[Intel-gfx] [PATCH 4/5] drm/i915/dsi: Move Crystal Cove PMIC panel GPIO lookup from mfd to the i915 driver

[Linus Walleij]

On Sun, Dec 15, 2019 at 5:38 PM Hans de Goede <hdegoede at redhat.com> wrote:

> Move the Crystal Cove PMIC panel GPIO lookup-table from
> drivers/mfd/intel_soc_pmic_core.c to the i915 driver.
>
> The moved looked-up table is adding a GPIO lookup to the i915 PCI
> device and the GPIO subsys allows only one lookup table per device,
>
> The intel_soc_pmic_core.c code only adds lookup-table entries for the
> PMIC panel GPIO (as it deals only with the PMIC), but we also need to be
> able to access some GPIOs on the SoC itself, which requires entries for
> these GPIOs in the lookup-table.
>
> Since the lookup-table is attached to the i915 PCI device it really
> should be part of the i915 driver, this will also allow us to extend
> it with GPIOs from other sources when necessary.
>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>

Looks OK to me
Acked-by: Linus Walleij <linus.walleij at linaro.org>

But Lee & Andy should have a final word on this.

Yours,
Linus Walleij