[Intel-gfx] [PATCH 4/5] drm/i915: Introduce intel_crtc_state_reset()
Souza, Jose
jose.souza at intel.com
Tue Dec 10 02:12:23 UTC 2019
On Thu, 2019-11-07 at 16:24 +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> We have a few places where we want to reset a crtc state to its
> default values. Let's add a helper for that. We'll need the new
> __drm_atomic_helper_crtc_state_reset() helper for this to allow
> us to just reset the state itself without clobbering the
> crtc->state pointer.
>
> And while at it let's zero out the whole thing, except a few
> choice member which we'll mark as "invalid". And thanks to this
> we can now nuke intel_crtc_init_scalers().
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 47 +++++++++---------
> --
> 1 file changed, 22 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index e6291841053f..fd4120533c3f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -164,7 +164,6 @@ static void vlv_prepare_pll(struct intel_crtc
> *crtc,
> const struct intel_crtc_state
> *pipe_config);
> static void chv_prepare_pll(struct intel_crtc *crtc,
> const struct intel_crtc_state
> *pipe_config);
> -static void intel_crtc_init_scalers(struct intel_crtc_state
> *crtc_state);
> static void skylake_pfit_enable(const struct intel_crtc_state
> *crtc_state);
> static void ironlake_pfit_disable(const struct intel_crtc_state
> *old_crtc_state);
> static void ironlake_pfit_enable(const struct intel_crtc_state
> *crtc_state);
> @@ -10655,8 +10654,6 @@ static bool haswell_get_pipe_config(struct
> intel_crtc *crtc,
> u64 power_domain_mask;
> bool active;
>
> - intel_crtc_init_scalers(pipe_config);
> -
> pipe_config->master_transcoder = INVALID_TRANSCODER;
>
> power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
> @@ -11704,6 +11701,20 @@ static void ironlake_pch_clock_get(struct
> intel_crtc *crtc,
> &pipe_config->fdi_m_n);
> }
>
> +static void intel_crtc_state_reset(struct intel_crtc_state
> *crtc_state,
> + struct intel_crtc *crtc)
> +{
> + memset(crtc_state, 0, sizeof(*crtc_state));
> +
> + __drm_atomic_helper_crtc_state_reset(&crtc_state->uapi, &crtc-
> >base);
> +
> + crtc_state->cpu_transcoder = INVALID_TRANSCODER;
> + crtc_state->master_transcoder = INVALID_TRANSCODER;
At least master_transcoder is set to invalid again but we can remove
the redundant sets later
Reviewed-by: José Roberto de Souza <jose.souza at intel.com>
> + crtc_state->hsw_workaround_pipe = INVALID_PIPE;
> + crtc_state->output_format = INTEL_OUTPUT_FORMAT_INVALID;
> + crtc_state->scaler_state.scaler_id = -1;
> +}
> +
> /* Returns the currently programmed mode of the given encoder. */
> struct drm_display_mode *
> intel_encoder_current_mode(struct intel_encoder *encoder)
> @@ -11729,7 +11740,7 @@ intel_encoder_current_mode(struct
> intel_encoder *encoder)
> return NULL;
> }
>
> - crtc_state->uapi.crtc = &crtc->base;
> + intel_crtc_state_reset(crtc_state, crtc);
>
> if (!dev_priv->display.get_pipe_config(crtc, crtc_state)) {
> kfree(crtc_state);
> @@ -13577,18 +13588,14 @@ verify_crtc_state(struct intel_crtc *crtc,
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> struct intel_encoder *encoder;
> - struct intel_crtc_state *pipe_config;
> - struct drm_atomic_state *state;
> + struct intel_crtc_state *pipe_config = old_crtc_state;
> + struct drm_atomic_state *state = old_crtc_state->uapi.state;
> bool active;
>
> - state = old_crtc_state->uapi.state;
> __drm_atomic_helper_crtc_destroy_state(&old_crtc_state->uapi);
> intel_crtc_free_hw_state(old_crtc_state);
> -
> - pipe_config = old_crtc_state;
> - memset(pipe_config, 0, sizeof(*pipe_config));
> - pipe_config->uapi.crtc = &crtc->base;
> - pipe_config->uapi.state = state;
> + intel_crtc_state_reset(old_crtc_state, crtc);
> + old_crtc_state->uapi.state = state;
>
> DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.base.id, crtc-
> >base.name);
>
> @@ -15745,15 +15752,6 @@ intel_cursor_plane_create(struct
> drm_i915_private *dev_priv,
> return ERR_PTR(ret);
> }
>
> -static void intel_crtc_init_scalers(struct intel_crtc_state
> *crtc_state)
> -{
> - struct intel_crtc_scaler_state *scaler_state =
> - &crtc_state->scaler_state;
> -
> - memset(scaler_state, 0, sizeof(*scaler_state));
> - scaler_state->scaler_id = -1;
> -}
> -
> #define INTEL_CRTC_FUNCS \
> .gamma_set = drm_atomic_helper_legacy_gamma_set, \
> .set_config = drm_atomic_helper_set_config, \
> @@ -15836,9 +15834,9 @@ static struct intel_crtc
> *intel_crtc_alloc(void)
> return ERR_PTR(-ENOMEM);
> }
>
> - __drm_atomic_helper_crtc_reset(&crtc->base, &crtc_state->uapi);
> - intel_crtc_init_scalers(crtc_state);
> + intel_crtc_state_reset(crtc_state, crtc);
>
> + crtc->base.state = &crtc_state->uapi;
> crtc->config = crtc_state;
>
> return crtc;
> @@ -17414,8 +17412,7 @@ static void
> intel_modeset_readout_hw_state(struct drm_device *dev)
>
> __drm_atomic_helper_crtc_destroy_state(&crtc_state-
> >uapi);
> intel_crtc_free_hw_state(crtc_state);
> - memset(crtc_state, 0, sizeof(*crtc_state));
> - __drm_atomic_helper_crtc_reset(&crtc->base,
> &crtc_state->uapi);
> + intel_crtc_state_reset(crtc_state, crtc);
>
> crtc_state->hw.active = crtc_state->hw.enable =
> dev_priv->display.get_pipe_config(crtc,
> crtc_state);
More information about the Intel-gfx
mailing list