[Intel-gfx] [PATCH 4/5] drm/i915/dsi: Move Crystal Cove PMIC panel GPIO lookup from mfd to the i915 driver

Mon Dec 16 13:13:24 UTC 2019

Hi,

On 16-12-2019 13:16, Andy Shevchenko wrote:
> On Sun, Dec 15, 2019 at 05:38:09PM +0100, Hans de Goede wrote:
>> Move the Crystal Cove PMIC panel GPIO lookup-table from
>> drivers/mfd/intel_soc_pmic_core.c to the i915 driver.
>>
>> The moved looked-up table is adding a GPIO lookup to the i915 PCI
>> device and the GPIO subsys allows only one lookup table per device,
>>
>> The intel_soc_pmic_core.c code only adds lookup-table entries for the
>> PMIC panel GPIO (as it deals only with the PMIC), but we also need to be
>> able to access some GPIOs on the SoC itself, which requires entries for
>> these GPIOs in the lookup-table.
>>
>> Since the lookup-table is attached to the i915 PCI device it really
>> should be part of the i915 driver, this will also allow us to extend
>> it with GPIOs from other sources when necessary.
> 
> Reviewed-by: Andy Shevchenko <andriy.shevchenko at intel.com>

Thanks.

> One nit below.
> 
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>> ---
>>   drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 23 +++++++++++++++++++-
>>   drivers/mfd/intel_soc_pmic_core.c            | 19 ----------------
>>   2 files changed, 22 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
>> index 027970348b22..847f04eec2a1 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
>> @@ -25,6 +25,7 @@
>>    */
>>   
>>   #include <linux/gpio/consumer.h>
>> +#include <linux/gpio/machine.h>
>>   #include <linux/mfd/intel_soc_pmic.h>
>>   #include <linux/slab.h>
>>   
>> @@ -686,8 +687,18 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>>   
>>   /*
>>    * On some BYT/CHT devs some sequences are incomplete and we need to manually
>> - * control some GPIOs.
>> + * control some GPIOs. We need to add a GPIO lookup table before we get these.
>>    */
>> +static struct gpiod_lookup_table pmic_panel_gpio_table = {
>> +	/* Intel GFX is consumer */
>> +	.dev_id = "0000:00:02.0",
>> +	.table = {
>> +		/* Panel EN/DISABLE */
>> +		GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH),
> 
>> +		{ },
> 
> Usually we don't put comma in terminator kind of lines. (Yes I see that it is
> in original code, but we may have a chance to fix it without additional churn).
> Rationale is to prevent some weird issues (like wrong conflict resolution)
> where record may appear after terminator line and will be compiled correctly.

I need to respin the set because of the pinctrl map unregister thingie anyways,
so I have fixed this for v2.

Regards,

Hans

> 
>> +	},
>> +};
>> +
>>   void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on)
>>   {
>>   	struct drm_device *dev = intel_dsi->base.base.dev;
>> @@ -697,6 +708,8 @@ void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on)
>>   
>>   	if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
>>   	    (mipi_config->pwm_blc == PPS_BLC_PMIC)) {
>> +		gpiod_add_lookup_table(&pmic_panel_gpio_table);
>> +
>>   		intel_dsi->gpio_panel = gpiod_get(dev->dev, "panel", flags);
>>   		if (IS_ERR(intel_dsi->gpio_panel)) {
>>   			DRM_ERROR("Failed to own gpio for panel control\n");
>> @@ -707,8 +720,16 @@ void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on)
>>   
>>   void intel_dsi_vbt_gpio_cleanup(struct intel_dsi *intel_dsi)
>>   {
>> +	struct drm_device *dev = intel_dsi->base.base.dev;
>> +	struct drm_i915_private *dev_priv = to_i915(dev);
>> +	struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
>> +
>>   	if (intel_dsi->gpio_panel) {
>>   		gpiod_put(intel_dsi->gpio_panel);
>>   		intel_dsi->gpio_panel = NULL;
>>   	}
>> +
>> +	if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
>> +	    (mipi_config->pwm_blc == PPS_BLC_PMIC))
>> +		gpiod_remove_lookup_table(&pmic_panel_gpio_table);
>>   }
>> diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c
>> index 47188df3080d..ddd64f9e3341 100644
>> --- a/drivers/mfd/intel_soc_pmic_core.c
>> +++ b/drivers/mfd/intel_soc_pmic_core.c
>> @@ -9,8 +9,6 @@
>>    */
>>   
>>   #include <linux/acpi.h>
>> -#include <linux/gpio/consumer.h>
>> -#include <linux/gpio/machine.h>
>>   #include <linux/i2c.h>
>>   #include <linux/interrupt.h>
>>   #include <linux/module.h>
>> @@ -25,17 +23,6 @@
>>   #define BYT_CRC_HRV		2
>>   #define CHT_CRC_HRV		3
>>   
>> -/* Lookup table for the Panel Enable/Disable line as GPIO signals */
>> -static struct gpiod_lookup_table panel_gpio_table = {
>> -	/* Intel GFX is consumer */
>> -	.dev_id = "0000:00:02.0",
>> -	.table = {
>> -		/* Panel EN/DISABLE */
>> -		GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH),
>> -		{ },
>> -	},
>> -};
>> -
>>   /* PWM consumed by the Intel GFX */
>>   static struct pwm_lookup crc_pwm_lookup[] = {
>>   	PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_pmic_backlight", 0, PWM_POLARITY_NORMAL),
>> @@ -96,9 +83,6 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
>>   	if (ret)
>>   		dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret);
>>   
>> -	/* Add lookup table binding for Panel Control to the GPIO Chip */
>> -	gpiod_add_lookup_table(&panel_gpio_table);
>> -
>>   	/* Add lookup table for crc-pwm */
>>   	pwm_add_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup));
>>   
>> @@ -121,9 +105,6 @@ static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c)
>>   
>>   	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
>>   
>> -	/* Remove lookup table for Panel Control from the GPIO Chip */
>> -	gpiod_remove_lookup_table(&panel_gpio_table);
>> -
>>   	/* remove crc-pwm lookup table */
>>   	pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup));
>>   
>> -- 
>> 2.23.0
>>
> 