wakeref_put_last+0x12/0x40 [i915]
[ 6048.070248] __engine_park+0xb7/0xc0 [i915]
[ [ 1578.086588] usb 2-5: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 1578.107688] usb 2-5: New USB device found, idVendor=0080, idProduct=a001, bcdDevice= 2.04
[ 1578.107691] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1578.107691] usb 2-5: Product: External USB 3.0
[ 1578.107692] usb 2-5: Manufacturer: TOSHIBA
[ 1578.107693] usb 2-5: SerialNumber: 201503310007F
[ 1578.111610] scsi host5: uas
[ 1578.111951] scsi 5:0:0:0: Direct-Access TO Exter nal USB 3.0 0204 PQ: 0 ANSI: 6
[ 1578.112422] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 1578.113132] sd 5:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1578.113133] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 1578.113280] sd 5:0:0:0: [sdb] Write Protect is off
[ 1578.113281] sd 5:0:0:0: [sdb] Mode Sense: 53 00 00 08
[ 1578.113570] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1578.113846] sd 5:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1578.192462] sdb: sdb1 sdb2 sdb3
[ 1578.195765] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1579.080448] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1579.588368] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 1639.062480] usb 1-1: new high-speed USB device number 6 using xhci_hcd
[ 1639.314611] usb 1-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 5.08
[ 1639.314613] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1639.314614] usb 1-1: Product: USB to ATA/ATAPI Bridge
[ 1639.314615] usb 1-1: Manufacturer: JMicron
[ 1639.314615] usb 1-1: SerialNumber: 0123456789ABCDEF
[ 1639.341742] scsi host6: uas
[ 1639.352633] scsi 6:0:0:0: Direct-Access JMicron Generic 0508 PQ: 0 ANSI: 6
[ 1639.353140] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 1642.388518] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1642.388520] sd 6:0:0:0: [sdc] 4096-byte physical blocks
[ 1642.388801] sd 6:0:0:0: [sdc] Write Protect is off
[ 1642.388802] sd 6:0:0:0: [sdc] Mode Sense: 5f 00 00 08
[ 1642.389117] sd 6:0:0:0: [sdc] Disabling FUA
[ 1642.389118] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1642.389342] sd 6:0:0:0: [sdc] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1642.418255] sdc: sdc1
[ 1642.421158] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 1643.970443] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 6048.070133] ------------[ cut here ]------------
[ 6048.070148] workqueue: PF_MEMALLOC task 148(kswapd0) is flushing !WQ_MEM_RECLAIM events:gen6_pm_rps_work [i915]
[ 6048.070152] WARNING: CPU: 6 PID: 148 at kernel/workqueue.c:2598 check_flush_dependency+0x105/0x120
[ 6048.070152] Modules linked in: uas rfcomm bnep iptable_filter xt_conntrack iptable_nat xt_MASQUERADE nf_nat
nf_conntrack nf_defrag_ipv4 coretemp hwmon snd_hda_codec_hdmi snd_hda_codec_generic iwlmvm mac80211 uvcvideo
videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common snd_hda_intel iwlwifi usbhid snd_hda_codec btusb
btintel snd_hwdep x86_pkg_temp_thermal snd_hda_core cfg80211 i915
[ 6048.070162] CPU: 6 PID: 148 Comm: kswapd0 Tainted: G U 5.3.0-rc6+ #40
[ 6048.070163] Hardware name: PC Specialist LTD N8xxEZ /N8xxEZ , BIOS
1.07.08 10/04/2018
[ 6048.070165] RIP: 0010:check_flush_dependency+0x105/0x120
[ 6048.070166] Code: 8d 8a c0 05 00 00 49 89 e8 48 c7 c7 90 61 b5 b0 48 8d 8b b0 00 00 00 4c 89 ca 48 89 04 24 c6 05 02
8f 00 01 01 e8 b2 97 fe ff <0f> 0b 48 8b 04 24 e9 63 ff ff ff 80 3d eb 8e 00 01 00 0f 85 56 ff
[ 6048.070167] RSP: 0018:ffffa6e4003679a0 EFLAGS: 00010086
[ 6048.070167] RAX: 0000000000000000 RBX: ffff8a188d414000 RCX: 0000000000000000
[ 6048.070168] RDX: 0000000000000063 RSI: ffffffffb125f723 RDI: ffffffffb125d28c
[ 6048.070169] RBP: ffffffffc0466390 R08: 000005802d12a057 R09: 0000000000000063
[ 6048.070169] R10: ffffffffb125faa0 R11: 00000000b125f70b R12: ffff8a188c809a80
[ 6048.070170] R13: ffff8a1890a23e00 R14: 0000000000000001 R15: 0000000000000000
[ 6048.070170] FS: 0000000000000000(0000) GS:ffff8a1890b80000(0000) knlGS:0000000000000000
[ 6048.070171] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6048.070172] CR2: 00000000025d1fa0 CR3: 00000004d700a004 CR4: 00000000003606e0
[ 6048.070172] Call Trace:
[ 6048.070175] __flush_work+0x8d/0x1d0
[ 6048.070176] ? try_to_wake_up+0x1b9/0x3b0
[ 6048.070177] __cancel_work_timer+0xfb/0x180
[ 6048.070179] ? synchronize_irq+0x30/0xa0
[ 6048.070204] ? fwtable_write32+0xf1/0x180 [i915]
[ 6048.070212] gen6_disable_rps_interrupts+0x79/0xa0 [i915]
[ 6048.070220] gen6_rps_idle+0xe/0xd0 [i915]
[ 6048.070230] intel_gt_park+0x4f/0x60 [i915]
[ 6048.070239] __intel_wakeref_put_last+0x12/0x40 [i915]
[ 6048.070248] __engine_park+0xb7/0xc0 [i915]
[ 6048.070256] __intel_wakeref_put_last+0x12/0x40 [i915]
[ 6048.070267] i915_request_retire+0x260/0x2f0 [i915]
[ 6048.070278] ring_retire_requests+0x49/0x50 [i915]
[ 6048.070288] i915_retire_requests+0x3e/0x80 [i915]
[ 6048.070298] i915_gem_shrink+0xc2/0x450 [i915]
[ 6048.070309] i915_gem_shrinker_scan+0x5e/0x110 [i915]
[ 6048.070311] shrink_slab.constprop.0+0x1ab/0x260
[ 6048.070313] shrink_node+0x6f/0x1d0
[ 6048.070314] balance_pgdat+0x215/0x470
[ 6048.070316] kswapd+0x153/0x2e0
[ 6048.070317] ? wait_woken+0x70/0x70
[ 6048.070318] kthread+0xf1/0x130
[ 6048.070320] ? balance_pgdat+0x470/0x470
[ 6048.070321] ? kthread_park+0x70/0x70
[ 6048.070322] ret_from_fork+0x1f/0x40
[ 6048.070323] ---[ end trace 5178932352001727 ]---
It might be difficult to create it again, but I guess a heads up might be useful.
Chris
More information about the Intel-gfx
mailing list