[Intel-gfx] [PATCH 3/3] drm/i915/dp: Disable Port sync mode correctly on teardown

[Manasi Navare]

On Fri, Dec 13, 2019 at 10:06:37PM +0200, Ville Syrjälä wrote:
> On Wed, Dec 11, 2019 at 01:14:25PM -0800, Manasi Navare wrote:
> > While clearing the Ports ync mode enable and master select bits
> > we need to make sure that we perform a RMW for disable else
> > it sets the other bits casuing unwanted sideeffects.
> > 
> > Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Cc: Jani Nikula <jani.nikula at intel.com>
> > Fixes: 51528afe7c5e ("drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence")
> > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_display.c | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index c0a2dab3fe67..3fccda0f1f36 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -4599,7 +4599,8 @@ static void icl_disable_transcoder_port_sync(const struct intel_crtc_state *old_
> >  		      transcoder_name(old_crtc_state->cpu_transcoder));
> >  
> >  	reg = TRANS_DDI_FUNC_CTL2(old_crtc_state->cpu_transcoder);
> > -	trans_ddi_func_ctl2_val = ~(PORT_SYNC_MODE_ENABLE |
> > +	trans_ddi_func_ctl2_val = I915_READ(reg);
> > +	trans_ddi_func_ctl2_val &= ~(PORT_SYNC_MODE_ENABLE |
> >  				    PORT_SYNC_MODE_MASTER_SELECT_MASK);
> >  	I915_WRITE(reg, trans_ddi_func_ctl2_val);
> 
> I915_WRITE(TRANS_DDI_FUNC_CTL2, 0);

So not even consider the other values that might have been set in this reg?
You would prefer setting this to 0 directly?
Right now i do see that no other bits are set, but things can change when we
start using DSI port sync mode or genlock mode etc.

Manasi

> 
> >  }
> > -- 
> > 2.19.1
> 
> -- 
> Ville Syrjälä
> Intel