[Intel-gfx] [PATCH 1/3] drm/i915/dp: Make sure all tiled connectors get added to the state with full modeset

[Ville Syrjälä]

On Wed, Dec 11, 2019 at 01:14:23PM -0800, Manasi Navare wrote:
> In case of tiled displays, all the tiles are linke dto each other
> for transcoder port sync. So in intel_atomic_check() we need to make
> sure that we add all the tiles to the modeset and if one of the
> tiles needs a full modeset then mark all other tiles for a full modeset.
> 
> Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: José Roberto de Souza <jose.souza at intel.com>
> Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 78 ++++++++++++++++++++
>  1 file changed, 78 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 803993a01ca7..7263eaa66cda 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14066,6 +14066,80 @@ static int intel_atomic_check_crtcs(struct intel_atomic_state *state)
>  	return 0;
>  }
>  
> +static int
> +intel_dp_modeset_all_tiles(struct drm_i915_private *dev_priv,
> +			   struct intel_atomic_state *state, int tile_grp_id)
> +{
> +	struct drm_connector *conn_iter;
> +	struct drm_connector_list_iter conn_list_iter;
> +	struct drm_crtc_state *crtc_state;
> +
> +	drm_connector_list_iter_begin(&dev_priv->drm, &conn_list_iter);
> +	drm_for_each_connector_iter(conn_iter, &conn_list_iter) {
> +		struct drm_connector_state *conn_iter_state;
> +
> +		if (!conn_iter->has_tile)
> +			continue;
> +		conn_iter_state = drm_atomic_get_connector_state(&state->base,
> +								 conn_iter);
> +		if (IS_ERR(conn_iter_state)) {
> +			drm_connector_list_iter_end(&conn_list_iter);
> +			return PTR_ERR(conn_iter_state);
> +		}
> +
> +		if (!conn_iter_state->crtc)
> +			continue;
> +
> +		if (conn_iter->tile_group->id != tile_grp_id)
> +			continue;
> +
> +		crtc_state = drm_atomic_get_crtc_state(&state->base, conn_iter_state->crtc);
> +		if (IS_ERR(crtc_state)) {
> +			drm_connector_list_iter_end(&conn_list_iter);
> +			return PTR_ERR(conn_iter_state);
> +		}
> +		crtc_state->mode_changed = true;
> +	}
> +	drm_connector_list_iter_end(&conn_list_iter);
> +
> +	return 0;
> +}
> +
> +static int
> +intel_dp_atomic_trans_port_sync_check(struct drm_i915_private *dev_priv,
> +				      struct intel_atomic_state *state)
> +{
> +	struct drm_connector *connector;
> +	struct drm_crtc_state *crtc_state;
> +	struct drm_connector_state *connector_state;
> +	int i, ret, tile_grp_id = 0;
> +
> +	if (INTEL_GEN(dev_priv) < 11)
> +		return 0;
> +
> +	/* Is tiled, mark all other tiled CRTCs as needing a modeset */
> +	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
> +		if (!connector->has_tile)
> +			continue;
> +		if (connector_state->crtc &&
> +		    tile_grp_id != connector->tile_group->id) {
> +			crtc_state = drm_atomic_get_new_crtc_state(&state->base,
> +								   connector_state->crtc);
> +			if (!drm_atomic_crtc_needs_modeset(crtc_state))
> +				continue;
> +
> +			tile_grp_id = connector->tile_group->id;
> +		} else
> +			continue;
> +
> +		ret = intel_dp_modeset_all_tiles(dev_priv, state, tile_grp_id);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}

BTW after some more pondering I don't think this alone is sufficient.
The tile information may have already disppeared so I believe we also
need to make sure we mark all currently synced crtcs as needing a
modeset if any of them need a modeset. And I guess that's pretty much
the same function we'll need to handle fastset correctly.

> +
>  /**
>   * intel_atomic_check - validate state object
>   * @dev: drm device
> @@ -14093,6 +14167,10 @@ static int intel_atomic_check(struct drm_device *dev,
>  	if (ret)
>  		goto fail;
>  
> +	ret = intel_dp_atomic_trans_port_sync_check(dev_priv, state);
> +	if (ret)
> +		goto fail;
> +
>  	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
>  					    new_crtc_state, i) {
>  		if (!needs_modeset(new_crtc_state)) {
> -- 
> 2.19.1

-- 
Ville Syrjälä
Intel