[Intel-gfx] [PATCH v3 06/13] drm/i915/dsc: add support for computing and writing PPS for DSI encoders

Kulkarni, Vandita vandita.kulkarni at intel.com
Thu Dec 5 05:44:35 UTC 2019


> -----Original Message-----
> From: Jani Nikula <jani.nikula at intel.com>
> Sent: Tuesday, November 26, 2019 7:13 PM
> To: intel-gfx at lists.freedesktop.org
> Cc: Nikula, Jani <jani.nikula at intel.com>; Navare, Manasi D
> <manasi.d.navare at intel.com>; Kulkarni, Vandita
> <vandita.kulkarni at intel.com>; Ville Syrjälä <ville.syrjala at linux.intel.com>
> Subject: [PATCH v3 06/13] drm/i915/dsc: add support for computing and
> writing PPS for DSI encoders
> 
> Add DSI specific computation and transmission to display of PPS.
> 
> With hopes that this approach will work for both DP and DSI encoders.
> 
> Cc: Manasi Navare <manasi.d.navare at intel.com>
> Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_vdsc.c | 25 ++++++++++++++++++++++-
>  1 file changed, 24 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c
> b/drivers/gpu/drm/i915/display/intel_vdsc.c
> index c53024dfb1ec..7bd727129a8f 100644
> --- a/drivers/gpu/drm/i915/display/intel_vdsc.c
> +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
> @@ -10,6 +10,7 @@
> 
>  #include "i915_drv.h"
>  #include "intel_display_types.h"
> +#include "intel_dsi.h"
>  #include "intel_vdsc.h"
> 
>  enum ROW_INDEX_BPP {
> @@ -844,6 +845,25 @@ static void intel_dsc_pps_configure(struct
> intel_encoder *encoder,
>  	}
>  }
> 
> +static void intel_dsc_dsi_pps_write(struct intel_encoder *encoder,
> +				    const struct intel_crtc_state *crtc_state) {
> +	const struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
> +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> +	struct mipi_dsi_device *dsi;
> +	struct drm_dsc_picture_parameter_set pps;
> +	enum port port;
> +
> +	drm_dsc_pps_payload_pack(&pps, vdsc_cfg);
> +
> +	for_each_dsi_port(port, intel_dsi->ports) {
> +		dsi = intel_dsi->dsi_hosts[port]->device;
> +
> +		mipi_dsi_picture_parameter_set(dsi, &pps);
> +		mipi_dsi_compression_mode(dsi, true);
> +	}
> +}
> +
>  static void intel_dsc_dp_pps_write(struct intel_encoder *encoder,
>  				   const struct intel_crtc_state *crtc_state)  {
> @@ -882,7 +902,10 @@ void intel_dsc_enable(struct intel_encoder
> *encoder,
> 
Slightly out of scope of this patch, but I see that while configuring PPS9, we are using direct macros and not using anything from
vdsc_cfg->rc_model_size and we have not initialized vdsc_cfg-> rc_edge_factor

>  	intel_dsc_pps_configure(encoder, crtc_state);
> 
Other than that, this patch LGTM.
Reviewed-by: Vandita Kulkarni <vandita.kulkarni at intel.com>

Thanks,
Vandita
> -	intel_dsc_dp_pps_write(encoder, crtc_state);
> +	if (encoder->type == INTEL_OUTPUT_DSI)
> +		intel_dsc_dsi_pps_write(encoder, crtc_state);
> +	else
> +		intel_dsc_dp_pps_write(encoder, crtc_state);
> 
>  	if (crtc_state->cpu_transcoder == TRANSCODER_EDP) {
>  		dss_ctl1_reg = DSS_CTL1;
> --
> 2.20.1



More information about the Intel-gfx mailing list