[Intel-gfx] [PATCH v4 2/6] drm/i915/tgl: Select master transcoder for MST stream
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Dec 18 20:16:57 UTC 2019
On Wed, Dec 18, 2019 at 08:06:34PM +0000, Souza, Jose wrote:
> On Wed, 2019-12-18 at 21:24 +0200, Ville Syrjälä wrote:
> > On Wed, Dec 18, 2019 at 10:59:06AM -0800, José Roberto de Souza
> > wrote:
> > > On TGL the blending of all the streams have moved from DDI to
> > > transcoder, so now every transcoder working over the same MST port
> > > must
> > > send its stream to a master transcoder and master will send to DDI
> > > respecting the time slots.
> > >
> > > So here adding all the CRTCs that shares the same MST stream if
> > > needed and computing their state again, it will pick the lowest
> > > pipe/transcoder among the ones in the same stream to be master.
> > >
> > > Most of the time skl_commit_modeset_enables() enables pipes in a
> > > crescent order but due DDB overlapping it might not happen, this
> > > scenarios will be handled in the next patch.
> > >
> > > v2:
> > > - Using recently added intel_crtc_state_reset() to set
> > > mst_master_transcoder to invalid transcoder for all non gen12 & MST
> > > code paths
> > > - Setting lowest pipe/transcoder as master, previously it was the
> > > first one but setting a predictable one will help in future MST e
> > > port sync integration
> > > - Moving to intel type as much as we can
> > >
> > > v3:
> > > - Now intel_dp_mst_master_trans_compute() returns the MST master
> > > transcoder
> > > - Replaced stdbool.h by linux/types.h
> > > - Skip the connector being checked in
> > > intel_dp_mst_atomic_master_trans_check()
> > > - Using pipe instead of transcoder to compute MST master
> > >
> > > v4:
> > > - renamed connector_state to conn_state
> > >
> > > BSpec: 50493
> > > BSpec: 49190
> > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > Cc: Lucas De Marchi <lucas.demarchi at intel.com>
> > > Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_atomic.c | 14 ++
> > > drivers/gpu/drm/i915/display/intel_atomic.h | 4 +
> > > drivers/gpu/drm/i915/display/intel_ddi.c | 14 +-
> > > drivers/gpu/drm/i915/display/intel_display.c | 13 +-
> > > .../drm/i915/display/intel_display_types.h | 3 +
> > > drivers/gpu/drm/i915/display/intel_dp_mst.c | 143
> > > ++++++++++++++++--
> > > drivers/gpu/drm/i915/display/intel_dp_mst.h | 5 +
> > > 7 files changed, 183 insertions(+), 13 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_atomic.c
> > > b/drivers/gpu/drm/i915/display/intel_atomic.c
> > > index b7dda18b6f29..0eb973f65977 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_atomic.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_atomic.c
> > > @@ -192,6 +192,20 @@ intel_connector_needs_modeset(struct
> > > intel_atomic_state *state,
> > >
> > > new_conn_state->crtc)));
> > > }
> > >
> > > +struct intel_digital_connector_state *
> > > +intel_atomic_get_digital_connector_state(struct intel_atomic_state
> > > *state,
> > > + struct intel_connector
> > > *connector)
> > > +{
> > > + struct drm_connector_state *conn_state;
> > > +
> > > + conn_state = drm_atomic_get_connector_state(&state->base,
> > > + &connector->base);
> > > + if (IS_ERR(conn_state))
> > > + return ERR_CAST(conn_state);
> > > +
> > > + return to_intel_digital_connector_state(conn_state);
> > > +}
> > > +
> > > /**
> > > * intel_crtc_duplicate_state - duplicate crtc state
> > > * @crtc: drm crtc
> > > diff --git a/drivers/gpu/drm/i915/display/intel_atomic.h
> > > b/drivers/gpu/drm/i915/display/intel_atomic.h
> > > index a7d1a8576c48..74c749dbfb4f 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_atomic.h
> > > +++ b/drivers/gpu/drm/i915/display/intel_atomic.h
> > > @@ -17,6 +17,7 @@ struct drm_device;
> > > struct drm_i915_private;
> > > struct drm_property;
> > > struct intel_atomic_state;
> > > +struct intel_connector;
> > > struct intel_crtc;
> > > struct intel_crtc_state;
> > >
> > > @@ -34,6 +35,9 @@ struct drm_connector_state *
> > > intel_digital_connector_duplicate_state(struct drm_connector
> > > *connector);
> > > bool intel_connector_needs_modeset(struct intel_atomic_state
> > > *state,
> > > struct drm_connector *connector);
> > > +struct intel_digital_connector_state *
> > > +intel_atomic_get_digital_connector_state(struct intel_atomic_state
> > > *state,
> > > + struct intel_connector
> > > *connector);
> > >
> > > struct drm_crtc_state *intel_crtc_duplicate_state(struct drm_crtc
> > > *crtc);
> > > void intel_crtc_destroy_state(struct drm_crtc *crtc,
> > > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> > > b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > index fa40ba7cbcad..9d99ec82d072 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > @@ -1899,8 +1899,13 @@ intel_ddi_transcoder_func_reg_val_get(const
> > > struct intel_crtc_state *crtc_state)
> > > temp |= TRANS_DDI_MODE_SELECT_DP_MST;
> > > temp |= DDI_PORT_WIDTH(crtc_state->lane_count);
> > >
> > > - if (INTEL_GEN(dev_priv) >= 12)
> > > - temp |=
> > > TRANS_DDI_MST_TRANSPORT_SELECT(crtc_state->cpu_transcoder);
> > > + if (INTEL_GEN(dev_priv) >= 12) {
> > > + enum transcoder master;
> > > +
> > > + master = crtc_state->mst_master_transcoder;
> > > + WARN_ON(master == INVALID_TRANSCODER);
> > > + temp |= TRANS_DDI_MST_TRANSPORT_SELECT(master);
> > > + }
> > > } else {
> > > temp |= TRANS_DDI_MODE_SELECT_DP_SST;
> > > temp |= DDI_PORT_WIDTH(crtc_state->lane_count);
> > > @@ -4400,6 +4405,11 @@ void intel_ddi_get_config(struct
> > > intel_encoder *encoder,
> > > pipe_config->output_types |= BIT(INTEL_OUTPUT_DP_MST);
> > > pipe_config->lane_count =
> > > ((temp & DDI_PORT_WIDTH_MASK) >>
> > > DDI_PORT_WIDTH_SHIFT) + 1;
> > > +
> > > + if (INTEL_GEN(dev_priv) >= 12)
> > > + pipe_config->mst_master_transcoder =
> > > + REG_FIELD_GET(TRANS_DDI_MST_TRA
> > > NSPORT_SELECT_MASK, temp);
> > > +
> > > intel_dp_get_m_n(intel_crtc, pipe_config);
> > > break;
> > > default:
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > index 25bf084427bf..59b3bfe8b721 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -46,6 +46,7 @@
> > > #include "display/intel_crt.h"
> > > #include "display/intel_ddi.h"
> > > #include "display/intel_dp.h"
> > > +#include "display/intel_dp_mst.h"
> > > #include "display/intel_dsi.h"
> > > #include "display/intel_dvo.h"
> > > #include "display/intel_gmbus.h"
> > > @@ -11630,6 +11631,7 @@ static void intel_crtc_state_reset(struct
> > > intel_crtc_state *crtc_state,
> > > crtc_state->hsw_workaround_pipe = INVALID_PIPE;
> > > crtc_state->output_format = INTEL_OUTPUT_FORMAT_INVALID;
> > > crtc_state->scaler_state.scaler_id = -1;
> > > + crtc_state->mst_master_transcoder = INVALID_TRANSCODER;
> > > }
> > >
> > > /* Returns the currently programmed mode of the given encoder. */
> > > @@ -12477,6 +12479,9 @@ static void intel_dump_pipe_config(const
> > > struct intel_crtc_state *pipe_config,
> > > pipe_config->csc_mode, pipe_config-
> > > >gamma_mode,
> > > pipe_config->gamma_enable, pipe_config-
> > > >csc_enable);
> > >
> > > + DRM_DEBUG_KMS("MST master transcoder: %s\n",
> > > + transcoder_name(pipe_config-
> > > >mst_master_transcoder));
> > > +
> > > dump_planes:
> > > if (!state)
> > > return;
> > > @@ -12618,6 +12623,7 @@ intel_crtc_prepare_cleared_state(struct
> > > intel_crtc_state *crtc_state)
> > > memcpy(saved_state->icl_port_dplls, crtc_state->icl_port_dplls,
> > > sizeof(saved_state->icl_port_dplls));
> > > saved_state->crc_enabled = crtc_state->crc_enabled;
> > > + saved_state->mst_master_transcoder = INVALID_TRANSCODER;
> >
> > That's redundant now?
>
> No, we don't call intel_crtc_state_reset() when computing state.
> Did not changed that because we are copying a bunch of stuff from the
> saved_state.
Doh. I think we should be able just call the reset thing in saved_state
here?
Oh, and we seem to have another one in vlv_force_pll_on(). Maybe we
should even add a intel_crtc_state_alloc() or something which would
give us a properly initialized fresh state.
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list