[Intel-gfx] [PATCH 1/3] drm/i915/dp: Make sure all tiled connectors get added to the state with full modeset
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri Dec 13 20:05:49 UTC 2019
On Wed, Dec 11, 2019 at 01:14:23PM -0800, Manasi Navare wrote:
> In case of tiled displays, all the tiles are linke dto each other
> for transcoder port sync. So in intel_atomic_check() we need to make
> sure that we add all the tiles to the modeset and if one of the
> tiles needs a full modeset then mark all other tiles for a full modeset.
>
> Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: José Roberto de Souza <jose.souza at intel.com>
> Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 78 ++++++++++++++++++++
> 1 file changed, 78 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 803993a01ca7..7263eaa66cda 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14066,6 +14066,80 @@ static int intel_atomic_check_crtcs(struct intel_atomic_state *state)
> return 0;
> }
>
> +static int
> +intel_dp_modeset_all_tiles(struct drm_i915_private *dev_priv,
> + struct intel_atomic_state *state, int tile_grp_id)
> +{
> + struct drm_connector *conn_iter;
'connector'
> + struct drm_connector_list_iter conn_list_iter;
> + struct drm_crtc_state *crtc_state;
crtc_state has needlessly wide scope.
> +
> + drm_connector_list_iter_begin(&dev_priv->drm, &conn_list_iter);
> + drm_for_each_connector_iter(conn_iter, &conn_list_iter) {
> + struct drm_connector_state *conn_iter_state;
'conn_state' is the most popular name.
> +
> + if (!conn_iter->has_tile)
> + continue;
> + conn_iter_state = drm_atomic_get_connector_state(&state->base,
> + conn_iter);
> + if (IS_ERR(conn_iter_state)) {
> + drm_connector_list_iter_end(&conn_list_iter);
> + return PTR_ERR(conn_iter_state);
> + }
> +
> + if (!conn_iter_state->crtc)
> + continue;
> +
> + if (conn_iter->tile_group->id != tile_grp_id)
> + continue;
The tile group check should be part of the same if with the has_tile
check.
> +
> + crtc_state = drm_atomic_get_crtc_state(&state->base, conn_iter_state->crtc);
> + if (IS_ERR(crtc_state)) {
> + drm_connector_list_iter_end(&conn_list_iter);
> + return PTR_ERR(conn_iter_state);
> + }
> + crtc_state->mode_changed = true;
> + }
> + drm_connector_list_iter_end(&conn_list_iter);
> +
> + return 0;
> +}
> +
> +static int
> +intel_dp_atomic_trans_port_sync_check(struct drm_i915_private *dev_priv,
Pointless variable. Can be extracted from the atomic state.
> + struct intel_atomic_state *state)
> +{
> + struct drm_connector *connector;
> + struct drm_crtc_state *crtc_state;
> + struct drm_connector_state *connector_state;
> + int i, ret, tile_grp_id = 0;
tile_grp_id is rather pointless. crtc_state and ret can move into
tighter scope. And the next suggestion allows you to kill crtc_state
entirely...
> +
> + if (INTEL_GEN(dev_priv) < 11)
> + return 0;
> +
> + /* Is tiled, mark all other tiled CRTCs as needing a modeset */
> + for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
> + if (!connector->has_tile)
> + continue;
> + if (connector_state->crtc &&
> + tile_grp_id != connector->tile_group->id) {
> + crtc_state = drm_atomic_get_new_crtc_state(&state->base,
> + connector_state->crtc);
> + if (!drm_atomic_crtc_needs_modeset(crtc_state))
> + continue;
This should to be able to be shortened to just intel_connector_needs_modeset().
> +
> + tile_grp_id = connector->tile_group->id;
> + } else
> + continue;
> +
> + ret = intel_dp_modeset_all_tiles(dev_priv, state, tile_grp_id);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> /**
> * intel_atomic_check - validate state object
> * @dev: drm device
> @@ -14093,6 +14167,10 @@ static int intel_atomic_check(struct drm_device *dev,
> if (ret)
> goto fail;
>
> + ret = intel_dp_atomic_trans_port_sync_check(dev_priv, state);
> + if (ret)
> + goto fail;
We should probably do this from the connector .atomic_check() hook if
Jose is going to do the MST thing that way. But no real problem doing
here I think.
> +
> for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> new_crtc_state, i) {
> if (!needs_modeset(new_crtc_state)) {
> --
> 2.19.1
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list