[Intel-gfx] [PATCH xf86-video-intel 2/2] sna: Eliminate sna_mode_wants_tear_free()

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

The modparam checks performed by sna_mode_wants_tear_free() don't
generally work when the server is running as a regular user. Hence
we can't rely on them to indicate whether FBC/PSR/etc is enabled.
A lso the "Panel Self-Refresh" connector property doesn't actually
exist so we can nuke that part as well. Let's just nuke the whole
thing and assume we want dirtyfb always when tearfree is not enabled.

I'll anyway want to enable FBC by default across the board soonish
so the check wouldn't really buy us much (would just exclude i830
and a few old desktop chipsets which don't have FBC hardware).

Additionally if we don't have working dirtyfb we really should
enable tearfree by default because otherwise we're going to
get horrible lag due to missing frontbuffer flushes.

Without WC mmaps we could in theory rely on the hw gtt tracking
except the kernel no longer differentiates between GTT/WC/CPU
access in its software frontbuffer tracking code so it'll just
deactivate FBC even for a GTT mmap and potentially never re-enable
it due to the missing frontbuffer flush from dirtyfb. So dirtyfb
is always needed.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 src/sna/sna_display.c | 59 -------------------------------------------
 src/sna/sna_driver.c  |  8 ++----
 2 files changed, 2 insertions(+), 65 deletions(-)

diff --git a/src/sna/sna_display.c b/src/sna/sna_display.c
index 874292bcab31..966ad9638a2a 100644
--- a/src/sna/sna_display.c
+++ b/src/sna/sna_display.c
@@ -7951,65 +7951,6 @@ bool sna_mode_pre_init(ScrnInfoPtr scrn, struct sna *sna)
 	return scrn->modes != NULL;
 }
 
-bool
-sna_mode_wants_tear_free(struct sna *sna)
-{
-	xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(sna->scrn);
-	bool found = false;
-	FILE *file;
-	int i;
-
-	file = fopen("/sys/module/i915/parameters/enable_fbc", "r");
-	if (file) {
-		int fbc_enabled = 0;
-		int value;
-
-		if (fscanf(file, "%d", &value) == 1)
-			fbc_enabled = value > 0;
-		fclose(file);
-
-		DBG(("%s: module parameter 'enable_fbc' enabled? %d\n",
-		     __FUNCTION__, fbc_enabled));
-
-		if (fbc_enabled)
-			return true;
-	}
-
-	for (i = 0; i < sna->mode.num_real_output; i++) {
-		struct sna_output *output = to_sna_output(config->output[i]);
-		int id = find_property(sna, output, "Panel Self-Refresh");
-		if (id == -1)
-			continue;
-
-		found = true;
-		if (output->prop_values[id] != -1) {
-			DBG(("%s: Panel Self-Refresh detected on %s\n",
-			     __FUNCTION__, config->output[i]->name));
-			return true;
-		}
-	}
-
-	if (!found) {
-		file = fopen("/sys/module/i915/parameters/enable_psr", "r");
-		if (file) {
-			int psr_enabled = 0;
-			int value;
-
-			if (fscanf(file, "%d", &value) == 1)
-				psr_enabled = value > 0;
-			fclose(file);
-
-			DBG(("%s: module parameter 'enable_psr' enabled? %d\n",
-			     __FUNCTION__, psr_enabled));
-
-			if (psr_enabled)
-				return true;
-		}
-	}
-
-	return false;
-}
-
 void
 sna_mode_set_primary(struct sna *sna)
 {
diff --git a/src/sna/sna_driver.c b/src/sna/sna_driver.c
index 4f8895f1eda2..2f61de63072f 100644
--- a/src/sna/sna_driver.c
+++ b/src/sna/sna_driver.c
@@ -459,11 +459,7 @@ static bool enable_tear_free(struct sna *sna)
 	if (sna->flags & SNA_LINEAR_FB)
 		return false;
 
-	/* Under certain conditions, we should enable TearFree by default,
-	 * for example when the hardware requires pageflipping to run within
-	 * its power/performance budget.
-	 */
-	if (sna_mode_wants_tear_free(sna))
+	if (!sna->kgem.has_dirtyfb)
 		return true;
 
 	return ENABLE_TEAR_FREE;
@@ -663,7 +659,7 @@ static Bool sna_pre_init(ScrnInfoPtr scrn, int probe)
 	}
 	scrn->currentMode = scrn->modes;
 
-	if (!setup_tear_free(sna) && sna_mode_wants_tear_free(sna))
+	if (!setup_tear_free(sna))
 		sna->kgem.needs_dirtyfb = sna->kgem.has_dirtyfb;
 
 	xf86SetGamma(scrn, zeros);
-- 
2.23.0