[Intel-gfx] [PATCH 1/3] drm/i915/dp: Make sure all tiled connectors get added to the state with full modeset
Manasi Navare
manasi.d.navare at intel.com
Thu Dec 19 02:37:47 UTC 2019
Hi Ville,
I double checke that I can use new_crtc_state in modeset_synced_crtcs to add all synced crtcs to modeset
That is working as expected so that the same function can be reused after fastset check to override
mode_changed to true.
Here's what I have:
static int
intel_dp_modeset_synced_crtcs(struct intel_atomic_state *state)
{
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
struct intel_crtc_state *old_crtc_state, *new_crtc_state;
struct intel_crtc *crtc;
int i;
for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
new_crtc_state, i) {
if(is_trans_port_sync_mode(new_crtc_state))
DRM_DEBUG_KMS("\n Adding CRTC %d:%s to modeset since old crtc state master trans = %s, slave mask = %d, new crtc state master trans = %s slave mask = %d",
crtc->base.base.id,
crtc->base.name,
transcoder_name(old_crtc_state->master_transcoder),
old_crtc_state->sync_mode_slaves_mask,
transcoder_name(new_crtc_state->master_transcoder),
new_crtc_state->sync_mode_slaves_mask);
new_crtc_state->uapi.mode_changed = true;
}
return 0;
}
static int
intel_dp_atomic_check_synced_crtcs(struct intel_atomic_state *state)
{
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
struct intel_crtc_state *old_crtc_state, *new_crtc_state;
struct intel_crtc *crtc;
int i;
for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
new_crtc_state, i) {
if(!is_trans_port_sync_mode(new_crtc_state) ||
!needs_modeset(new_crtc_state))
continue;
intel_dp_modeset_synced_crtcs(state);
}
return 0;
}
I will add this to this patch after thye call to modeset_all_tiles() and submit a new revision.
Regards
Manasi
On Tue, Dec 17, 2019 at 11:04:53AM -0800, Manasi Navare wrote:
> On Tue, Dec 17, 2019 at 12:50:31PM +0200, Ville Syrjälä wrote:
> > On Mon, Dec 16, 2019 at 02:58:13PM -0800, Manasi Navare wrote:
> > > On Mon, Dec 16, 2019 at 02:33:10PM -0800, Manasi Navare wrote:
> > > > On Mon, Dec 16, 2019 at 11:37:38PM +0200, Ville Syrjälä wrote:
> > > > > On Mon, Dec 16, 2019 at 11:13:09AM -0800, Manasi Navare wrote:
> > > > > > On Mon, Dec 16, 2019 at 04:37:38PM +0200, Ville Syrjälä wrote:
> > > > > > > On Wed, Dec 11, 2019 at 01:14:23PM -0800, Manasi Navare wrote:
> > > > > > > > In case of tiled displays, all the tiles are linke dto each other
> > > > > > > > for transcoder port sync. So in intel_atomic_check() we need to make
> > > > > > > > sure that we add all the tiles to the modeset and if one of the
> > > > > > > > tiles needs a full modeset then mark all other tiles for a full modeset.
> > > > > > > >
> > > > > > > > Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > > > > > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > > > > > > Cc: José Roberto de Souza <jose.souza at intel.com>
> > > > > > > > Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
> > > > > > > > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > > > > > > > ---
> > > > > > > > drivers/gpu/drm/i915/display/intel_display.c | 78 ++++++++++++++++++++
> > > > > > > > 1 file changed, 78 insertions(+)
> > > > > > > >
> > > > > > > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > > index 803993a01ca7..7263eaa66cda 100644
> > > > > > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > > @@ -14066,6 +14066,80 @@ static int intel_atomic_check_crtcs(struct intel_atomic_state *state)
> > > > > > > > return 0;
> > > > > > > > }
> > > > > > > >
> > > > > > > > +static int
> > > > > > > > +intel_dp_modeset_all_tiles(struct drm_i915_private *dev_priv,
> > > > > > > > + struct intel_atomic_state *state, int tile_grp_id)
> > > > > > > > +{
> > > > > > > > + struct drm_connector *conn_iter;
> > > > > > > > + struct drm_connector_list_iter conn_list_iter;
> > > > > > > > + struct drm_crtc_state *crtc_state;
> > > > > > > > +
> > > > > > > > + drm_connector_list_iter_begin(&dev_priv->drm, &conn_list_iter);
> > > > > > > > + drm_for_each_connector_iter(conn_iter, &conn_list_iter) {
> > > > > > > > + struct drm_connector_state *conn_iter_state;
> > > > > > > > +
> > > > > > > > + if (!conn_iter->has_tile)
> > > > > > > > + continue;
> > > > > > > > + conn_iter_state = drm_atomic_get_connector_state(&state->base,
> > > > > > > > + conn_iter);
> > > > > > > > + if (IS_ERR(conn_iter_state)) {
> > > > > > > > + drm_connector_list_iter_end(&conn_list_iter);
> > > > > > > > + return PTR_ERR(conn_iter_state);
> > > > > > > > + }
> > > > > > > > +
> > > > > > > > + if (!conn_iter_state->crtc)
> > > > > > > > + continue;
> > > > > > > > +
> > > > > > > > + if (conn_iter->tile_group->id != tile_grp_id)
> > > > > > > > + continue;
> > > > > > > > +
> > > > > > > > + crtc_state = drm_atomic_get_crtc_state(&state->base, conn_iter_state->crtc);
> > > > > > > > + if (IS_ERR(crtc_state)) {
> > > > > > > > + drm_connector_list_iter_end(&conn_list_iter);
> > > > > > > > + return PTR_ERR(conn_iter_state);
> > > > > > > > + }
> > > > > > > > + crtc_state->mode_changed = true;
> > > > > > > > + }
> > > > > > > > + drm_connector_list_iter_end(&conn_list_iter);
> > > > > > > > +
> > > > > > > > + return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int
> > > > > > > > +intel_dp_atomic_trans_port_sync_check(struct drm_i915_private *dev_priv,
> > > > > > > > + struct intel_atomic_state *state)
> > > > > > > > +{
> > > > > > > > + struct drm_connector *connector;
> > > > > > > > + struct drm_crtc_state *crtc_state;
> > > > > > > > + struct drm_connector_state *connector_state;
> > > > > > > > + int i, ret, tile_grp_id = 0;
> > > > > > > > +
> > > > > > > > + if (INTEL_GEN(dev_priv) < 11)
> > > > > > > > + return 0;
> > > > > > > > +
> > > > > > > > + /* Is tiled, mark all other tiled CRTCs as needing a modeset */
> > > > > > > > + for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
> > > > > > > > + if (!connector->has_tile)
> > > > > > > > + continue;
> > > > > > > > + if (connector_state->crtc &&
> > > > > > > > + tile_grp_id != connector->tile_group->id) {
> > > > > > > > + crtc_state = drm_atomic_get_new_crtc_state(&state->base,
> > > > > > > > + connector_state->crtc);
> > > > > > > > + if (!drm_atomic_crtc_needs_modeset(crtc_state))
> > > > > > > > + continue;
> > > > > > > > +
> > > > > > > > + tile_grp_id = connector->tile_group->id;
> > > > > > > > + } else
> > > > > > > > + continue;
> > > > > > > > +
> > > > > > > > + ret = intel_dp_modeset_all_tiles(dev_priv, state, tile_grp_id);
> > > > > > > > + if (ret)
> > > > > > > > + return ret;
> > > > > > > > + }
> > > > > > > > +
> > > > > > > > + return 0;
> > > > > > > > +}
> > > > > > >
> > > > > > > BTW after some more pondering I don't think this alone is sufficient.
> > > > > > > The tile information may have already disppeared so I believe we also
> > > > > > > need to make sure we mark all currently synced crtcs as needing a
> > > > > > > modeset if any of them need a modeset. And I guess that's pretty much
> > > > > > > the same function we'll need to handle fastset correctly.
> > > > > > >
> > > > > >
> > > > > > The crtcs in the current state get synced and master/slave assignments happen in icl_add_sync_mode_crtcs before compute_config call
> > > > > > So are you suggesting basically moving this function after the crtcs are synced and then just setting modeset
> > > > > > to true for all synced crtcs if one of them needs modeset?
> > > > >
> > > > > I think it should look something like:
> > > > >
> > > > > modeset_tiled_things();
> > > > > modeset_synced_things();
> > > >
> > > > but modeset_synced_things() should be called after icl_add_sync_crtcs() which as per your review should be called
> > > > from within modeset_pipe_config just before compute_config() call.
> > > >
> > > > >
> > > > > for_each() {
> > > >
> > > > This is the for_each_crtc loop in intel_atomic_check() right?
> > > >
> > > > > modeset_pipes_config();
> > > >
> > > > So have icl_add_sync_crtcs outside of modeset_pipe_config()?
> > > >
> > > > > if (can_fastset()) {
> > > > > modeset=false;
> > > > > fastset=true;
> > > > > }
> > > > > }
> > > > >
> > > > > modeset_synced_things();
> > > > >
> > > > > for_each() {
> > > > > if (!modeset && fastset)
> > > > > copy_state();
> > > > > }
> > > > We already do this in the code right?
> > > >
> > > > Manasi
> > > >
> > > > >
> > > > > >
> > > > > > And why would the tile information be disappeared?
> > > > >
> > > > > It'll get updated whenever someone does a getconnector() or whatever.
> > > > >
> > > > > Example:
> > > > > 1. sync pipe A and B, pipe A is master
> > > > > 2. swap pipe B display for something else
> > >
> > > If we disconnect and connect other display for pipe B, port sync mode is off and
> > > Pipe A no longer a master and we would reset the master_slave assignments and conn on pipe B would not have tile
> >
> > Port sync will stay enabled until we do a modeset to disable it. In this
> > example there is never any modeset on pipe B until we add soemthing to
> > force one in step 4.
>
> seems to be working with the current intel_dp_add_modeset_tiles() since the moment
> we unplug, it goes through the disable sequence where all the associated tiles get disabled
> and port sync mode gets disabled. This happens because the Pipe A which is still connected now indicates
> a mode change since it fallsback to a lower non tiled mode.
>
> But to be on safer side, i can check if say Pipe A is a master or slave (in port sync mode) , check its crtc_state which is
> still showing the old master slave links since we havent cleared those yet and then add all other synced crtcs
> to the modeset?
>
> So the order of calls can still be :
> intel_atomic_check() {
>
> intel_dp_atomic_tiled_check() { modeset_all_tiles modeset_synced_crtcs}
> intel_modeset_pipe_Config()
> icl_add_sync_crtcs
> compute_config
> fastsetcheck()
> modeset_synced_things (here it looks at the new master slave assignments)
>
> Does this look correct, I want send this patch out today
>
> Manasi
>
> >
> > >
> > > so why we wold need to add both pipes to modeset in this case at all
> > >
> > > Manasi
> > >
> > > > > 3. getconnector() -> tile info goes poof
> > > > > 4. do something on pipe A that needs a modeset
> > > > > no tile info so we miss that pipe B also needs a modeset
> > > > >
> > > > > --
> > > > > Ville Syrjälä
> > > > > Intel
> > > > _______________________________________________
> > > > Intel-gfx mailing list
> > > > Intel-gfx at lists.freedesktop.org
> > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >
> > --
> > Ville Syrjälä
> > Intel
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list