[Intel-gfx] [PATCH 1/2] drm/i915/dsc: fix DSC register selection for ICL DSI transcoders
Manasi Navare
manasi.d.navare at intel.com
Wed Dec 11 22:08:37 UTC 2019
On Wed, Dec 11, 2019 at 06:23:46PM +0200, Jani Nikula wrote:
> ICL eDP and DSI transcoders have a DSC engine separate from the
> pipe. Abstract the register selection and fix it for ICL.
>
> Add a warning for pipe A DSC on ICL; it does not exist.
>
> Cc: Manasi Navare <manasi.d.navare at intel.com>
> Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_vdsc.c | 58 +++++++++++++++--------
> 1 file changed, 38 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
> index ed9048140937..e6f60be9ee84 100644
> --- a/drivers/gpu/drm/i915/display/intel_vdsc.c
> +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
> @@ -353,6 +353,26 @@ bool intel_dsc_source_support(struct intel_encoder *encoder,
> return false;
> }
>
> +static bool is_pipe_dsc(const struct intel_crtc_state *crtc_state)
> +{
> + const struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> + const struct drm_i915_private *i915 = to_i915(crtc->base.dev);
> + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> +
> + if (INTEL_GEN(i915) >= 12)
> + return true;
> +
> + if (cpu_transcoder == TRANSCODER_EDP ||
> + cpu_transcoder == TRANSCODER_DSI_0 ||
> + cpu_transcoder == TRANSCODER_DSI_1)
> + return false;
> +
> + /* There's no pipe A DSC engine on ICL */
> + WARN_ON(crtc->pipe == PIPE_A);
> +
> + return true;
> +}
> +
So for >=Gen12, it will always go to the else part in PPS configure and use
ICL_DSC0_PICTURE_PARAMETER_SET_1 register per pipe.
Right now this only calculates register addresses for PIPE_B and PIPE_C for ICL but
no register defs for DSC_PPS for GEN >=12
As far as the selection logic this patch looks good and will work for <12 GEN , but it will
currently fail for DSC on >=12
Lucas, Jose - Is thsi something anyone's looking at adding?
Regards
Manasi
> int intel_dsc_compute_params(struct intel_encoder *encoder,
> struct intel_crtc_state *pipe_config)
> {
> @@ -471,7 +491,6 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> const struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
> enum pipe pipe = crtc->pipe;
> - enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> u32 pps_val = 0;
> u32 rc_buf_thresh_dword[4];
> u32 rc_range_params_dword[8];
> @@ -492,7 +511,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> if (vdsc_cfg->vbr_enable)
> pps_val |= DSC_VBR_ENABLE;
> DRM_INFO("PPS0 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_0, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -511,7 +530,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> pps_val = 0;
> pps_val |= DSC_BPP(vdsc_cfg->bits_per_pixel);
> DRM_INFO("PPS1 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_1, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -531,7 +550,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> pps_val |= DSC_PIC_HEIGHT(vdsc_cfg->pic_height) |
> DSC_PIC_WIDTH(vdsc_cfg->pic_width / num_vdsc_instances);
> DRM_INFO("PPS2 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_2, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -551,7 +570,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> pps_val |= DSC_SLICE_HEIGHT(vdsc_cfg->slice_height) |
> DSC_SLICE_WIDTH(vdsc_cfg->slice_width);
> DRM_INFO("PPS3 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_3, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -571,7 +590,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> pps_val |= DSC_INITIAL_XMIT_DELAY(vdsc_cfg->initial_xmit_delay) |
> DSC_INITIAL_DEC_DELAY(vdsc_cfg->initial_dec_delay);
> DRM_INFO("PPS4 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_4, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -591,7 +610,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> pps_val |= DSC_SCALE_INC_INT(vdsc_cfg->scale_increment_interval) |
> DSC_SCALE_DEC_INT(vdsc_cfg->scale_decrement_interval);
> DRM_INFO("PPS5 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_5, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -613,7 +632,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> DSC_FLATNESS_MIN_QP(vdsc_cfg->flatness_min_qp) |
> DSC_FLATNESS_MAX_QP(vdsc_cfg->flatness_max_qp);
> DRM_INFO("PPS6 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_6, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -633,7 +652,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> pps_val |= DSC_SLICE_BPG_OFFSET(vdsc_cfg->slice_bpg_offset) |
> DSC_NFL_BPG_OFFSET(vdsc_cfg->nfl_bpg_offset);
> DRM_INFO("PPS7 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_7, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -653,7 +672,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> pps_val |= DSC_FINAL_OFFSET(vdsc_cfg->final_offset) |
> DSC_INITIAL_OFFSET(vdsc_cfg->initial_offset);
> DRM_INFO("PPS8 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_8, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -673,7 +692,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> pps_val |= DSC_RC_MODEL_SIZE(DSC_RC_MODEL_SIZE_CONST) |
> DSC_RC_EDGE_FACTOR(DSC_RC_EDGE_FACTOR_CONST);
> DRM_INFO("PPS9 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_9, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -695,7 +714,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> DSC_RC_TARGET_OFF_HIGH(DSC_RC_TGT_OFFSET_HI_CONST) |
> DSC_RC_TARGET_OFF_LOW(DSC_RC_TGT_OFFSET_LO_CONST);
> DRM_INFO("PPS10 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_10, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -718,7 +737,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> DSC_SLICE_ROW_PER_FRAME(vdsc_cfg->pic_height /
> vdsc_cfg->slice_height);
> DRM_INFO("PPS16 = 0x%08x\n", pps_val);
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_PICTURE_PARAMETER_SET_16, pps_val);
> /*
> * If 2 VDSC instances are needed, configure PPS for second
> @@ -742,7 +761,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> DRM_INFO(" RC_BUF_THRESH%d = 0x%08x\n", i,
> rc_buf_thresh_dword[i / 4]);
> }
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_RC_BUF_THRESH_0, rc_buf_thresh_dword[0]);
> I915_WRITE(DSCA_RC_BUF_THRESH_0_UDW, rc_buf_thresh_dword[1]);
> I915_WRITE(DSCA_RC_BUF_THRESH_1, rc_buf_thresh_dword[2]);
> @@ -791,7 +810,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
> DRM_INFO(" RC_RANGE_PARAM_%d = 0x%08x\n", i,
> rc_range_params_dword[i / 2]);
> }
> - if (cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> I915_WRITE(DSCA_RC_RANGE_PARAMETERS_0,
> rc_range_params_dword[0]);
> I915_WRITE(DSCA_RC_RANGE_PARAMETERS_0_UDW,
> @@ -870,7 +889,6 @@ void intel_dsc_get_config(struct intel_encoder *encoder,
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
> struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> - enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> enum pipe pipe = crtc->pipe;
> enum intel_display_power_domain power_domain;
> intel_wakeref_t wakeref;
> @@ -885,7 +903,7 @@ void intel_dsc_get_config(struct intel_encoder *encoder,
> if (!wakeref)
> return;
>
> - if (crtc_state->cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> dss_ctl1 = I915_READ(DSS_CTL1);
> dss_ctl2 = I915_READ(DSS_CTL2);
> } else {
> @@ -903,7 +921,7 @@ void intel_dsc_get_config(struct intel_encoder *encoder,
> /* FIXME: add more state readout as needed */
>
> /* PPS1 */
> - if (cpu_transcoder == TRANSCODER_EDP)
> + if (!is_pipe_dsc(crtc_state))
> val = I915_READ(DSCA_PICTURE_PARAMETER_SET_1);
> else
> val = I915_READ(ICL_DSC0_PICTURE_PARAMETER_SET_1(pipe));
> @@ -975,7 +993,7 @@ void intel_dsc_enable(struct intel_encoder *encoder,
> else
> intel_dsc_dp_pps_write(encoder, crtc_state);
>
> - if (crtc_state->cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(crtc_state)) {
> dss_ctl1_reg = DSS_CTL1;
> dss_ctl2_reg = DSS_CTL2;
> } else {
> @@ -1002,7 +1020,7 @@ void intel_dsc_disable(const struct intel_crtc_state *old_crtc_state)
> if (!old_crtc_state->dsc.compression_enable)
> return;
>
> - if (old_crtc_state->cpu_transcoder == TRANSCODER_EDP) {
> + if (!is_pipe_dsc(old_crtc_state)) {
> dss_ctl1_reg = DSS_CTL1;
> dss_ctl2_reg = DSS_CTL2;
> } else {
> --
> 2.20.1
>
More information about the Intel-gfx
mailing list