[Intel-gfx] [PATCH v2 08/15] drm/i915: Skip rotated offset adjustment for unsupported modifiers
Imre Deak
imre.deak at intel.com
Wed Dec 18 23:34:00 UTC 2019
From: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
During framebuffer creation, we pre-compute offsets for 90/270 plane
rotation. However, only Y and Yf modifiers support 90/270 rotation. So,
skip the calculations for other modifiers.
To keep the gem buffer size check still working for tiled planes, factor
out the logic needed for rotation setup and skip only this part for
tiled planes other than Y/Yf.
v2: Add a bounds check WARN for the rotation info array.
v3: Keep the gem buffer size check working for tiled planes.
Cc: Matt Roper <matthew.d.roper at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 117 ++++++++++++-------
1 file changed, 76 insertions(+), 41 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 3180c1817b60..9c0f22410c4a 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -2863,12 +2863,71 @@ intel_fb_check_ccs_xy(struct drm_framebuffer *fb, int x, int y)
return 0;
}
+/*
+ * Setup the rotated view for an FB plane and return the size the GTT mapping
+ * requires for this view.
+ */
+static u32
+setup_fb_rotation(int plane, const struct intel_remapped_plane_info *plane_info,
+ u32 gtt_offset_rotated, int x, int y,
+ unsigned int width, unsigned int height,
+ unsigned int tile_size,
+ unsigned int tile_width, unsigned int tile_height,
+ struct drm_framebuffer *fb)
+{
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct intel_rotation_info *rot_info = &intel_fb->rot_info;
+ unsigned int pitch_tiles;
+ struct drm_rect r;
+
+ if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
+ fb->modifier != I915_FORMAT_MOD_Yf_TILED)
+ return 0;
+
+ if (WARN_ON(plane >= ARRAY_SIZE(rot_info->plane)))
+ return 0;
+
+ rot_info->plane[plane] = *plane_info;
+
+ intel_fb->rotated[plane].pitch = plane_info->height * tile_height;
+
+ /* rotate the x/y offsets to match the GTT view */
+ drm_rect_init(&r, x, y, width, height);
+ drm_rect_rotate(&r,
+ plane_info->width * tile_width,
+ plane_info->height * tile_height,
+ DRM_MODE_ROTATE_270);
+ x = r.x1;
+ y = r.y1;
+
+ /* rotate the tile dimensions to match the GTT view */
+ pitch_tiles = intel_fb->rotated[plane].pitch / tile_height;
+ swap(tile_width, tile_height);
+
+ /*
+ * We only keep the x/y offsets, so push all of the
+ * gtt offset into the x/y offsets.
+ */
+ intel_adjust_tile_offset(&x, &y,
+ tile_width, tile_height,
+ tile_size, pitch_tiles,
+ gtt_offset_rotated * tile_size, 0);
+
+ /*
+ * First pixel of the framebuffer from
+ * the start of the rotated gtt mapping.
+ */
+ intel_fb->rotated[plane].x = x;
+ intel_fb->rotated[plane].y = y;
+
+ return plane_info->width * plane_info->height;
+}
+
static int
intel_fill_fb_info(struct drm_i915_private *dev_priv,
struct drm_framebuffer *fb)
{
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- struct intel_rotation_info *rot_info = &intel_fb->rot_info;
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
u32 gtt_offset_rotated = 0;
unsigned int max_size = 0;
@@ -2926,23 +2985,21 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
tile_size);
offset /= tile_size;
+ /* Y or Yf modifiers required for 90/270 rotation */
if (!is_surface_linear(fb, i)) {
+ struct intel_remapped_plane_info plane_info;
unsigned int tile_width, tile_height;
- unsigned int pitch_tiles;
- struct drm_rect r;
intel_tile_dims(fb, i, &tile_width, &tile_height);
- rot_info->plane[i].offset = offset;
- rot_info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i], tile_width * cpp);
- rot_info->plane[i].width = DIV_ROUND_UP(x + width, tile_width);
- rot_info->plane[i].height = DIV_ROUND_UP(y + height, tile_height);
-
- intel_fb->rotated[i].pitch =
- rot_info->plane[i].height * tile_height;
+ plane_info.offset = offset;
+ plane_info.stride = DIV_ROUND_UP(fb->pitches[i],
+ tile_width * cpp);
+ plane_info.width = DIV_ROUND_UP(x + width, tile_width);
+ plane_info.height = DIV_ROUND_UP(y + height, tile_height);
/* how many tiles does this plane need */
- size = rot_info->plane[i].stride * rot_info->plane[i].height;
+ size = plane_info.stride * plane_info.height;
/*
* If the plane isn't horizontally tile aligned,
* we need one more tile.
@@ -2950,36 +3007,13 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
if (x != 0)
size++;
- /* rotate the x/y offsets to match the GTT view */
- drm_rect_init(&r, x, y, width, height);
- drm_rect_rotate(&r,
- rot_info->plane[i].width * tile_width,
- rot_info->plane[i].height * tile_height,
- DRM_MODE_ROTATE_270);
- x = r.x1;
- y = r.y1;
-
- /* rotate the tile dimensions to match the GTT view */
- pitch_tiles = intel_fb->rotated[i].pitch / tile_height;
- swap(tile_width, tile_height);
-
- /*
- * We only keep the x/y offsets, so push all of the
- * gtt offset into the x/y offsets.
- */
- intel_adjust_tile_offset(&x, &y,
- tile_width, tile_height,
- tile_size, pitch_tiles,
- gtt_offset_rotated * tile_size, 0);
-
- gtt_offset_rotated += rot_info->plane[i].width * rot_info->plane[i].height;
-
- /*
- * First pixel of the framebuffer from
- * the start of the rotated gtt mapping.
- */
- intel_fb->rotated[i].x = x;
- intel_fb->rotated[i].y = y;
+ gtt_offset_rotated +=
+ setup_fb_rotation(i, &plane_info,
+ gtt_offset_rotated,
+ x, y, width, height,
+ tile_size,
+ tile_width, tile_height,
+ fb);
} else {
size = DIV_ROUND_UP((y + height) * fb->pitches[i] +
x * cpp, tile_size);
@@ -3063,6 +3097,7 @@ intel_plane_remap_gtt(struct intel_plane_state *plane_state)
DRM_MODE_ROTATE_0, tile_size);
offset /= tile_size;
+ WARN_ON(i >= ARRAY_SIZE(info->plane));
info->plane[i].offset = offset;
info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i],
tile_width * cpp);
--
2.22.0
More information about the Intel-gfx
mailing list